1. Introduction
Thank you for choosing the Ledvion Solar LED Table Lamp. This modern, cone-shaped LED table lamp is powered by solar energy, offering an eco-friendly and atmospheric lighting solution for your outdoor spaces. With an IP44 rating, it is designed for outdoor use, such as in gardens or on terraces, and is resistant to various weather conditions. This manual provides essential information for the safe and efficient use of your new solar lamp.
Image 1.1: Ledvion Solar LED Table Lamp in a garden setting.
2. Safety Information
- Read all instructions carefully before first use.
- Do not attempt to disassemble, repair, or modify the product. This may void the warranty and pose safety risks.
- Ensure the solar panel is exposed to direct sunlight for optimal charging.
- Keep the product away from open flames or extreme heat sources.
- Dispose of the product and its battery responsibly according to local regulations.
3. Package Contents
Verify that all components are present in the package:
Image 3.1: Illustration of package contents.
- 1x Ledvion Solar LED Table Lamp (Model LVS10030)
- 1x Instruction Manual
4. Setup
4.1 Initial Charging
Before first use, place the solar lamp in a location where the solar panel can receive direct sunlight for at least 6-8 hours. This ensures the internal battery is fully charged for optimal performance.
Image 4.1: The durable solar panel on top of the lamp.
4.2 Placement
Choose a location for your solar lamp that receives ample direct sunlight throughout the day. Avoid placing it under eaves, trees, or other obstructions that might block sunlight, as this will affect charging efficiency and operating time.
5. Operating Instructions
5.1 Power On/Off
The lamp features an integrated on/off button, typically located near the solar panel. Press this button to activate the lamp. Once activated, the lamp will automatically turn on at dusk and turn off at dawn, provided it has received sufficient charge during the day.
Image 5.1: Location of the On/Off button.
5.2 Automatic Operation
The Ledvion Solar LED Table Lamp is equipped with a light sensor. After initial activation, it will automatically detect ambient light levels. It will illuminate when it gets dark and switch off when light returns or the battery is depleted.
Image 5.2: Lamp operating at night, showcasing warm light and battery life.
6. Maintenance
6.1 Cleaning
Regularly clean the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures maximum charging efficiency. Do not use abrasive cleaners or solvents.
6.2 Weather Resistance
The lamp has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. While it is weather-resistant, prolonged exposure to extreme weather conditions (e.g., heavy storms, blizzards) may reduce its lifespan. Consider bringing it indoors during severe weather.
Image 6.1: The lamp's IP44 water and dust resistance.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on at night. | Insufficient solar charge. | Ensure the solar panel is clean and placed in direct sunlight for 6-8 hours. |
| Lamp turns off too quickly. | Partial charge or reduced battery capacity. | Allow for a full day of direct sunlight charging. Battery life may vary with age and environmental conditions. |
| Lamp flickers or is dim. | Low battery charge. | Relocate the lamp to an area with more direct sunlight for charging. |
| Lamp stays on during the day. | Light sensor obstructed or faulty. | Ensure no objects are covering the light sensor. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LVS10030 |
| Brand | Ledvion |
| Light Source Type | LED (Light Emitting Diode) |
| Power Source | Solar |
| Color Temperature | 3000 Kelvin (Warm Light) |
| Luminosity | 20 lm |
| Material | Iron |
| Finish Type | Powder or Paint |
| Water Resistance Level | IP44 (Splash-proof) |
| Battery Life (Full Charge) | Up to 36 hours (or 9.5 hours as per image) |
| Charging Time (Full) | 6-8 hours (direct sunlight) |
| Product Dimensions (L x W x H) | 160 x 160 x 240 mm (approx. 220 x 160 x 160 cm in product data, but image shows 160mm diameter, 240mm height) |
| Item Weight | 830 Grams |
| Shape | Cone |
Note: The product dimensions from the specifications (220 x 160 x 160 cm) appear to be an error, likely intended as millimeters. The image indicates a diameter of 160mm and height of 240mm.
Image 8.1: Product dimensions.
9. Warranty
This Ledvion Solar LED Table Lamp comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Image 9.1: Warranty information.
10. Customer Support
For any questions, concerns, or technical assistance regarding your Ledvion Solar LED Table Lamp, please contact your retailer or visit the official Ledvion website for support information. When contacting support, please have your model number (LVS10030) and proof of purchase ready.