ALPHA BIDET iX-Pure-EW

ALPHA BIDET iX Pure Elongated Bidet Toilet Seat User Manual

Model: iX-Pure-EW

Brand: ALPHA BIDET

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ALPHA BIDET iX Pure Elongated Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The iX Pure bidet seat offers a modern, ultra-low profile design with features such as endless warm water, an arced stainless steel nozzle, and a blue LED nightlight, designed for effective cleansing and user comfort.

ALPHA BIDET iX Pure Elongated Bidet Toilet Seat with remote control — Image: The ALPHA BIDET iX Pure Elongated Bidet Toilet Seat in white, shown with its accompanying remote control.

Package Contents

Verify that all components are present before beginning installation:

ALPHA BIDET iX Pure Elongated Bidet Toilet Seat
Remote control with wall mount
7/8" T-valve
Supply hose
Mounting kit with top mounting bolts

Included components for Alpha Bidet iX Pure — Image: All components included in the ALPHA BIDET iX Pure package, laid out on a dark surface. These include the bidet seat, remote control, T-valve, supply hose, and mounting hardware.

Setup and Installation

Before installation, ensure your toilet meets the required dimensions for the elongated model. A standard electrical outlet (120V AC) must be available near the toilet.

Toilet Compatibility

The ALPHA BIDET iX Pure Elongated model is designed for elongated toilets. Refer to the diagram below for specific measurements.

Toilet dimensions diagram for bidet seat installation — Image: Diagram illustrating required toilet dimensions for proper bidet seat fit. Key measurements for elongated seats are provided.

Installation Steps

Prepare the Toilet: Turn off the water supply to the toilet and flush to empty the tank. Remove your existing toilet seat.
Install T-Valve: Disconnect the toilet's water supply hose from the fill valve. Install the provided 7/8" T-valve between the fill valve and the water supply hose.
Connect Bidet Hose: Connect one end of the bidet supply hose to the T-valve and the other end to the water inlet on the bidet seat.
Mount the Bidet Seat: Place the mounting plate onto the toilet bowl holes. Secure it with the top mounting bolts. Slide the bidet seat onto the mounting plate until it clicks into place.
Connect Power: Plug the bidet seat into a grounded electrical outlet.
Restore Water Supply: Slowly turn on the water supply to the toilet and check for leaks.

Bidet mounting plate — Image: Close-up view of the bidet seat's mounting plate, showing the adjustable brackets for securing it to the toilet bowl.

Note: It is recommended to use an inline water filter to prevent mineral buildup and extend the life of the unit, especially in areas with hard water.

Operating Instructions

The ALPHA BIDET iX Pure is operated using the included remote control. Ensure the remote has batteries installed (batteries not included).

Remote Control Functions

Alpha Bidet iX Pure remote control — Image: The sleek, white remote control for the ALPHA BIDET iX Pure, featuring clearly labeled buttons for various functions.

Rear Wash: Activates the rear cleansing function.
Front Wash (Feminine Wash): Activates the front cleansing function.
Dryer: Activates the warm air dryer.
Stop: Stops any active function.
Water Pressure Adjustment: Increases or decreases water spray intensity.
Nozzle Position Adjustment: Moves the nozzle forward or backward.
Water Temperature: Adjusts the water temperature (warm, ambient).
Seat Temperature: Adjusts the heated seat temperature.
Nightlight: Toggles the blue LED nightlight on or off.

Key Features in Use

Bidet nozzle spraying water — Image: A close-up view of the bidet's stainless steel nozzle extending and spraying a stream of water, demonstrating the cleansing function.

Bidet warm air dryer — Image: A close-up of the bidet seat's warm air dryer vent, showing warm air being emitted for drying after washing.

Bidet with blue LED nightlight — Image: The ALPHA BIDET iX Pure seat installed on a toilet, with its integrated blue LED nightlight illuminated, providing soft illumination in a dark bathroom.

Maintenance

Cleaning the Bidet Seat

Regular cleaning helps maintain hygiene and extends the product's lifespan. Use a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads.

Unplug the unit before cleaning.
Wipe down the exterior surfaces with a damp cloth.
For the nozzle, activate the self-cleaning function (if available) or gently clean with a soft brush.
Ensure all surfaces are dry before plugging the unit back in.

Water Filter Replacement

If an inline water filter is used, replace it according to the manufacturer's recommendations, typically every 6 months to 1 year, to ensure optimal performance and prevent clogging.

Troubleshooting

Problem	Possible Cause	Solution
No water spray	Water supply off, unit unplugged, clogged nozzle.	Check water supply valve, ensure unit is plugged in, clean nozzle.
Water leaks	Loose connections, damaged seals.	Tighten all connections, inspect seals for damage and replace if necessary.
No warm water	Heater setting off, power issue.	Check water temperature settings on remote, ensure unit has power.
Seat wiggles	Mounting bolts loose.	Tighten mounting bolts securely.

If you encounter issues not listed here or require further assistance, please contact ALPHA BIDET customer support.

Specifications

Feature	Detail
Brand	ALPHA BIDET
Model	iX-Pure-EW
Color	White
Size	Elongated
Product Dimensions	20.4"L x 15"W
Item Weight	14 Pounds
Style	iX Pure
Shape	Oval
UPC	674276642662
Power Source	Requires electrical outlet (Batteries for remote only)
Included Components	7/8" T-valve, Mounting kit with top mounting bolts, Remote control with wall mount, Supply hose

Image: Shields displaying UPC and IAPMO certifications, indicating compliance with industry standards.

Warranty and Support

For warranty information and customer support, please refer to the official ALPHA BIDET website or contact their customer service department directly. Keep your purchase receipt for warranty claims.

Manufacturer: ALPHA BIDET

Website: www.alphabidet.com