Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fisher & Paykel Refrigerator Filter Kit 885345P. This genuine Original Equipment Manufacturer (OEM) part is designed to perfectly fit various Fisher & Paykel refrigerator models, ensuring clean and safe drinking water by removing impurities and contaminants. It is a direct replacement for parts 847612 and 864164.
Safety Information
- Always disconnect power to the refrigerator before attempting any installation or maintenance.
- Turn off the water supply to the refrigerator before beginning installation to prevent leaks.
- Ensure all connections are secure to prevent water leaks.
- Do not use tools to overtighten plastic fittings, as this can cause damage.
- Keep the filter kit and its components out of reach of children.
- Dispose of old filters according to local regulations.
Package Contents
Figure 1: Overview of the Fisher & Paykel Refrigerator Filter Kit 885345P components. This image displays the main water filter cartridge, a length of gray tubing, a blue tube, various connectors, and mounting clips, all essential for the filter's installation and operation.
Your Fisher & Paykel Refrigerator Filter Kit 885345P includes the following components:
- 1 x Water Filter Cartridge (885345P)
- 1 x Water Line Tubing (Gray)
- 1 x Water Line Tubing (Blue)
- Various Connectors and Fittings
- Mounting Clips/Brackets
Setup and Installation
This filter kit is compatible with Fisher & Paykel refrigerator models E522B, RF135, RF201, and RF170. Follow these steps for proper installation:
- Prepare the Refrigerator: Disconnect the refrigerator from the power supply. Turn off the main water supply valve to the refrigerator.
- Locate Existing Filter (if applicable): If replacing an old filter, locate it and prepare for removal. Place a towel or shallow pan underneath to catch any residual water.
- Disconnect Old Filter: Carefully disconnect the water lines from the old filter. Note the direction of water flow if indicated.
- Install New Filter:
- Identify the inlet and outlet ports on the new filter. Water typically flows from the water supply into the filter's inlet and out from the filter's outlet to the refrigerator.
- Connect the water supply line to the filter's inlet port using the provided fittings. Ensure a secure, leak-free connection.
- Connect the refrigerator's water line to the filter's outlet port.
- Use the mounting clips/brackets to secure the filter in a suitable location, ensuring it is easily accessible for future replacement.
- Restore Water and Power: Slowly turn on the main water supply valve to the refrigerator. Check all connections for leaks. Once confirmed, reconnect the refrigerator to the power supply.
- Flush the System: Dispense approximately 4-5 gallons of water through the refrigerator's dispenser to flush out any air or carbon fines from the new filter. This may take several minutes. The water may appear cloudy initially; this is normal and will clear up.
- Check for Leaks Again: After flushing, re-check all connections for any signs of leaks.
Operating Instructions
Once installed and flushed, the filter operates automatically, providing filtered water to your refrigerator's dispenser and ice maker. No further user interaction is required for daily operation.
Maintenance
To ensure optimal performance and water quality, it is recommended to replace the water filter cartridge every 6 months or sooner if water flow significantly decreases or taste/odor issues arise. Refer to your refrigerator's user manual for specific filter replacement indicators.
Filter Replacement Procedure:
- Turn off the water supply to the refrigerator and disconnect power.
- Place a towel or shallow pan under the filter to catch any drips.
- Disconnect the old filter from the water lines.
- Install the new 885345P filter following the "Setup and Installation" steps.
- Flush the new filter as described in the installation section.
- Reset the filter indicator light on your refrigerator, if applicable (refer to your refrigerator's manual).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow water flow from dispenser | Clogged filter, kinked water line, low water pressure. | Replace filter, check water lines for kinks, ensure water supply valve is fully open. |
| Water leaks at connections | Loose fittings, damaged O-rings, incorrect installation. | Ensure fittings are hand-tightened securely, check O-rings for damage and replace if necessary, re-install filter following instructions. |
| Cloudy or discolored water (initial use) | Air in the system, carbon fines from new filter. | Flush 4-5 gallons of water through the dispenser until clear. This is normal for new filters. |
| Unusual taste or odor in water | Filter nearing end of life, improper flushing. | Replace filter, ensure proper flushing after installation. |
Specifications
| Model Number | 885345P |
| Brand | Fisher & Paykel |
| Material | Plastic |
| Product Dimensions | 15"D x 3"W x 12"H |
| Item Weight | 1.26 pounds (0.57 Kilograms) |
| External Testing Certification | NSF |
| Product Benefits | Removes impurities and contaminants for safer, cleaner drinking water |
| UPC | 822843965854 |
Warranty and Support
As a genuine Fisher & Paykel replacement part, this filter kit is covered by the standard Fisher & Paykel warranty for replacement parts. For specific warranty details, technical support, or assistance with installation, please contact Fisher & Paykel customer service directly or visit their official website.
You can find contact information and further resources on the official Fisher & Paykel website: www.fisherpaykel.com