1. Introduction
The JUJIANG C026 Solar Gate Opener is a robust and efficient solution for automating single swing gates. Designed for gates up to 770 pounds in weight or 16 feet in length, this system provides convenience and enhanced security for various property types.
Key features include solar power capability with included batteries and solar panel, powerful 60W motors for stable operation, and a smart control box with advanced safety functions. Its durable design ensures reliable performance in diverse weather conditions.
Figure 1: Complete JUJIANG C026 Solar Gate Opener Kit
2. Safety Information
WARNING: Improper installation or use can lead to serious injury or death. Always follow all instructions and safety guidelines.
- Read the entire manual before installation and operation.
- Ensure the installation area is clear of obstructions and people during operation.
- Do not allow children to play near the gate opener or its controls.
- Regularly inspect the gate opener for signs of wear, damage, or misalignment.
- Disconnect power before performing any maintenance or repairs.
- The gate opener features a safety stop-and-reverse function. Ensure it operates correctly.
3. Package Contents
Verify that all components listed below are included in your package:
- Gate Opener Actuator(s)
- Control Box with pre-installed circuit board
- 2 x 12V7Ah Batteries
- 20W Solar Panel
- 2 x Remote Controls
- Mounting Parts and Hardware
- Manual Release Key
- Solar Charge Controller (inside control box)
Figure 2: Overview of included components
4. Installation
Installation of the JUJIANG C026 gate opener is designed to be straightforward with commonly available tools. The following sections provide detailed steps for key installation aspects.
4.1. Solar Panel Assembly
Proper assembly and positioning of the solar panel are crucial for efficient battery charging. The solar panel should be fixed in a proper position to maximize sunlight exposure.
Video 1: Solar System Connections (Full Assembly & Wiring Guide)
This video provides a comprehensive guide on assembling the solar panel and connecting it to the control unit. It covers connecting the red wire with '+' and blue wire with '-' on the solar panel, fixing the bracket, and positioning the panel.
Figure 3: Solar Panel Wiring Detail
4.2. Control Box Wiring
The control box houses the main circuit board, batteries, and solar charge controller. Proper wiring is essential for safe and functional operation. Refer to Video 1 for detailed wiring instructions.
- Install the 12V7Ah batteries into the designated compartments.
- Connect the battery wires (red to '+' and black to '-') to the control board.
- Connect the solar panel wires to the solar charge controller, ensuring correct polarity.
- Connect the solar charge controller to the control board.
- Connect the gate opener motor wires to the control board.
Figure 4: Control Box Internal Layout
4.3. Gate Opener Installation
The gate opener can be installed in either pull-to-open or push-to-open configurations, allowing flexibility for gates opening inwards or outwards. Ensure the actuator is securely mounted to both the gate and the gate post.
Figure 5: Pull-to-Open and Push-to-Open Installation Styles
Figure 6: Mounting Bracket Detail
4.4. Remote Control Programming
The included remote controls need to be programmed to operate your gate opener. The system supports up to 120 remotes.
Video 2: JUJIANG C026 Single Solar Gate Opener (Remote Programming)
This video demonstrates the process of programming new remote controls to your JUJIANG C026 gate opener. Follow the steps carefully to ensure successful pairing.
Figure 7: Remote Control
5. Operating Instructions
Once installed and programmed, operating your JUJIANG C026 gate opener is simple and convenient.
- Remote Control: Press the designated button on your remote control to open or close the gate. The remote has a maximum control distance of 100 feet.
- Auto-Close Feature: The system can be configured to automatically close the gate after a set period, enhancing security.
- Soft Start and Stop: This feature ensures smooth and quiet operation, reducing wear and tear on the motor and extending the lifespan of the gate opener.
- Obstacle Detection: The gate opener is equipped with a safety stop-and-reverse feature. If an obstruction is detected during opening or closing, the gate will stop or reverse its direction to prevent damage or injury.
Figure 8: Remote Control Operation
Figure 9: Enhanced Safety Features
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your gate opener.
- Cleanliness: Keep the gate opener and surrounding area free from debris, dirt, and vegetation that could obstruct movement.
- Lubrication: Periodically lubricate moving parts of the gate and the actuator arm as recommended by the gate manufacturer.
- Battery Check: Ensure the solar panel is clean and free of obstructions to allow for optimal charging. Check battery terminals for corrosion.
- Hardware Inspection: Regularly check all mounting hardware, bolts, and connections for tightness. Tighten as necessary.
- Safety Feature Test: Periodically test the safety stop-and-reverse feature by placing a soft object in the gate's path during operation.
7. Troubleshooting
If you encounter issues with your JUJIANG C026 Solar Gate Opener, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate not responding to remote | Dead remote battery, remote not programmed, power issue. | Replace remote battery. Reprogram remote (see Section 4.4). Check power supply to control box. |
| Gate operates intermittently | Low battery charge, solar panel obstruction, loose wiring. | Ensure solar panel is clean and receives direct sunlight. Check all wiring connections (see Section 4.2). Fully charge batteries before first use. |
| Gate stops or reverses unexpectedly | Obstruction in gate path, safety sensor issue. | Clear any obstructions. Inspect safety sensors for damage or misalignment. |
| Gate does not close completely | Misalignment, obstruction, limit switch adjustment needed. | Check gate alignment. Clear obstructions. Adjust limit switches as per detailed manual (not covered here). |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PKM-C026-400 |
| Brand | JUJIANG |
| Max Gate Weight | 770 lbs (350 KG) |
| Max Gate Length | 16 ft (5 M) |
| Motor Power | 60W |
| Power Source | Solar Powered (2 x 12V7Ah Lead Acid Batteries included) |
| Solar Panel | 20W |
| Remote Control Distance | Up to 100 ft |
| Max Remotes Supported | 120 |
| Weather Resistance | IP55 (Waterproof & Dustproof) |
| Operating Temperature | -7°F to 131°F (-21°C to 55°C) |
| Item Weight | 46.2 pounds |
| Product Dimensions | 20 x 11 x 38 inches |
9. Warranty & Support
JUJIANG is committed to providing excellent customer service and support for your gate opener.
- Warranty: This product comes with a 12-month warranty from the date of purchase.
- Returns & Exchange: Enjoy a 30-day worry-free exchange and return policy.
- Technical Support: Lifetime technical support is available for any questions or assistance you may need. Please contact JUJIANG customer service for professional solutions.
