Fessiconys S9S 2-Axis Gimbal GPS Drone User Manual

1. Introduction

This user manual provides comprehensive instructions for the safe operation, setup, maintenance, and troubleshooting of your Fessiconys S9S 2-Axis Gimbal GPS Drone. Designed for both adults and beginners, this quadcopter features a 4K EIS camera, brushless motors, and advanced flight capabilities. Please read this manual thoroughly before your first flight to ensure optimal performance and safety.

2. Safety Guidelines

Adhering to these safety guidelines is crucial for preventing accidents and ensuring the longevity of your drone:

• Pre-Flight Check: Always ensure all components are securely attached and batteries are fully charged before each flight.
• Environmental Conditions: Fly in open areas away from obstacles, people, and animals. Avoid flying in strong winds (Level-5 wind resistance is supported, but extreme conditions should be avoided) or adverse weather conditions.
• GPS Signal: For outdoor flights, ensure a strong GPS signal (over 6 satellites) before takeoff. Perform geomagnetic and gyro calibration as instructed. For indoor flights, turn off GPS.
• Obstacle Avoidance: The drone features 360° obstacle avoidance. While this provides protection, always maintain visual line of sight and be prepared to take manual control.
• Battery Safety: Use only original batteries and charging cables. Do not overcharge or puncture batteries.
• Respect Privacy: Be mindful of privacy laws and regulations when capturing aerial footage.

3. Package Contents

Verify that all items listed below are included in your package:

• Drone x1
• Obstacle Avoidance Module x1
• Remote Control x1
• Battery x2 (1 in the drone)
• Extra Propellers x4
• Charging Cable x1
• Screws x4
• Screwdriver x1
• Camera Protector x1
• Cell Phone Holder x1
• Portable Case x1

Image: The Fessiconys S9S drone, remote control, two batteries, extra propellers, and a portable carrying case.

4. Setup Guide

4.1 Initial Drone and Remote Setup

1. Unpack: Carefully remove the drone and remote control from the carrying case.
2. Unfold Wings: Gently unfold the drone's wings until they lock into place.
3. Remove Camera Protection: Remove the camera protection cover from the gimbal.
4. Power On Drone: Long press the power switch on the drone to turn it on. The lights will begin flashing.
5. Power On Remote: Turn on the remote control switch. The remote will beep, indicating successful frequency matching with the drone.
6. Place on Level Ground: Place the drone on a flat, level surface. Allow 1-2 minutes for automatic frequency synchronization.

4.2 Calibration

Calibration is essential for stable flight. Ensure both gyroscope and geomagnetic calibrations are completed before flying, especially outdoors.

1. Gyroscope Calibration: Press the gyroscope calibration button on the remote control. The drone's lights will flash continuously and then become constant, indicating successful calibration.
2. Geomagnetic Calibration: Press the geomagnetic calibration button on the remote. Pick up the drone and perform a clockwise horizontal rotation until it beeps, then perform a vertical rotation until it beeps again. The front and rear lights will remain on, indicating successful geomagnetic calibration.

4.3 APP and Wi-Fi Connection

1. Download App: Scan the QR code in the manual or search for "VS GPS PRO" in your mobile phone's app store to download the application.
2. Connect Wi-Fi: Open your phone's Wi-Fi settings and search for the drone's Wi-Fi network, which typically starts with "VS-GPS-". Connect to this network.
3. Open App: Open the VS GPS PRO app. Ensure the remote control antenna is extended to maintain optimal signal strength and control distance.
4. GPS Signal Check: Within the app, verify that the GPS signal indicates 15 or more satellites before attempting to fly.

5. Operating Instructions

5.1 Drone Unlocking

To unlock the drone's motors, simultaneously move both joysticks on the remote control outwards and downwards (unlocking in eight directions). The propellers will begin to spin slowly.

5.2 Takeoff and Landing

• One Key Takeoff: After unlocking, press the One Key Takeoff/Land button on the remote control or within the app. The drone will automatically ascend to a safe altitude.
• Manual Takeoff: After unlocking, slowly push the left joystick (throttle) upwards to ascend.
• Landing: Press the One Key Takeoff/Land button again, and the drone will automatically descend and land. Alternatively, slowly pull the left joystick (throttle) downwards to land manually.

6. Flight Features

6.1 2-Axis Gimbal with 4K EIS Camera

The Fessiconys S9S drone is equipped with a 2-axis gimbal and Electronic Image Stabilization (EIS) for capturing stable 4K/30fps images and videos. This technology significantly reduces shake and blur, ensuring high-quality aerial footage.

Image: Demonstrates the 4K stable image capability of the drone's 2-Axis Gimbal and EIS, showing a clear image compared to an unstable one.

6.2 Powerful GPS Functions

Utilizing GPS and Optical Flow Positioning, the drone offers precise control and intelligent return-to-home functions:

• One Key Return: Initiates an automatic return to the takeoff point with a single button press.
• Signal Loss Return: The drone will automatically return to its takeoff point if the control signal is lost.
• Low Battery Return: The drone will automatically return to its takeoff point when the battery level is critically low.

Image: Highlights the GPS capabilities of the drone, including automatic return functions for signal loss, low battery, and one-key activation.

6.3 360° Obstacle Avoidance

The drone is equipped with 360° laser obstacle avoidance, allowing it to automatically detect and maneuver around obstacles during flight, providing enhanced safety and a worry-free flying experience.

Image: Illustrates the drone's 360° obstacle avoidance system, showing red arrows indicating detection and avoidance of surrounding objects.

6.4 Extended Flight Time

With two high-capacity 7.4V/1600mAh intelligent batteries included, the Fessiconys S9S offers up to 50 minutes of flight time (2x 25 minutes per battery), allowing for extended exploration and capture of moments.

Image: Shows the drone with an emphasis on its battery compartment, indicating a maximum flight time of 50 minutes (2x 25 min).

6.5 Additional Smart Functions

The Fessiconys S9S drone offers a variety of intelligent flight modes for enhanced user experience:

• 5G Transmission: Provides stable and clear real-time video transmission to your mobile device.
• Circle Fly: The drone will fly in a circular path around a designated point, capturing 360° footage.
• Waypoint Fly: Draw a custom flight path on the app map, and the drone will follow the specified route.
• Headless Mode: Eliminates the need to adjust the drone's position before flight, making it easier for beginners.
• Follow Me: The drone will automatically follow the remote controller or a designated subject, capturing dynamic footage.
• Gesture Photo/Video: Perform specific hand gestures to trigger photo or video recording.
• APP Control: Full control and access to advanced features via the dedicated mobile application.

Image: Displays icons representing various drone functions such as 4K Camera, GPS, Follow Me, Fly Around, Tap-Fly, Beginner Mode, Level-5 Wind Resistance, Headless Mode, One Key Start, and Altitude Hold.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your drone:

• Cleaning: Gently wipe the drone and camera lens with a soft, dry cloth after each use. Avoid using harsh chemicals.
• Propeller Inspection: Regularly check propellers for any damage (cracks, bends). Replace damaged propellers immediately using the provided spares and screwdriver.
• Battery Care: Store batteries in a cool, dry place. Do not fully discharge batteries for extended periods. Charge them periodically if not in use.
• Storage: When not in use, store the drone and all accessories in the portable case to protect them from dust and physical damage.

8. Troubleshooting

If you encounter issues with your Fessiconys S9S drone, refer to the following common problems and solutions:

If you continue to experience issues, please refer to the video tutorials or contact Fessiconys customer support for assistance.

9. Specifications

10. Warranty and Support

For any issues or questions regarding your Fessiconys S9S drone, please contact Fessiconys customer support. We are committed to assisting you within 24 hours to resolve any concerns and ensure your satisfaction.

Please refer to your purchase documentation for specific warranty details.