1. Product Overview
These ReplacementScrews shelf support pins are designed as direct replacements for IKEA Part 131295, commonly found in FJALKINGE shelving units. Crafted from high-quality zinc alloy, these pegs provide robust and reliable support for your shelves, ensuring stability and durability.
Each pack contains 16 zinc alloy holder pegs, offering a tailored quantity for various assembly needs and reducing waste. Their precise measurements ensure a secure fit without wobbling.
Image: A pack of ReplacementScrews zinc alloy shelf support pins, showing their metallic finish and design.
2. Compatibility
These shelf support pins are fully compatible with IKEA part number 131295, which is frequently used in FJALKINGE shelving units. Before installation, it is recommended to consult your furniture's assembly manual to verify the exact part number required for your specific unit.
3. Setup and Installation
Installation of these shelf support pins is straightforward and requires no special tools. Follow these steps for a secure assembly:
- Identify Pre-drilled Holes: Locate the pre-drilled holes in your furniture where the shelf support pins are to be inserted.
- Insert Pins: Gently press each pin into the designated pre-drilled holes. Ensure the flat part of the pin faces upwards to support the shelf panel.
- Secure Placement: Apply firm, even pressure until the pin is fully seated and locked into place. The design ensures a secure fit without wobbling.
- Shelf Placement: Once all pins are installed, carefully place your shelf panel onto the pins. Ensure it rests evenly and securely.
A typical assembly may require up to 16 pieces, depending on the size and design of your furniture unit. Always refer to your furniture's original manual for the exact number of pins needed for each shelf.
Image: A close-up view of a single shelf support pin, illustrating its dimensions (21mm tall, 15mm deep, 2.5mm diameter pin).
4. Operating Instructions
Once installed, the shelf support pins function by providing a stable and level base for your shelves. They are designed to hold the shelf panels securely in place, preventing movement and ensuring the structural integrity of your shelving unit. No further operational steps are required beyond proper installation.
5. Maintenance
These zinc alloy shelf support pins are designed for long-lasting quality and performance with minimal maintenance. The material offers resistance to corrosion, ensuring durability over time.
- Cleaning: If necessary, wipe the pins with a dry or slightly damp cloth to remove dust or debris. Avoid harsh chemicals.
- Inspection: Periodically check the pins to ensure they remain securely seated in their holes and that shelves are stable.
- Replacement: If a pin becomes damaged or lost, replace it with a new ReplacementScrews shelf support pin to maintain the stability of your shelving unit.
6. Troubleshooting
- Pins do not fit into holes:
Ensure you have the correct part number. These pins are specifically designed for IKEA Part 131295. Verify the diameter of your furniture's pre-drilled holes. The pin diameter is approximately 2.5 mm (~3/32").
- Shelves are wobbly or unstable:
Check that all shelf support pins are fully inserted and securely seated in their respective holes. Ensure the correct number of pins is used for each shelf as per your furniture's assembly instructions. Verify that the shelf panel is correctly aligned and resting evenly on all pins.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | RSAZN7068429 |
| Compatibility | IKEA Part 131295 (FJALKINGE shelving units) |
| Material | High-quality Zinc Alloy |
| Overall Height | Approximately 21 mm (~3/4 inch) |
| Depth (from front to back) | Approximately 15 mm (~5/8 inch) |
| Pin Diameter | Approximately 2.5 mm (~3/32 inch) |
| Item Weight (per pack) | 1.76 ounces (for a pack of 16) |
| Package Dimensions | 6.5 x 3.75 x 0.75 inches |
8. Warranty and Support
Warranty Information: No specific warranty information is provided in the product details. For details regarding product warranty, please contact ReplacementScrews customer service directly.
Customer Support: If you have any questions, require assistance with installation, or need to report an issue, please visit the ReplacementScrews Store on Amazon or contact their customer service through the platform where the product was purchased.