Introduction
Thank you for choosing the GXJ 26-inch Counter Height Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain for future reference.
Image: A single GXJ 26-inch counter height swivel bar stool in black faux leather with metal legs, showcasing its design.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble on a soft, clean surface to prevent scratches.
- Tighten all screws firmly, but do not overtighten. Periodically check and re-tighten all fasteners.
- Do not stand on the stool.
- Do not exceed the maximum weight capacity of 300 lbs per stool.
- Keep children away from the assembly area. Small parts may pose a choking hazard.
- Use the stools only on a level surface.
Package Contents
Your GXJ Bar Stools package includes the following components for two stools:
- 2 x Seat Cushions with Backrests (Faux Leather)
- 2 x Swivel Mechanisms
- 2 x Metal Leg Frames with Footrests
- Hardware Pack (Screws, Washers, Allen Wrench)
- Assembly Instructions Manual
Assembly Instructions
Follow these steps to assemble your GXJ Bar Stools. Assembly typically takes 15-30 minutes per stool. It is recommended to have two people for certain steps to ensure proper alignment.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Verify all components are present against the package contents list.
- Attach Swivel Mechanism to Seat: Align the swivel mechanism with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and washers. Ensure the mechanism is centered and all screws are tightened evenly.
- Attach Backrest to Seat: Connect the backrest support frame to the seat cushion using the designated screws. Ensure the backrest is securely attached and stable.
- Attach Leg Frame to Swivel Mechanism: Carefully align the metal leg frame with the swivel mechanism attached to the seat. This step may require some force to align the holes. Insert the screws and tighten them securely.
- Final Tightening: Once all parts are assembled, double-check and tighten all screws to ensure stability. Do not overtighten.
- Attach Floor Glides: Ensure the adjustable floor glides are securely attached to the bottom of each leg. Adjust them as needed to ensure the stool is level and stable on your floor.
Image: Close-up view of the stool's base, highlighting the solid rotating base, anti-slip foot pads, and comfortable footrest.
Video: Official product video demonstrating the features and use of the Faux Leather Swivel Counter Height Bar Stools.
Operating Instructions
Your GXJ Bar Stools are designed for comfortable and versatile use in various settings.
- Swivel Function: The seat features a 360° swivel mechanism, allowing for easy rotation and interaction without moving the entire stool.
- Weight Capacity: Each stool is engineered to support a maximum weight of 300 lbs. Do not exceed this limit to ensure safety and product longevity.
- Footrest: Utilize the integrated footrest for added comfort and support, especially during extended periods of sitting.
Image: Detailed view of the seat cushion, indicating its dimensions for user reference.
Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning: Wipe the faux leather upholstery with a damp cloth. For tougher stains, use a mild soap solution and then wipe clean with a damp cloth, followed by a dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Frame Care: Clean the metal legs with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
- Regular Checks: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
Image: A close-up showing water beading on the faux leather seat, illustrating its water-resistant properties for easy cleaning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool feels wobbly or unstable. | Loose screws; uneven floor; uneven leg glides. | Check and tighten all assembly screws. Adjust the floor glides on the bottom of the legs to level the stool. Ensure the stool is on a flat surface. |
| Difficulty aligning screw holes during assembly. | Parts not perfectly aligned; minor manufacturing tolerance. | Apply gentle pressure or slightly adjust the position of the parts. It may be helpful to have a second person assist with alignment. Do not force screws if they are cross-threading. |
| Swivel mechanism is stiff or noisy. | Lack of lubrication; debris in mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing the rotation. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 18.5"D x 18.9"W x 39.19"H |
| Seat Height | 26 Inches |
| Seat Width | 18.9 Inches |
| Seat Material Type | Faux Leather (Black) |
| Frame Material | Metal (Chrome Finish) |
| Style | Modern |
| Number of Pieces | 2 |
| Assembly Required | Yes |
| Max Load Capacity | 300 lbs per stool |
| Model Number | GXJ-1092BK-1CTN |
Image: A diagram illustrating the key dimensions of the bar stool, including seat height, width, and overall height.
Warranty & Support
Your GXJ Bar Stools are backed by a 3-Year Warranty. This warranty covers manufacturing defects and quality issues. In case of any quality concerns, you are eligible for free returns or exchanges.
For warranty claims, technical support, or any questions regarding your product, please contact GXJ customer service through the retailer's platform or visit the official GXJ website for contact information.