1. Introduction
This manual provides essential information for the safe and efficient operation of your Tawelun LED 150W Beam Moving Head DJ Light. Please read these instructions thoroughly before installation and use, and retain them for future reference. This device is designed for professional stage lighting applications, offering dynamic beam effects, color changes, and pattern projections.
2. Safety Information
- Electrical Safety: Ensure the power supply matches the specified voltage (AC100-240V, 50-60Hz). Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
- Heat Management: The fixture generates heat during operation. Ensure adequate ventilation and do not block cooling vents. Maintain a safe distance from flammable materials.
- Eye Protection: Do not look directly into the light source. The intense light can cause eye damage.
- Installation: Install the fixture securely using appropriate mounting hardware. Ensure the mounting surface can support the weight of the device. This product is rated IP20 for indoor use only.
- Handling: Avoid dropping or subjecting the unit to severe impact. Do not operate if the housing or cables are damaged.
- Qualified Personnel: Installation, maintenance, and repair should only be performed by qualified technicians.
3. Package Contents
- Tawelun LED 150W Beam Moving Head DJ Light
- Power Cable
- Instruction Manual
- Bulb (pre-installed)
4. Product Overview
The Tawelun LED 150W Beam Moving Head DJ Light is a versatile stage lighting fixture featuring a powerful 150W white LED light source complemented by a 44-piece 0.2W RGB light strip for additional effects. It offers a wide range of dynamic lighting capabilities including precise pan and tilt movements, a rich color palette, diverse pattern projections, and prism effects.
Figure 4.1: Front view of the Tawelun LED 150W Beam Moving Head DJ Light. This image shows the main light fixture with its lens and the surrounding RGB light strip, which can produce various colors.
Figure 4.2: Rear view of the light fixture. This image highlights the DMX input and output ports, along with the power connection, essential for linking multiple units and controlling the light.
Figure 4.3: Side view with dimensions. This image provides a clear perspective of the light's physical size, indicating its height, length, and width for installation planning.
5. Setup
- Unpacking: Carefully remove the fixture from its packaging. Inspect for any damage during transit.
- Placement: Position the light on a stable, level surface or securely mount it to a truss or ceiling using appropriate clamps and safety cables. Ensure sufficient space for ventilation and movement.
- Power Connection: Connect the provided power cable to the fixture's power input and then to a suitable grounded power outlet (AC100-240V, 50-60Hz).
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the fixture's DMX IN port. If linking multiple fixtures, connect from the first fixture's DMX OUT to the next fixture's DMX IN, and so on.
- Addressing: Set the DMX address for each fixture using the onboard digital display or LCD screen, following the instructions in the Operating section.
6. Operating Instructions
The Tawelun LED 150W Beam Moving Head DJ Light offers multiple control modes for versatile operation.
6.1 Control Modes
- DMX Control: Use an external DMX512 controller to access all features. The fixture supports 13/15 international standard DMX channels. Refer to the DMX channel chart (not included in this general manual, typically provided separately) for specific functions.
- Master/Slave Mode: Link multiple fixtures together. One unit acts as the master, controlling the others (slaves) for synchronized effects without a DMX controller.
- Auto-Programmed Mode (Self-Propelled): The fixture runs through pre-programmed sequences automatically.
- Sound-Activated Mode (Voice Control): The light reacts to sound and music via a built-in microphone.
- Remote Control / APP Control: Specific models may include remote control or smartphone app compatibility for basic functions.
6.2 Key Features and Adjustments
- Color Palette: Features 7 colors plus white light, allowing for a wide range of atmospheric effects.
- Pattern Plate (Gobo): Includes 11 distinct patterns plus circular patterns for projecting various shapes.
- Prism Effects: Equipped with an 18-prism effect and 6+12 rainbow prism, creating multi-faceted light beams.
- Focusing: Manual focusing allows for sharp or soft edge beam adjustments.
- Dimming: Linear dimming from 0% to 100% for precise brightness control.
- Strobe: Adjustable flash speed from 1-20Hz per second.
- Movement: Horizontal (Pan) movement from 0-540 degrees and Vertical (Tilt) movement from 0-200 degrees, with adjustable rotation speed.
Figure 6.1: Examples of color and pattern projections. This image displays a variety of colors and gobo patterns that the light can produce, showcasing its versatility.
Figure 6.2: Dynamic light effects. This image illustrates more complex and dynamic lighting scenarios, including multiple beams and intricate pattern overlays.
Figure 6.3: Wide-angle color beams. This image shows the light's ability to project broad, vibrant beams across a stage in various solid colors.
Video 6.1: Demonstration of the Tawelun LED 150W Moving Head DJ Light in action. This video showcases the various color changes, beam movements, and pattern effects the light can produce during a performance.
7. Maintenance
- Cleaning: Regularly clean the lens and housing with a soft, lint-free cloth. For stubborn dirt, use a mild glass cleaner. Ensure the unit is powered off and cool before cleaning.
- Fan and Vent Cleaning: Periodically use compressed air to clear dust from cooling vents and fans to ensure proper airflow and prevent overheating.
- Cable Inspection: Check power and DMX cables for any signs of wear, cuts, or damage before each use. Replace damaged cables immediately.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; no power from outlet; fuse blown. | Check power cable connection; test outlet; replace fuse if necessary. |
| Light not responding to DMX | Incorrect DMX address; faulty DMX cable; DMX controller issue; DMX termination missing. | Verify DMX address settings; check DMX cable integrity; ensure DMX controller is functioning; add a DMX terminator to the last fixture in the chain. |
| Fixture movement erratic or limited | Mechanical obstruction; DMX signal interference; internal error. | Check for obstructions; ensure DMX cables are not near power cables; perform a factory reset or contact support. |
| Light output dim or inconsistent | Lens dirty; LED light source degradation; power supply issue. | Clean the lens; contact support for LED replacement or power supply check. |
| Overheating | Blocked ventilation; operating in high ambient temperature. | Clear all vents; ensure adequate space around the fixture; operate within recommended temperature ranges. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 150W Beam Moving Head Light |
| Light Source | 150W White LED + 44pcs*0.2W RGB Light Strip (SMD) |
| Light Source Lifespan | ≥ 20,000 hours |
| Working Voltage | AC100-240V, 50-60Hz |
| Power Consumption | 200W |
| Color Palette | 7 colors + white light |
| Pattern Plate (Gobo) | 11 patterns + circular patterns |
| Prism | 18 Prism effect, 6+12 Rainbow Stage Effect |
| Focusing | Manual focusing |
| Dimming | Linear dimming, 0-100% brightness adjustable |
| Strobe | 1-20Hz per second, adjustable flash speed |
| Horizontal Position (Pan) | 0-540° (adjustable speed) |
| Vertical Position (Tilt) | 0-200° (adjustable speed) |
| Channel Mode | 13/15 international standard DMX channels |
| Display Screen | Digital display screen, LCD liquid crystal display screen |
| Control Modes | DMX control, Master/Slave synchronous mode, Self-propelled control, Voice control, Remote control, APP control |
| Lamp Color | Black |
| DMX Interface | DMX XLR socket network port |
| IP Level | IP20 for indoor use |
| Product Dimensions | 14.8 x 9.8 x 7 inches (37.6 x 24.9 x 17.8 cm) |
| Item Weight | 13 lbs (5.9 kg) |
| Material | Plastic |
| Color Temperature | 8000 Kelvin |
10. Warranty Information
Tawelun products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact Tawelun customer support. Keep your proof of purchase for any warranty claims.
11. Customer Support
If you encounter any issues or have questions regarding your Tawelun LED 150W Beam Moving Head DJ Light, please contact your retailer or visit the official Tawelun website for support. You may also find additional resources and FAQs on the product page where you made your purchase.
For direct inquiries, please refer to the contact information provided on the product packaging or the manufacturer's official website.