Sunbeam 32810039

Sunbeam Electric Heated Mattress Pad Instruction Manual

Model: 32810039

Product Overview

The Sunbeam Restful Electric Heated Mattress Pad provides soothing warmth for a comfortable night's sleep. This King size pad (80" x 76") features a soft fabric top and a deep pocket skirt designed to fit mattresses up to 16" deep. It offers 12 heat settings, a 12-hour auto shut-off, and built-in overheat protection for safety. The pad is machine washable and dryer safe for easy care.

Sunbeam Electric Heated Mattress Pad on a bed with two controllers

Image: The Sunbeam Electric Heated Mattress Pad shown on a King size bed, featuring two digital controllers for dual-zone heating. The pad is white and fits snugly over the mattress.

Safety Information

Important Safety Precautions:

  • Always place the heated mattress pad on a flat, dry surface.
  • Do not use the pad if it is wet or damaged.
  • Keep children and pets away from the pad while it is in use.
  • Do not use with infants, persons insensitive to heat, or persons who cannot remove the pad themselves.
  • Do not use with a waterbed.
  • Do not use with pull-out couches or beds that fold.
  • Do not use pins or other metallic objects with this pad.
  • Do not dry clean this product. Dry cleaning solvents may damage the insulation of the heating element.
  • Do not tuck in or pinch the supply cord.
  • Ensure the controller is not covered by other bedding when in use.
Sunbeam Advantage diagram showing ETL certification, safe and reliable, overheat protection, and double insulated wire protection

Image: Diagram illustrating the Sunbeam Advantage, highlighting key safety features such as ETL certification, safe and reliable operation, overheat protection, and double insulated wire protection for enhanced user safety.

Setup Instructions

  1. Unpack the Mattress Pad: Carefully remove the mattress pad and controllers from the packaging. Ensure all components are present.
  2. Position the Pad: Lay the heated mattress pad directly on your mattress. Ensure the connection point for the controller(s) is at the foot of the bed to avoid discomfort.
  3. Secure the Pad: The deep pocket skirt stretches to fit mattresses up to 16 inches deep. Pull the skirt over the corners of your mattress to ensure a secure, snug fit.
  4. Connect the Controller(s): Firmly plug the controller cord(s) into the connector(s) on the mattress pad. For King size pads, there are two controllers, one for each side of the bed.
  5. Plug into Power: Plug the power cord(s) from the controller(s) into a 120V AC electrical outlet. Ensure the cord is not pinched or tucked under the mattress or other objects.
  6. Cover with Bedding: Place your fitted sheet and other bedding over the heated mattress pad.
Sunbeam Electric Heated Mattress Pad fitted on a mattress, showing the deep pocket skirt

Image: The Sunbeam Electric Heated Mattress Pad securely fitted onto a mattress, demonstrating its deep pocket skirt that accommodates mattresses up to 16 inches in depth.

Operating Instructions

The Sunbeam Electric Heated Mattress Pad features an easy-to-use digital controller for personalized comfort.

  1. Power On/Off: Press the Power button (circle with vertical line) to turn the pad on or off. The LED display will illuminate.
  2. Select Heat Setting: Use the "+" and "-" buttons to adjust the heat level. There are 12 heat settings available, allowing you to customize your warmth. The controller remembers your last heat setting for convenience.
  3. Set Auto Shut-Off: Press the Timer button (clock icon) to cycle through the selectable auto shut-off times, from 1 to 12 hours. This feature provides added peace of mind.
  4. Preheating: For optimal warmth, turn on the pad to a higher setting (e.g., 8-12) approximately 15-30 minutes before getting into bed. Once you are in bed, you can lower the setting to your desired comfort level.
  5. LED Display: The LED display dims automatically after 10 seconds to minimize light disturbance during the night.
Close-up of the Sunbeam digital controller for the heated mattress pad

Image: A detailed view of the Sunbeam digital controller, showing the LED display for heat settings, buttons for adjusting temperature, and the power and timer functions. It also highlights features like 12 heat settings, 12-hour auto shut-off, and memory function.

For King and Queen sizes, the dual controllers allow each user to set their preferred heat level independently, providing individualized comfort.

Couple enjoying individualized comfort with a dual-zone heated mattress pad

Image: A couple relaxing in bed, illustrating the individualized comfort provided by the dual-zone heating feature of the mattress pad, where each side can be set to a different temperature.

Maintenance and Care

Proper care ensures the longevity and performance of your Sunbeam Electric Heated Mattress Pad.

  1. Disconnect Controller: Before washing, always detach the controller(s) from the mattress pad. Ensure the power cord is unplugged from the wall outlet.
  2. Machine Wash: The mattress pad is machine washable. Use a gentle cycle with cold water. Do not bleach.
  3. Rinse Thoroughly: Ensure the pad is thoroughly rinsed to remove all detergent residue.
  4. Machine Dry: The pad is dryer safe. Tumble dry on a low heat setting. Do not iron.
  5. Air Dry: Alternatively, you can hang dry the mattress pad. Ensure it is completely dry before reconnecting the controller(s) and using it again.
  6. Storage: When not in use, store the mattress pad neatly folded in a cool, dry place. Do not place heavy objects on top of the pad during storage, as this may damage the internal wiring.
Sunbeam Electric Heated Mattress Pad being washed in a washing machine, highlighting easy care

Image: The Sunbeam Electric Heated Mattress Pad shown next to washing machines, emphasizing its easy care instructions, including being washer and dryer safe after detaching the controller.

Troubleshooting

ProblemPossible CauseSolution
Pad does not heat or display is off.
  • Not plugged in correctly.
  • Controller not firmly connected to pad.
  • Power outage or circuit breaker tripped.
  • Ensure power cord is securely plugged into a working outlet.
  • Firmly push the controller cord into the pad's connector until it clicks.
  • Check your home's circuit breaker.
Pad is not warm enough.
  • Heat setting is too low.
  • Pad not preheated.
  • External factors (cold room, thin bedding).
  • Increase the heat setting using the "+" button.
  • Turn on the pad 15-30 minutes before use to preheat the bed.
  • Ensure adequate bedding is used to trap heat.
Controller display shows an error code.Internal malfunction or safety shut-off.Unplug the pad from the wall outlet for 5 minutes, then plug it back in. If the error persists, contact customer support.
Pad feels unevenly heated.Pad may be bunched or folded.Ensure the pad is spread flat and smooth on the mattress. Avoid tucking or folding the pad.

Specifications

  • Brand: Sunbeam
  • Model Name: Heated Mattress Pad
  • Model Number: 32810039
  • Size: King (80" x 76")
  • Fabric Type: 100% Polyester (Non-woven)
  • Color: White
  • Heat Settings: 12
  • Auto Shut-Off: 12-hour selectable
  • Mattress Fit: Deep pocket skirt fits mattresses up to 16" deep
  • Care Instructions: Machine Washable, Dryer Safe
  • Item Weight: Approximately 5.08 pounds
  • UPC: 694501139279, 694501131914
Diagram showing various mattress pad sizes: Twin, Full, Queen, and King with dimensions

Image: A visual guide to available mattress pad sizes, including Twin (75"x39"), Full (75"x54"), Queen (80"x60"), and King (80"x76"), illustrating their respective dimensions and controller configurations.

Warranty and Support

The Sunbeam Electric Heated Mattress Pad is backed by a 5-year limited warranty. This warranty covers defects in material and workmanship under normal household use.

For warranty claims, technical support, or any questions regarding your product, please contact Sunbeam Customer Service. Refer to the product packaging or the official Sunbeam website for the most current contact information.

Manufacturer: Star Elite Inc.

Sunbeam Heated Bedding product box showing digital controller features, 12 heat settings, 12-hour auto-off, remembers last setting, machine washable, and a 5-year limited warranty

Image: The product packaging for Sunbeam Heated Bedding, highlighting key features such as the digital controller, 12 heat settings, 12-hour auto-off, memory function, machine washability, and the 5-year limited warranty.

Additional Information

This product is ETL certified, ensuring it meets recognized safety standards. It features premium heated wires that sense and adjust for consistent, even warmth throughout the night.

Close-up of the non-woven polyester top fabric of the Sunbeam heated mattress pad, with a hand touching it

Image: A close-up view of the non-woven polyester top fabric of the heated mattress pad, emphasizing its soft, noiseless texture, and highlighting Sunbeam's over 125 years of trusted experience.

Overhead view of a heated mattress pad showing even heat distribution, energy efficiency, and overheat protection icons

Image: An overhead illustration of the heated mattress pad, visually representing its even heat distribution, energy efficiency, and built-in overheat protection features.

Related Documents - 32810039

Preview Sunbeam Heated Bedding Operation and Care Manual
Comprehensive guide for Sunbeam Heated Bedding, covering safety instructions, setup, operation, controller use, care and cleaning, warranty information, and FCC compliance for model IMGY22-ES.
Preview Sunbeam Connected Heated Bedding User Manual
Comprehensive user manual for Sunbeam Connected Heated Bedding, covering setup, operation via wired controller and mobile app, voice assistant integration, care instructions, troubleshooting, and warranty information.
Preview Sunbeam Heated Bedding User Manual: Setup, Features, Care, and Warranty
Comprehensive user manual for Sunbeam heated bedding products, including setup instructions for blankets, mattress pads, and throws, control features, care and cleaning guidelines, troubleshooting FAQs, and limited warranty information.
Preview Sunbeam Heated Bedding User Manual: Safety, Setup, Care, and Warranty
Official user manual for Sunbeam heated bedding products, including blankets, mattress pads, and throws. Features important safety warnings, quick setup guides, control explanations, care and cleaning instructions, FAQs, and warranty information. Visit www.sunbeambedding.com for support.
Preview Sunbeam Heated Bedding User Manual: Comfort and Safety Guide
This user manual provides comprehensive guidance for Sunbeam heated bedding products, including setup, safety, care, and control features for heated blankets, mattress pads, and throws. Learn how to maximize comfort and ensure safe operation with Sunbeam.
Preview Sunbeam Heated Products User Manual
User manual for Sunbeam heated blankets, mattress pads, and throws, including setup, control features, care and cleaning, troubleshooting, and warranty information.