SKMEI Model 2098 Multifunctional Digital Wrist Watch User Manual

Introduction

Thank you for choosing the SKMEI Model 2098 Multifunctional Digital Wrist Watch. This watch combines analog and digital displays with a range of features including a thermometer, stopwatch, countdown timer, alarm, and LED backlight. Designed for durability and comfort, this manual provides detailed instructions to help you set up and operate your watch effectively.

Front view of the SKMEI Model 2098 watch, showcasing its dual display and robust design.

Key Features

• Dual Display: Features both analog and digital time displays.
• 50M Water Resistance: Suitable for swimming and water sports, but not for diving.
• Integrated Thermometer: Provides temperature readings.
• Multiple Functions: Includes stopwatch, countdown timer, alarm, and 12/24-hour clock.
• LED Backlight: Ensures visibility in low-light conditions.
• Durable Construction: Scratch-resistant resin crystal, ABS and zinc alloy case, silica gel band, and stainless steel buckle.

An overview of the watch's primary features, including its display type, functions, and materials.

Setup

Initial Power On

Your watch may arrive with a plastic stopper in the crown to preserve battery life. Remove this stopper and push the crown in to activate the watch. The digital display should light up, and the analog hands will begin to move.

Setting Analog Time

1. Pull out the crown (the knob on the right side of the watch case) to the first or second click position.
2. Rotate the crown to adjust the hour and minute hands to the desired time.
3. Push the crown back in to its original position to start the analog timekeeping.

Operating Instructions

The SKMEI Model 2098 features four buttons: LIGHT (top-left), MODE (bottom-left), START/STOP (top-right), and RESET/ADJUST (bottom-right).

Basic Mode Navigation

Press the MODE button repeatedly to cycle through the different functions: Time Display → Stopwatch → Alarm → Countdown Timer → Dual Time → Time Display.

Setting Digital Time and Date

1. From the Time Display mode, press and hold the RESET/ADJUST button until the seconds begin to flash. This indicates setting mode.
2. Press the MODE button to cycle through the settings: Seconds → Hours → Minutes → Year → Month → Day → 12/24-hour format.
3. Use the START/STOP button to increase the flashing value.
4. Once all settings are adjusted, press the RESET/ADJUST button again to exit setting mode.

Using the Alarm

1. Press the MODE button until you reach the Alarm mode (indicated by 'AL' or a bell icon).
2. Press and hold the RESET/ADJUST button until the alarm hours flash.
3. Use the START/STOP button to set the desired hour.
4. Press the MODE button to select minutes, then use START/STOP to set the minutes.
5. Press RESET/ADJUST to confirm and exit.
6. In Alarm mode, press START/STOP to toggle the alarm ON/OFF.

Using the Stopwatch

1. Press the MODE button until you reach the Stopwatch mode (indicated by 'ST' or 'CH').
2. Press START/STOP to start the stopwatch.
3. Press START/STOP again to pause.
4. Press RESET/ADJUST to reset the stopwatch to zero while paused.

Using the Countdown Timer

1. Press the MODE button until you reach the Countdown Timer mode (indicated by 'TR').
2. Press and hold the RESET/ADJUST button until the hours flash.
3. Use START/STOP to set the desired hours, then MODE to move to minutes and seconds, setting each with START/STOP.
4. Press RESET/ADJUST to confirm.
5. Press START/STOP to start or pause the countdown.
6. When the timer reaches zero, an alarm will sound. Press any button to stop the alarm.

Thermometer Function

The watch features a built-in thermometer. The temperature is displayed on the digital screen, typically below the time. Ensure the watch has been on your wrist for at least 15-20 minutes for an accurate body temperature reading, or off the wrist for ambient temperature.

LED Backlight

Press the LIGHT button (top-left) to illuminate the digital display for a few seconds, enhancing visibility in dark environments.

Detailed view of the watch face, highlighting the digital display and analog hands.

The watch on a wrist, illustrating its size and how it looks during wear.

Maintenance

Water Resistance

The SKMEI Model 2098 is rated for 50M (5 ATM) water resistance. This means it is suitable for showering, swimming in shallow water, and general water exposure. It is not suitable for diving, snorkeling, or high-pressure water activities. Do not operate buttons while the watch is submerged in water.

The watch demonstrating its water resistance capabilities.

Cleaning Your Watch

To clean your watch, wipe it with a soft, damp cloth. For the silica gel band, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch case or crystal.

Battery Replacement

The watch uses a standard watch battery. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

The stainless steel case back of the watch, indicating its water resistance and model information.

Troubleshooting

• Digital Display is Blank: Check if the battery needs replacement. Ensure the crown is fully pushed in.
• Buttons Not Responding: Ensure the watch is not in a locked mode (if applicable, though not a feature of this model). Try resetting the watch by removing and reinserting the battery (professional service recommended).
• Incorrect Time/Date: Follow the 'Setting Digital Time and Date' and 'Setting Analog Time' instructions carefully.
• Thermometer Inaccuracy: For accurate body temperature, wear the watch for at least 15-20 minutes. For ambient temperature, remove the watch from your wrist for a similar duration.
• Water Inside Watch: If condensation or water appears inside the watch, stop using it immediately and seek professional repair to prevent further damage.

Specifications

Dimensional diagram of the watch, illustrating key measurements.

Warranty and Support

This SKMEI watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support or service inquiries, please contact your retailer or the official SKMEI customer service channels.

Additional protection plans may be available from your retailer, such as the 1 Year Extended Warranty Plan by Onsitego mentioned during purchase.