Eliminator Lighting Bubbletron EXL Bubble Machine User Manual

Introduction

This manual provides essential information for the safe and efficient operation of your Eliminator Lighting Bubbletron EXL Bubble Machine. Please read these instructions thoroughly before initial use to ensure proper setup, operation, and maintenance.

Safety Information

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury:

• Ensure the unit is placed on a stable, level surface.
• Do not operate the unit if the power cord is damaged.
• Keep the unit away from water or other liquids.
• Do not block ventilation openings.
• Use only approved bubble fluid.
• Unplug the unit before cleaning or servicing.
• This device is for indoor use or covered outdoor use in dry conditions only.
• Keep out of reach of children.

Package Contents

• Eliminator Bubbletron EXL Bubble Machine
• 9-foot/3M Wired Remote Control (Model: LC-3)
• Power Cord
• User Manual (this document)

Setup

1. Unpacking: Carefully remove the bubble machine from its packaging. Inspect for any damage during transit.
2. Placement: Place the unit on a flat, stable surface. Ensure adequate ventilation around the machine.
3. Fluid Tank: Locate the EZ-Access front fluid tank. Open the tank cover.
4. Fill with Fluid: Pour appropriate bubble fluid into the tank. Do not overfill; observe the MAX fill line.
5. Power Connection: Connect the power cord to the unit's power input and then to a suitable electrical outlet (120V or 230V, depending on model).
6. Remote Control Connection: Plug the wired remote control (LC-3) into the designated remote control input on the rear of the unit.

Image Description: An annotated diagram showing the top and rear views of the Eliminator Bubbletron EXL. Key components are labeled, including the Carrying Handle, EZ-Access Front Fluid Tank, Manual Bubble Switch, Input for Remote Control, Fuse, Power Cord, and Large Dual Fans.

Operating Instructions

1. Power On: Flip the ON/OFF switch located on the rear of the unit to the "ON" position.
2. Activate Bubbles:
   • Wired Remote Control (LC-3): Use the switch on the LC-3 remote control to turn the bubble production ON or OFF.
   • Manual Switch: If not using the remote, the manual bubble switch on the rear of the unit can be used to activate bubble production.
3. Bubble Production: The internal bubble wands will begin to rotate, and the dual high-velocity fans will disperse bubbles into the air.
4. Power Off: When finished, turn the bubble production OFF using the remote or manual switch, then flip the main ON/OFF switch on the rear of the unit to the "OFF" position. Unplug the power cord from the electrical outlet.

Image Description: The Eliminator Bubbletron EXL bubble machine in operation, emitting a large quantity of bubbles against a dark background with blue lighting, demonstrating its output capacity.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your bubble machine.

• Fluid Tank Cleaning: After each use, empty any remaining bubble fluid from the tank. Rinse the tank with distilled water to prevent residue buildup.
• Exterior Cleaning: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Fan Vents: Periodically check the fan vents for dust or debris. Use a soft brush or compressed air to clean them.
• Storage: Store the unit in a cool, dry place when not in use. Ensure the fluid tank is empty and clean before storage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please contact Eliminator Lighting directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Contact Information: Please refer to the official Eliminator Lighting website or product packaging for the most current contact details for customer support.