Sony SU-WL900 Rotatable TV Wall Mount Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Sony SU-WL900 Rotatable TV Wall Mount. Please read this manual thoroughly before installation and keep it for future reference.

Key Features

• Adapts to your room, allowing the TV to sit close to the wall.
• Pivots up to 21 degrees for comfortable viewing angles and easy access to connections.
• Integrated cable management system to keep cables organized and hidden.
• Compatible with the Sony SU-WB1 soundbar bracket (sold separately) for a cohesive setup.

Safety Information

WARNING: Improper installation may result in serious personal injury or damage to your equipment. If you do not understand these instructions, or have doubts about the safety of the installation, contact a qualified installer.

• Ensure the wall structure can safely support the combined weight of the mount and the television.
• Do not exceed the maximum load capacity of 60 kg (132 lbs).
• Always use appropriate tools and follow all steps carefully.
• Keep small parts away from children.

Package Contents

Verify that all components are present before beginning installation. Refer to the diagram below for an overview of the main parts.

Figure 1: Exploded view of the Sony SU-WL900 wall mount components, showing the main bracket, TV attachment arms, and wall plate.

The package typically includes:

• Wall Plate Assembly
• TV Bracket Arms
• Mounting Hardware (screws, anchors, washers)
• Installation Template
• Instruction Manual (this document)

Setup and Installation

Follow these steps carefully to ensure a secure and proper installation of your Sony SU-WL900 TV wall mount.

1. Prepare the Wall

• Determine the optimal mounting height and position for your television.
• Use a stud finder to locate wall studs if mounting on a wooden stud wall. For concrete or brick walls, use appropriate anchors (not always included, check your specific package).
• Attach the provided installation template to the wall using tape, ensuring it is level.
• Mark the drilling locations through the template.

2. Install the Wall Plate

• Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and chosen anchors/screws.
• Secure the wall plate firmly to the wall using the appropriate screws and washers. Ensure it is level and tightly fastened.

3. Attach TV Bracket Arms to Television

• Carefully place your television face down on a soft, clean surface.
• Attach the TV bracket arms to the VESA mounting holes on the back of your television using the provided screws. Ensure the arms are oriented correctly (refer to the TV's manual for VESA pattern).

Figure 2: Side view illustrating a television securely mounted on the SU-WL900 wall mount, with a compatible soundbar positioned beneath it, demonstrating the minimal gap from the wall.

4. Mount the Television to the Wall Plate

• With assistance, carefully lift the television and hook the TV bracket arms onto the wall plate.
• Engage any safety locks or mechanisms to secure the television to the wall mount.
• Gently test the mount's stability before releasing the television completely.

Optional: Soundbar Bracket Installation

If you are using the compatible SU-WB1 soundbar bracket (sold separately), install it according to its specific instructions, typically attaching it to the TV bracket arms before mounting the TV.

Figure 3: Exploded view showing the Sony SU-WL900 wall mount components alongside the optional SU-WB1 soundbar bracket, illustrating how they integrate for a combined TV and soundbar mounting solution.

Operating the Mount

The Sony SU-WL900 wall mount offers flexibility for optimal viewing.

Pivoting Function

• Gently grasp the sides of your television and pivot it to the desired viewing angle. The mount allows for rotation up to 21 degrees.
• Avoid excessive force when adjusting the TV.

Cable Management

• Utilize the integrated cable guides on the mount to route and conceal your television's cables.
• Ensure cables have enough slack to accommodate the full range of motion when pivoting the TV.

Maintenance

To ensure the longevity and proper function of your wall mount:

• Periodically check all screws and fasteners to ensure they remain tight.
• Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Do not lubricate any moving parts unless specifically instructed by Sony.

Troubleshooting

If you encounter issues with your wall mount, refer to the following common solutions:

• TV is not level: Ensure the wall plate was installed level. Some mounts allow for minor post-installation leveling adjustments; consult the specific instructions for your model.
• Mount feels loose: Re-check all mounting screws on both the wall plate and the TV bracket arms. Ensure they are securely tightened. Do not overtighten.
• Difficulty pivoting: Ensure no cables are snagged or obstructing the movement. If the mount feels stiff, check for any debris.

If problems persist, contact Sony customer support.

Specifications

Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Sony website. For technical support or assistance with installation, please contact Sony customer service.

Sony Customer Support: www.sony.com/electronics/support