Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Generic Interior Sunvisor Set designed specifically for the Hyundai i30 models manufactured between 2007 and 2011. Please read this manual thoroughly before installation to ensure proper fit and function.
The set includes two sunvisors, one for the left (driver's) side and one for the right (passenger's) side, in a silver finish. These sunvisors are direct replacements for the original equipment.
Product Overview
Figure 1: Overview of the Hyundai i30 model compatible with the sunvisor set, alongside the two silver sunvisors included in the package. The image shows the vehicle for context and the product itself.
Figure 2: Close-up view of the two interior sunvisors. Note the mounting points and mirror cutouts, indicating their design for specific vehicle integration.
The Generic Interior Sunvisor Set is designed to replace the existing sunvisors in your Hyundai i30 (2007-2011). Each sunvisor is constructed from durable plastic material and features the necessary mounting hardware points for a secure fit. The set includes both the driver's side and passenger's side sunvisors.
Setup and Installation
Tools Required:
- Phillips head screwdriver
- Flathead screwdriver (optional, for prying)
- Trim removal tool (recommended to prevent damage)
Installation Steps:
- Safety First: Ensure the vehicle is parked on a level surface and the engine is off.
- Remove Old Sunvisor:
- Locate the mounting screws holding the existing sunvisor in place. These are typically covered by small plastic caps.
- Carefully pry off the plastic caps using a flathead screwdriver or trim removal tool.
- Unscrew the mounting screws.
- Gently detach the sunvisor from its mounting bracket. If there are any electrical connections (e.g., for vanity light), carefully disconnect them.
- Install New Sunvisor:
- Align the new sunvisor with the mounting holes in the vehicle's headliner.
- If applicable, reconnect any electrical connections.
- Insert and tighten the mounting screws. Do not overtighten.
- Replace the plastic caps over the screw heads.
- Test the sunvisor's movement to ensure it pivots smoothly and stays in position.
- Repeat the process for the other side.
It is recommended to consult your vehicle's service manual for specific instructions regarding interior trim removal if you are unsure.
Operating Instructions
The sunvisors operate in the same manner as the original equipment. They are designed to block direct sunlight and improve visibility while driving.
- To Block Front Sun: Pull the sunvisor down towards the windshield.
- To Block Side Sun: Detach the sunvisor from its clip on the side nearest the rearview mirror, then pivot it towards the side window.
- Vanity Mirror: If your sunvisor includes a vanity mirror, slide open the cover to access it.
Maintenance
These sunvisors require minimal maintenance.
- Cleaning: Wipe the sunvisor surfaces with a soft, damp cloth. For stubborn marks, a mild automotive interior cleaner can be used. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check the mounting screws to ensure they are secure.
Troubleshooting
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sunvisor is loose or wobbly. | Mounting screws are loose. | Tighten the mounting screws. Do not overtighten. |
| Sunvisor does not stay in position. | Mounting bracket or pivot mechanism worn. | Ensure proper installation. If the issue persists, the pivot mechanism might be worn. Contact seller for assistance. |
| Vanity light not working (if applicable). | Disconnected electrical wire or faulty bulb/LED. | Check electrical connection during installation. If still not working, the light component may be faulty. |
Specifications
- Product Name: Interior Sunvisor Set
- Brand: Generic
- Model Compatibility: Hyundai i30 (2007-2011)
- Part Quantity: 2 Pieces (Left and Right)
- Color: Silver
- Material: Plastic
- Item Weight: Approximately 4.4 pounds (total for set)
- Manufacturer: ORANGE ACCESSORIES
- Country of Origin: Turkey
Warranty Information
Specific warranty details are not provided in the product description. For information regarding warranty coverage, please contact the seller directly through the Amazon messaging system or refer to your purchase documentation.
Customer Support
For any questions, concerns, or assistance with your Generic Interior Sunvisor Set, please contact the seller, EUROPEAUTOPARTS, via the Amazon messaging system. They are committed to providing excellent customer service.
Seller Name: EUROPEAUTOPARTS
Contact Method: Amazon Messaging System
