Product Overview
The GE 6-Outlet Swivel Surge Protector Wall Tap is designed to expand a standard grounded duplex wall outlet into six grounded, three-prong outlets. This compact unit provides flexible power distribution and surge protection for your electronic devices. Its swivel outlets allow for easier plug placement, especially in tight spaces behind furniture or appliances. The unit incorporates 980 Joules of surge protection to safeguard connected electronics from power surges, voltage spikes, and electrical disturbances. Two LED indicators provide visual confirmation of the surge protector's status.
Image: Front view of the GE 6-Outlet Swivel Surge Protector Wall Tap, showing its compact design and six outlets.
Setup Instructions
- Identify a Suitable Outlet: Locate a standard, grounded 3-prong duplex wall outlet. Ensure the outlet is easily accessible and not obstructed.
- Plug in the Surge Protector: Insert the GE 6-Outlet Swivel Surge Protector directly into the chosen wall outlet. Ensure it is firmly seated.
- Verify LED Indicators: Once plugged in, observe the two LED indicators on the front of the unit.
- The "GROUNDED" indicator should illuminate green, confirming the wall outlet is properly grounded.
- The "PROTECTED" indicator should illuminate green, confirming the surge protection feature is active and functioning.
- Connect Devices: You can now connect your electronic devices to the available outlets. The swivel design allows you to rotate the outlet banks up to 90 degrees for optimal plug placement.
Image: The GE 6-Outlet Swivel Surge Protector plugged into a wall, demonstrating its compact profile and side-access capability.
Operating Instructions
Using Swivel Outlets
The GE 6-Outlet Swivel Surge Protector features two banks of three outlets each, which can rotate independently up to 90 degrees. This allows for flexible positioning of plugs, accommodating bulky adapters without blocking adjacent outlets. Simply grasp the side of an outlet bank and gently rotate it to the desired angle (front-facing or side-facing).
Image: The surge protector with its swivel outlets rotated to accommodate various plugs, illustrating flexible access.
Understanding LED Indicators
- GROUNDED (Green LED): This indicator confirms that the wall outlet to which the surge protector is connected is properly grounded. A proper ground connection is essential for effective surge protection. If this LED is off, the outlet may not be grounded, and the surge protector will not provide full protection. Consult a qualified electrician to inspect the wiring.
- PROTECTED (Green LED): This indicator confirms that the surge protection circuitry is active and functioning. As long as this LED is illuminated, your connected devices are protected from power surges. If this LED is off, it indicates that the surge protection components have been sacrificed to protect your equipment from a significant surge. The unit will continue to function as a multi-outlet adapter, but without surge protection. It is recommended to replace the unit to restore full protection.
Official Product Video
Video: An official product video demonstrating the features and usage of the GE 6-Outlet Swivel Surge Protector, including its swivel outlets and LED indicators.
Maintenance
The GE 6-Outlet Swivel Surge Protector requires minimal maintenance. Follow these guidelines to ensure its longevity and proper function:
- Cleaning: Before cleaning, ensure the surge protector is unplugged from the wall outlet and all devices are disconnected. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners, aerosols, or solvents, as these may damage the unit or pose an electrical hazard.
- Inspection: Periodically inspect the unit for any signs of damage, such as cracks in the casing or frayed wires. If any damage is observed, discontinue use immediately and replace the unit.
- No User-Serviceable Parts: This product contains no user-serviceable parts. Do not attempt to open or repair the unit, as this will void the warranty and could result in electrical shock or fire.
Troubleshooting
If you encounter issues with your GE 6-Outlet Swivel Surge Protector, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. |
|
|
| "GROUNDED" LED is off. |
|
|
| "PROTECTED" LED is off. |
|
|
Product Specifications
| Model Number | 81781 |
| Brand | GE |
| Total Power Outlets | 6 |
| Voltage | 125 VAC |
| Maximum Current | 15 A |
| Maximum Power | 1875 W |
| Surge Protection Rating | 980 Joules |
| Voltage Protection Rating (VPR) | 800V (L-N, L-G, N-G) |
| Plug Type | Type B (3-prong grounded) |
| Color | White |
| Material | Plastic |
| Item Weight | 0.34 kg |
| Certifications | ETL Listed, UL Safety Certified |
| Compatible Devices | Hair Dryer, Set Top Box, Freezer, Fax Machine, Modem, Iron, Tablet, Cellular Phone, Mixer Grinder, Microwave Oven, Gaming Console, Refrigerator, Smartwatch, Laptop, Projector, Radio, Air Conditioner, Television, Printer, Electric Fountain, Rice Cooker, Toaster, Lamp, DVD Player, MP3 Player, Home Theater, Light, E-Reader, Personal Computer, Smartphone, Router, Scanner, Speaker, Camera, Water Boiler, Monitor, Coffee Machine, Audio Sound System, Fan, Heater, Juicer |
Image: Diagram showing the dimensions of the GE 6-Outlet Swivel Surge Protector and its ETL certification mark.
Warranty Information
This GE 6-Outlet Swivel Surge Protector is backed by a Limited Lifetime Replacement Plan. Additionally, it includes a $100,000 Connected Equipment Policy. Please refer to the official product packaging or manufacturer's website for full details, terms, and conditions of the warranty and connected equipment policy. Keep your purchase receipt for warranty claims.
Customer Support
For further assistance, technical support, or warranty claims, please contact the manufacturer, Jasco Products Company.
- Manufacturer: Jasco Products Company
- Website: byjasco.com (Please check the website for current contact information and support options.)
- Phone: Refer to the manufacturer's website or product packaging for the most up-to-date customer service phone numbers.
When contacting support, please have your product model number (81781) and proof of purchase readily available.
