WOLTU EZS32sz-2 Dining Chair Instruction Manual

1. Introduction

Thank you for choosing the WOLTU EZS32sz-2 Dining Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chairs. Please read these instructions carefully before beginning assembly and retain them for future reference.

The WOLTU EZS32sz-2 dining chairs are designed for comfort and versatility, featuring a soft velvet upholstery, an ergonomic backrest, and a robust arc-shaped metal frame. These chairs are sold as a set of two and are suitable for various indoor environments, including dining rooms, kitchens, living rooms, and as accent chairs.

Image 1: WOLTU EZS32sz-2 Dining Chairs in a modern dining room setup.

2. Safety Information

Please observe the following safety guidelines to ensure safe use and prevent damage to the product or injury.

• Read all instructions before assembly and use.
• Keep all packaging materials away from children.
• Do not stand on the chair. Use it only for sitting.
• Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten as necessary.
• The maximum load capacity for each chair is 152 kg (335 lbs). Do not exceed this weight limit.
• Place the chair on a flat, stable surface to prevent tipping.

Image 2: Illustration of the chair's stable metal frame and 152 kg load capacity.

3. Package Contents

Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Chair seat with backrest (2 units)
• Metal frame/legs (2 units)
• Assembly hardware (screws, washers, Allen key)
• Instruction manual

4. Setup (Assembly Instructions)

The upholstered chair comes with illustrated step-by-step instructions and numbered accessories for quick and easy assembly. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs to Seat: Align the metal leg frame with the pre-drilled holes on the underside of the chair seat. Insert the provided screws and washers.
3. Secure Fasteners: Hand-tighten all screws initially. Once all screws are in place, use the included Allen key to fully tighten them. Ensure they are snug but do not overtighten.
4. Adjust Feet: The metal frame is equipped with adjustable feet at the bottom. Adjust these feet to compensate for any unevenness in your floor, ensuring the chair is stable and does not wobble. This also helps protect your floor from scratches.
5. Final Check: Gently shake the chair to confirm stability. If any wobbling occurs, re-check the tightness of all screws and adjust the feet as needed.

Image 3: View of the chair's underside, highlighting the adjustable feet for stability and floor protection.

5. Operating Instructions

The WOLTU EZS32sz-2 dining chair is designed for comfortable and versatile use in various settings.

• Ergonomic Design: The slightly curved backrest provides optimal support for your back, promoting a comfortable sitting posture even during extended periods.
• Versatile Placement: With its simple, modern, and elegant design, the chair adapts well to various interiors. It can be used as a dining chair, kitchen chair, makeup chair, living room accent chair, reading chair, or reception chair.
• Movement: When moving the chair, lift it rather than dragging it to prevent damage to the floor and the chair's feet.

Image 4: Diagram illustrating the ergonomic design of the chair's backrest for optimal support.

6. Maintenance

Proper care will extend the life and appearance of your WOLTU dining chairs.

• Cleaning: For general cleaning, wipe the chair with a soft, damp cloth. For velvet upholstery, use a soft brush or vacuum cleaner with an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Metal Frame Care: The golden metal frame can be cleaned with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the velvet upholstery.

7. Troubleshooting

If you encounter any issues with your WOLTU dining chairs, refer to the following common problems and solutions:

• Chair is Wobbly:
  • Ensure all assembly screws are fully tightened.
  • Adjust the leveling feet on the bottom of the chair legs to compensate for uneven floor surfaces.
• Squeaking Noise:
  • Check and re-tighten all screws. A small amount of lubricant on the screw threads might help if the noise persists.
• Damage to Upholstery:
  • For minor scuffs, gently brush the velvet in the direction of the pile. For significant damage, contact customer support.

If these steps do not resolve the issue, please contact WOLTU customer support for further assistance.

8. Specifications

Below are the technical specifications for the WOLTU EZS32sz-2 Dining Chair:

Image 5: Detailed dimensions of the WOLTU EZS32sz-2 Dining Chair.

9. Warranty and Support

WOLTU products are designed for quality and durability. While specific warranty details are not provided in this manual, products typically come with a return policy. For this product, a 30-day return policy is generally applicable from the date of purchase.

For any questions, technical support, or to report missing/damaged parts, please visit the official WOLTU store or contact their customer service directly.

You can find more information and contact details on the WOLTU Brand Store.