1. Introduction
Welcome to the user manual for your MOREKA A7 Portable Bluetooth Speaker. This guide provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure optimal performance and longevity of your speaker.

Figure 1.1: Front angle view of the MOREKA A7 Portable Bluetooth Speaker, showcasing its black mesh exterior and orange accents.
2. Safety Instructions
To prevent damage to the speaker or injury to yourself, please observe the following safety precautions:
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Keep the speaker out of reach of children.
- Do not disassemble, modify, or attempt to repair the speaker yourself. This will void the warranty.
- Use only the provided USB charging cable. Using incompatible chargers may damage the device.
- When using the speaker near water, ensure the charging port cover and any other port covers are securely closed to maintain its IPX6 water resistance rating. The speaker is resistant to powerful water jets but is not designed for submersion.
3. Package Contents
Verify that all items are present in the package:
- 1 x MOREKA A7 Portable Bluetooth Speaker
- 1 x USB Type-C Charging Cable
- 1 x User Manual (this document)
4. Product Overview
4.1. Speaker Components
Familiarize yourself with the various parts of your MOREKA A7 speaker.

Figure 4.1: Side view of the MOREKA A7 speaker, showing the vertical MOREKA+ branding and strap attachment points.
- Speaker Grille: Protects the internal speaker drivers.
- Control Panel: Contains buttons for power, volume, playback, and mode selection.
- USB Type-C Charging Port: For charging the speaker's internal battery.
- USB-A Port: For USB flash drive playback.
- TF Card Slot: For MicroSD card playback.
- AUX-in Port: For wired audio connection (3.5mm jack, cable not included).
4.2. Control Buttons
The control panel typically includes the following buttons:
- Power Button (⏻): Press and hold to power on/off.
- Mode Button (M): Press to switch between Bluetooth, TF Card, USB, FM Radio, and AUX modes. Press and hold for TWS pairing.
- Play/Pause Button (⏸): Press to play or pause audio. In call mode, press to answer/end a call. Press and hold to reject a call.
- Volume Down / Previous Track Button (-): Press to decrease volume. Press and hold to go to the previous track.
- Volume Up / Next Track Button (+): Press to increase volume. Press and hold to go to the next track.
5. Setup
5.1. Charging the Speaker
Before first use, fully charge the speaker.
- Locate the USB Type-C charging port on the speaker.
- Connect the provided USB Type-C cable to the speaker's charging port.
- Connect the other end of the USB cable to a compatible USB power adapter (e.g., 5V/2A, not included) or a computer's USB port.
- The charging indicator light will illuminate during charging and turn off or change color when fully charged.
- A full charge typically takes approximately 3-4 hours.
5.2. Powering On/Off
- To Power On: Press and hold the Power button (⏻) for approximately 3 seconds until you hear an audible prompt.
- To Power Off: Press and hold the Power button (⏻) for approximately 3 seconds until you hear an audible prompt.
6. Operating Instructions
6.1. Bluetooth Pairing
Connect your speaker wirelessly to a Bluetooth-enabled device.
- Power on the MOREKA A7 speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light and an audible prompt.
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "MOREKA A7" from the list of found devices.
- Once successfully paired, the speaker will provide an audible confirmation, and the LED light will stop flashing.
- You can now play audio from your device through the MOREKA A7 speaker.
6.2. TF Card Playback
Play music directly from a MicroSD (TF) card.
- Insert a TF card (with supported audio files like MP3, WAV, WMA, FLAC) into the TF card slot on the speaker.
- The speaker will automatically switch to TF card mode and begin playing the audio files. If it does not switch automatically, press the Mode button (M) to select TF card mode.
- Use the Play/Pause, Volume Up/Next Track, and Volume Down/Previous Track buttons to control playback.
6.3. USB Playback
Play music directly from a USB flash drive.
- Insert a USB flash drive (with supported audio files like MP3, WAV, WMA, FLAC) into the USB-A port on the speaker.
- The speaker will automatically switch to USB mode and begin playing the audio files. If it does not switch automatically, press the Mode button (M) to select USB mode.
- Use the Play/Pause, Volume Up/Next Track, and Volume Down/Previous Track buttons to control playback.
6.4. FM Radio
Listen to FM radio stations.
- Press the Mode button (M) repeatedly until you enter FM Radio mode.
- Press the Play/Pause button (⏸) once to initiate an automatic scan for available FM stations. The speaker will save these stations.
- Use the Volume Up/Next Track (+) and Volume Down/Previous Track (-) buttons to navigate between the saved stations.
6.5. AUX Input
Connect external audio devices via a 3.5mm audio cable (not included).
- Connect one end of a 3.5mm audio cable to the AUX-in port on the speaker.
- Connect the other end to the headphone jack or audio output of your external device.
- Press the Mode button (M) repeatedly until you enter AUX mode.
- Control playback and volume from your connected external device.
6.6. TWS (True Wireless Stereo) Function
Pair two MOREKA A7 speakers together for a stereo sound experience.
- Ensure both MOREKA A7 speakers are powered on and are not currently connected to any Bluetooth device.
- On one of the speakers (this will be the primary speaker), press and hold the Mode button (M) for approximately 3 seconds. You will hear an audible prompt indicating TWS pairing mode.
- The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound.
- Now, enable Bluetooth on your mobile device and connect to the primary speaker ("MOREKA A7"). Both speakers will now play audio in synchronized stereo.
7. Maintenance
Proper care ensures the longevity of your speaker.
- Cleaning: Use a soft, dry, lint-free cloth to clean the speaker's exterior. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish or internal components.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To maintain battery health, avoid fully discharging the battery frequently. If storing for a long time, charge the battery to about 50% every few months.
- Water Resistance: Always ensure all port covers are securely sealed when the speaker is exposed to water or moisture to maintain its IPX6 rating.

Figure 7.1: The MOREKA A7 speaker shown amidst a water splash, illustrating its IPX6 water-resistant design.
8. Troubleshooting
If you encounter issues with your speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully using the provided USB cable. |
| No sound from the speaker. | Volume too low; incorrect input mode; device not connected. | Increase volume on both the speaker and the connected device. Press the Mode button to select the correct input (Bluetooth, TF, USB, AUX, FM). Ensure Bluetooth device is paired or AUX cable is connected. |
| Bluetooth connection is unstable or disconnects. | Device too far from speaker; interference; low battery. | Move the connected device closer to the speaker (within 15 meters). Avoid obstacles. Turn off other Bluetooth devices. Recharge the speaker. Try disconnecting and re-pairing the device. |
| Cannot pair two speakers for TWS. | Speakers already connected to another device; incorrect pairing procedure. | Ensure both speakers are not connected to any Bluetooth device. Follow the TWS pairing instructions in Section 6.6 carefully. |
| FM radio reception is poor. | Weak signal; environmental interference. | Move the speaker to a location with better reception. Re-scan for stations. |
9. Specifications
Detailed technical specifications for the MOREKA A7 Portable Bluetooth Speaker.

Figure 9.1: Visual summary of key features and specifications for the MOREKA A7 speaker.
| Model Name: | A7 |
| Brand: | MOREKA |
| Output Power: | 60W (2 x 30W) |
| Speaker Driver: | 78mm Woofer |
| Bluetooth Version: | V5.3+ BR+EDR+BLE |
| Bluetooth Range: | Up to 15 meters (49 feet) |
| Battery Capacity: | 7200mAh |
| Battery Life: | Approximately 5 hours (at 50% volume) |
| Charging Port: | USB Type-C |
| Supported Audio Formats: | WMA, WAV, MP3, FLAC |
| Material: | ABS + Rubber |
| Water Resistance: | IPX6 (Resistant to powerful water jets) |
| Dimensions (L x W x H): | 286mm x 131mm x 121mm (approx. 11.26 x 5.16 x 4.76 inches) |
| Weight: | 1143g (approx. 2.52 lbs) |
| Connectivity: | Bluetooth, TF Card, USB, FM Radio, AUX (Line In) |

Figure 9.2: The MOREKA A7 speaker and its packaging, illustrating the product dimensions.
10. Warranty and Support
Warranty Information: Specific warranty details for the MOREKA A7 speaker are not provided in this manual. Please refer to the retailer where you purchased the product or visit the official MOREKA website for comprehensive warranty terms and conditions.
Customer Support: For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact MOREKA customer service. Contact information can typically be found on the product packaging or the official MOREKA website.