1. Introduction
Thank you for choosing the KDG Simple Cordless Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read it thoroughly before operation and retain it for future reference.
2. Safety Information
To ensure safe operation, please observe the following precautions:
- This product is designed for indoor use only.
- Do not expose the lamp to water or excessive moisture.
- Avoid disassembling or modifying the lamp, as this may void the warranty and pose a safety risk.
- Use only the provided USB Type-C cable for charging.
- Keep the lamp away from heat sources and direct sunlight.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
3. Package Contents
Verify that all items are present in your package:
- KDG Simple Cordless Table Lamp (2 units)
- Linen Fabric Lampshade (2 units)
- USB Type-C Charging Cable (2 units)
- User Manual
Figure 3.1: KDG Simple Cordless Table Lamps (2-pack)
4. Setup
Follow these steps to set up your KDG Simple Cordless Table Lamp:
- Carefully remove all components from the packaging.
- Place the lampshade onto the lamp base, ensuring it sits securely.
- The LED bulb is integrated and does not require separate installation.
Figure 4.1: Assembled KDG Simple Cordless Table Lamp in a bedroom setting.
Video 4.1: Overview of the KDG Simple Cordless Table Lamp, demonstrating its design and portability.
5. Operating Instructions
5.1 Charging the Lamp
The lamp features a built-in 5000mAh rechargeable battery. Use the provided USB Type-C cable to charge the lamp. The charging time is approximately 4-5 hours. A full charge can provide 8-40 hours of illumination, depending on the selected brightness level.
- Connect the USB Type-C cable to the charging port on the lamp base and to a compatible USB power source.
- The indicator light on the base will show charging status (e.g., red for charging, green for fully charged).
- If the lamp is not used for an extended period, the battery may enter a dormant state. Multiple charges may be required to reactivate it.
- Optimal battery performance is achieved at room temperature. Low temperatures can affect battery capacity and lifespan.
Figure 5.1: USB Type-C charging port and charging indicators.
5.2 Power On/Off and Brightness Adjustment
The lamp is controlled by a touch switch located on the base.
- To turn on/off: Lightly touch the switch on the lamp base.
- To adjust brightness: With the lamp on, repeatedly touch the switch to cycle through the three brightness levels: 30%, 70%, and 100%. The lamp provides 2700K warm light.
Figure 5.2: Three dimming levels: 30%, 70%, 100% brightness.
Video 5.1: Demonstration of the KDG Simple Portable Bedside Lamp's touch control and brightness adjustment.
6. Maintenance
Proper care will extend the life of your lamp:
- Cleaning: Wipe the lamp base with a soft, dry cloth. For the lampshade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place. Ensure the battery is partially charged before storage to maintain its health.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp using the provided USB Type-C cable. |
| Lamp turns on but light is dim. | Low battery charge. | Charge the lamp fully. |
| Brightness levels are not changing. | Incorrect touch operation. | Ensure you are lightly touching the switch to cycle through brightness levels. |
| Battery life is shorter than expected. | Operating in low temperatures or prolonged use at highest brightness. | Use at room temperature. Reduce brightness for longer battery life. |
8. Specifications
Key technical details of the KDG Simple Cordless Table Lamp:
- Model Name: AMZ-TBL-025-2-BY
- Brand: KDG
- Dimensions: 5"D x 5"W x 14.6"H
- Item Weight: 1.1 Pounds
- Material: Fabric, Metal
- Power Source: Battery Powered
- Battery: 5000mAh Lithium Polymer (included)
- Charging Port: USB Type-C
- Light Source Type: LED
- Brightness: 160 Lumens (Max)
- Color Temperature: 2700 Kelvin (Warm Light)
- Brightness Levels: 3 (30%, 70%, 100%)
- Control Method: Touch
- Voltage: 5 Volts (DC)
- Wattage: 3 watts
- Indoor/Outdoor Usage: Indoor
- UPC: 784633203266
Figure 8.1: Product dimensions and key features.
9. Warranty and Support
For any product-related inquiries, issues, or warranty claims, please contact KDG Lighting directly through your purchase platform or the contact information provided with your product. We are committed to resolving any problems you may encounter.