HyperMotion 2-in-1 Garden Seesaw with 360° Rotating Carousel (Model SWING HYP11) Instruction Manual

Introduction

Thank you for choosing the HyperMotion 2-in-1 Garden Seesaw. This manual provides important information for the safe assembly, operation, and maintenance of your new garden play equipment. Please read all instructions carefully before assembly and use, and retain this manual for future reference.

Safety Information

• Adult Supervision Required: Always ensure children are supervised by an adult while using the seesaw.
• Age Recommendation: Suitable for children aged 3 years and above.
• Weight Limit: The seesaw has a maximum weight capacity of 200 kg. Do not exceed this limit.
• Proper Installation: Ensure the seesaw is assembled correctly and placed on a level, soft surface such as grass, sand, or wood chips, at a safe distance from other structures or obstacles.
• Regular Inspection: Before each use, check all nuts, bolts, and connections for tightness. Inspect the frame and seats for any signs of wear, damage, or rust. Replace worn or damaged parts immediately.
• Weather Conditions: Do not use the seesaw in strong winds, rain, or other adverse weather conditions.
• Clothing: Ensure children wear appropriate clothing without loose strings or items that could get caught.
• One Child Per Seat: Only one child should occupy each seat at a time.
• No Standing: Children should not stand on the seesaw seats or frame.
• No Jumping: Do not jump off the seesaw while it is in motion.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact HyperMotion customer service.

• Seesaw Main Beam (1x)
• Central Support Frame (1x)
• Seesaw Seats (2x)
• Handles (2x)
• Assembly Hardware (nuts, bolts, washers, caps)
• Assembly Tools (wrench, Allen key - may vary)
• Instruction Manual (this document)

Setup and Assembly

Assembly requires adult supervision and approximately 30-60 minutes. Two adults are recommended for easier assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
2. Assemble Central Support Frame: Attach the legs to the central pivot point of the support frame using the provided bolts and nuts. Ensure all connections are secure but do not fully tighten yet.

   Image: Close-up of the central support frame, highlighting the robust steel construction.

3. Attach Main Beam to Support: Secure the seesaw's main beam to the central support frame using the designated pivot bolt. This connection allows for the seesaw motion and 360° rotation.
4. Install Seats and Handles: Attach the green seats to each end of the main beam. Then, secure the handles to the main beam, ensuring they are firmly in place for children to grip.

   Image: Detail of an ergonomic green seat and handle.
5. Final Tightening: Once all components are assembled, systematically tighten all nuts and bolts using the provided tools. Do not overtighten, but ensure all connections are firm and stable.
6. Placement: Place the assembled seesaw on a level, soft surface in your garden, away from fences, walls, trees, or other play equipment.

   Image: The HyperMotion 2-in-1 Garden Seesaw fully assembled and ready for use in a garden.

Operating Instructions

The HyperMotion 2-in-1 Garden Seesaw offers both traditional seesaw motion and a unique 360° rotating carousel function.

Traditional Seesaw Function

• Two children sit on opposite seats, holding firmly onto the handles.
• Children push off the ground with their feet to initiate the up-and-down motion.
• Encourage gentle and controlled movements.

360° Rotating Carousel Function

• While seated, children can use their feet to push off the ground and rotate the entire seesaw structure around its central axis.
• The central pivot allows for smooth 360-degree rotation.

  Image: Visual representation of the seesaw's 360-degree rotation feature.

• Ensure the area around the seesaw is clear before engaging in the rotating function.

General Use Guidelines

• Always maintain a firm grip on the handles during use.
• Do not attempt to stand or jump off the seesaw.
• Ensure children are aware of their surroundings to avoid collisions.

Maintenance

• Cleaning: Clean the seesaw regularly with a damp cloth and mild soap. Avoid abrasive cleaners.
• Rust Prevention: The steel frame has an anti-rust coating. However, inspect for scratches or chips in the paint that could lead to rust. Touch up with appropriate rust-resistant paint if necessary.
• Hardware Check: Periodically check all nuts, bolts, and screws for tightness. Tighten as needed to ensure stability and safety.
• Structural Integrity: Inspect the main beam, seats, and support frame for cracks, bends, or other damage. Discontinue use if any significant damage is found and replace parts or the entire unit if necessary.
• Storage: While designed for outdoor use, storing the seesaw indoors during harsh winter months or prolonged periods of non-use can extend its lifespan.

Troubleshooting

Specifications

Image: Detailed dimensions of the seesaw.

Image: Key specifications of the seesaw, including weight capacity, age, and rotation feature.

Warranty and Support

HyperMotion products are manufactured to high-quality standards. For warranty information, product support, or to order replacement parts, please contact HyperMotion customer service through the retailer where the product was purchased or visit the official HyperMotion website.

Please retain your proof of purchase for warranty claims.