1. Product Overview
The QXMH Solar Outdoor Flash Alarm Strobe Light is designed to enhance security for various outdoor environments such as homes, yards, chicken coops, farms, and barns. It features solar charging, a loud 129dB alarm, and a flashing strobe light to deter intruders.
Image 1.1: The QXMH Solar Outdoor Flash Alarm Strobe Light installed in an outdoor environment, deterring wildlife.
2. Package Contents
Upon opening the package, ensure all the following items are present:
- 1 x QXMH Solar Outdoor Flash Alarm Strobe Light
- 1 x User Manual
- 1 x Installation Kit (screws and wall plugs)
Image 2.1: Contents of the product package, showing the alarm unit, user manual, and installation hardware.
3. Setup and Installation
3.1 Initial Charging
Before first use, place the solar alarm in direct sunlight for 6-8 hours to ensure the internal battery is sufficiently charged. The device is solar-powered and designed for continuous operation with adequate sunlight.
3.2 Mounting the Device
- Choose a location that receives ample direct sunlight throughout the day for optimal solar charging.
- Ensure the chosen location provides a clear line of sight for the alarm's intended coverage area.
- Use the provided screws and wall plugs to securely mount the alarm to a wall, fence post, or other stable surface.
Image 3.1: The solar alarm mounted on a wooden fence post, demonstrating typical installation.
4. Operating Instructions
4.1 Power On/Off and Mode Selection
The device features a power/mode switch located on the underside of the unit. Press this button to cycle through the available operating modes and to power the device off.
Image 4.1: Location of the power/mode switch on the underside of the alarm unit.
4.2 Working Modes
The alarm offers four distinct working modes. Press the switch button repeatedly to cycle through these modes:
- Mode 1 (1st Press): 24-hour cycle sound and light alarm with a 10-minute interval.
- Mode 2 (2nd Press): 24-hour cycle sound and light alarm with a 20-minute interval.
- Mode 3 (3rd Press): 12-hour night time cycle sound and light alarm every 10 minutes.
- Mode 4 (4th Press): 12-hour night time cycle sound and light alarm every 20 minutes.
- Shutdown (5th Press): Powers off the device.
Image 4.2: Visual representation of the four distinct operating modes.
Image 4.3: The alarm in operation, illustrating the effect of the sound and light alarm.
5. Maintenance
To ensure optimal performance and longevity of your QXMH Solar Outdoor Flash Alarm, follow these maintenance guidelines:
- Solar Panel Cleaning: Regularly clean the solar panel surface with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures efficient solar charging.
- Waterproof Design: The alarm is designed with IP55 waterproofing, making it resistant to rain and wet conditions. However, avoid submerging the device in water.
- Battery: The device uses a 3.7V 400mAh lithium battery. No user-replaceable batteries are included or required for normal operation.
Image 5.1: The solar alarm functioning effectively during rainfall, demonstrating its waterproof capability.
6. Troubleshooting
If you encounter issues with your solar alarm, refer to the following common troubleshooting steps:
- Alarm Not Activating:
- Ensure the device is powered on and set to the desired working mode.
- Verify the solar panel is clean and receiving sufficient direct sunlight for charging.
- Check if the ambient light conditions match the selected mode (e.g., night mode requires darkness).
- Alarm Volume Low or Inconsistent:
- Ensure the speaker grille is not obstructed by dirt or debris.
- Allow the device to charge fully in direct sunlight for a day. Low battery can affect performance.
- Device Not Charging:
- Clean the solar panel thoroughly.
- Relocate the device to an area with more direct and prolonged sunlight exposure.
- Ensure there are no shadows cast on the solar panel during charging hours.
7. Specifications
Image 7.1: Technical specifications and physical dimensions of the QXMH Solar Outdoor Flash Alarm.
| Feature | Detail |
|---|---|
| Model Number | KS-SL-SJ-US |
| Brand | QXMH |
| Solar Panel | 5V*80mA Mono panel |
| LEDs | 6pcs flashing red LED |
| Battery | 3.7V*400mAH capacity lithium battery |
| Sound Volume | 129dB (dog barking sound) |
| Waterproof Rating | IP55 |
| Charging Method | Solar energy, 6-8 hours charging time |
| Work Time (fully charged) | 10min mode: >24hrs; 20min mode: >40hrs |
| Material | ABS |
| Dimensions (Box) | 11.5 x 9.5 x 5.6 cm |
| Weight (Box) | 0.12 KG |
8. Warranty and Support
QXMH is committed to providing reliable products and customer satisfaction. For any inquiries or assistance, please contact our customer service team. We offer friendly and reliable customer service 24 hours a day.
Please refer to your purchase documentation for specific warranty details and contact information.