1. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or voiding of the warranty.
- Always turn off the main water supply before beginning any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- Ensure all connections are secure to prevent leaks. Do not overtighten.
- If you are unsure about any step, consult a qualified plumber.
2. Package Contents
Verify that all components are present before starting installation:
- Vessel Faucet Body
- 2 Pcs Supply Lines (24 Inches)
- Pop Up Drain
- Installation Hardware (Nuts, Gaskets)
Figure 2.1: Included Components
3. Specifications
| Feature | Detail |
|---|---|
| Brand | RUITHOE |
| Model Name | Vessel Faucet |
| Model Number | R-SLT-001H-ORB |
| Color | Oil Rubbed Bronze |
| Material | Brass |
| Mounting Type | Deck Mount |
| Number of Handles | 1 (Single Handle) |
| Hole Count | 1 |
| Spout Design | Waterfall, Straight |
| Maximum Flow Rate | 1.7 Gallons Per Minute |
| Spout Height | 4.92 Inches |
| Spout Reach | 5.51 Inches |
| Product Dimensions | 4.92"D x 1.8"W x 10.63"H |
| Hose Length | 24 Inches |
| Special Features | Pop Up Drain, Water Saving System |
Figure 3.1: Product Dimensions and Hole Requirements
4. Installation Instructions
Follow these steps for proper installation of your RUITHOE vessel sink faucet. A video guide is also provided for visual assistance.
Video 4.1: How to Install a Waterfall Faucet. This video demonstrates the step-by-step installation process for the RUITHOE waterfall vessel sink faucet.
Step-by-Step Guide:
- Prepare the Faucet Body:
Insert the hot and cold supply lines through the bottom of the faucet body. Ensure the rubber gasket is correctly positioned at the base of the faucet.
Figure 4.2: Inserting Supply Lines
- Secure the Mounting Nut:
Slide the brass mounting nut onto the threaded shaft of the faucet, over the supply lines, and hand-tighten it against the faucet body. This secures the supply lines within the faucet.
Figure 4.3: Securing Mounting Nut
- Position the Faucet:
Place the faucet through the single hole on your countertop or vessel sink. Ensure the faucet is centered and facing the desired direction.
Figure 4.4: Positioning the Faucet
- Install Mounting Hardware:
From underneath the countertop, slide the rubber gasket and then the brass washer onto the threaded shaft. Hand-tighten the large brass nut to secure the faucet. Use a wrench to gently tighten for a firm hold, but do not overtighten.
Figure 4.5: Installing Mounting Hardware
- Connect Water Supply Lines:
Connect the hot and cold supply lines to the corresponding hot (red) and cold (blue) water shut-off valves. Use a wrench to tighten the connections. Ensure the hot water line is connected to the hot valve and the cold water line to the cold valve.
Figure 4.6: Connecting Water Supply Lines
- Install Pop-Up Drain:
Follow the separate instructions provided with the pop-up drain for its installation into the sink basin. Ensure a watertight seal.
- Test for Leaks:
Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections as necessary.
5. Operation
Your RUITHOE vessel sink faucet features a single lever handle for easy control of water flow and temperature.
- Water Flow: Lift the handle upwards to increase water flow. Push it downwards to decrease or turn off the water.
- Temperature Control: Move the handle to the left for hot water and to the right for cold water. The handle can be positioned anywhere between hot and cold to achieve the desired water temperature.
Figure 5.1: Single Handle Operation
Figure 5.2: Waterfall Spout in Operation
6. Maintenance and Care
To maintain the appearance and functionality of your Oil Rubbed Bronze faucet, follow these care guidelines:
- Cleaning: Clean the faucet regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish. Mild soap and water are recommended.
- Finish Protection: The faucet features a plating layer designed to prevent fingerprints and resist tarnishing. Gently wipe the surface to remove any smudges.
- Avoid Scratches: Do not use scouring pads, steel wool, or other abrasive materials on the faucet surface.
- Water Spots: To prevent water spots, wipe the faucet dry after each use, especially in areas with hard water.
Figure 6.1: Fingerprint Resistant Finish
7. Troubleshooting
If you encounter any issues with your faucet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Partially closed shut-off valves; clogged aerator; debris in supply lines. | Ensure shut-off valves are fully open. Clean or replace the aerator. Flush supply lines. |
| Leaks at Faucet Base | Loose mounting nut; improperly seated gasket. | Tighten the mounting nut from underneath the sink. Check and reseat the rubber gasket. |
| Leaks from Handle | Worn cartridge. | Contact customer support for a replacement cartridge. |
| Water Temperature Issues | Incorrect hot/cold supply line connection; issues with water heater. | Verify hot and cold lines are connected correctly. Check water heater settings. |
8. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact RUITHOE customer service directly. Keep your proof of purchase for warranty claims.
If you require further assistance or have questions not covered in this manual, please visit the official RUITHOE website or contact their customer support team.
Note: Product specifications are subject to change without notice.