1. Introduction
Thank you for choosing the Relaxdays Umbrella Stand. This heavy-duty base is designed to securely hold your garden umbrella, providing stable shade for your outdoor spaces such as gardens, patios, and balconies. Its robust construction and adaptable design ensure reliable performance.
This manual provides essential information for the safe and correct assembly, operation, and maintenance of your umbrella stand. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Ensure the umbrella stand is placed on a flat, stable, and level surface to prevent tipping.
- Always close your umbrella in strong winds or adverse weather conditions to prevent damage to the umbrella, stand, or surrounding property.
- Do not attempt to move the umbrella stand while an umbrella is inserted, especially if the umbrella is open.
- Keep children and pets away from the umbrella stand during assembly and operation.
- Regularly check all connections and fasteners to ensure they are tight and secure.
- This product is designed for holding garden umbrellas only. Do not use it for other purposes.
3. Package Contents
Please check that all items are present and in good condition:
- 1 x Relaxdays Umbrella Stand Base
- 2 x Pole Adapters (plastic inserts for different pole thicknesses)
- Mounting Material (e.g., tightening screw)
Note: Umbrellas and other decorative items are not included.
4. Setup Instructions
The Relaxdays Umbrella Stand is designed for minimal assembly. Follow these steps to prepare your stand for use:
- Choose a Location: Select a flat, stable, and level surface in your garden, patio, or balcony where you intend to place the umbrella stand.
- Insert Pole Adapter: The stand comes with two plastic pole adapters. Choose the adapter that best fits the diameter of your umbrella pole (suitable for poles between 38mm and 50mm). Insert the chosen adapter into the top opening of the stand's pole receiver tube.
- Secure the Adapter: Ensure the adapter is seated firmly within the receiver tube.
5. Operating Instructions
Once the stand is set up, you can insert your umbrella:
- Insert Umbrella Pole: Carefully lower your umbrella pole into the pole receiver tube, through the inserted adapter, until it rests firmly at the bottom.
- Tighten Securing Screw: Locate the tightening screw on the side of the pole receiver tube. Turn the screw clockwise until it firmly presses against the umbrella pole, securing it in place. Do not overtighten.
- Check Stability: Gently rock the umbrella pole to ensure it is securely held and the stand is stable.
6. Maintenance
To ensure the longevity and appearance of your umbrella stand, follow these maintenance guidelines:
- Cleaning: Wipe the stand with a damp cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspection: Periodically inspect the stand for any signs of wear, damage, or loose components. Tighten any screws as necessary.
- Storage: During prolonged periods of non-use or in harsh winter conditions, it is recommended to store the umbrella stand indoors or cover it to protect it from extreme weather.
7. Troubleshooting
- Umbrella Pole is Loose: Ensure the correct plastic adapter is used for your pole's diameter. Fully tighten the securing screw. If the pole is still loose, consider adding shims around the pole inside the adapter for a tighter fit.
- Stand is Unstable: Verify that the stand is placed on a completely flat and level surface. Relocate if necessary. Ensure no debris is underneath the base.
- Difficulty Inserting Pole: Check if the correct adapter is used. Ensure there are no obstructions inside the pole receiver tube or adapter.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 10049356 |
| Dimensions (Height x Depth) | Approx. 32 cm x 50 cm (12.6 in x 19.7 in) |
| Holder Tube Height | Approx. 25 cm (9.8 in) |
| Compatible Pole Diameter | Approx. 38 - 50 mm (1.5 - 2.0 in) |
| Materials | Polyethylene Plastic, Cast Iron |
| Weight | Approx. 14.72 kg (32.45 lbs) |
| Color | Black |
| Assembly Required | No (minimal setup for umbrella pole) |
9. Warranty Information
Specific warranty details for this product may vary by region and retailer. Please refer to your purchase documentation or contact the retailer where you purchased the product for information regarding warranty coverage and terms.
10. Support
For further assistance, questions, or to report any issues with your Relaxdays Umbrella Stand, please contact the customer service department of your retailer. You may also visit the official Relaxdays website for general product information and support resources.