LUMIMAN 13 Colors LED Puck Light Bulb User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your LUMIMAN 13 Colors LED Puck Light Bulb. Please read this manual thoroughly before use to ensure proper functionality and longevity of your product.

Image 1.1: The LUMIMAN 13 Colors LED Puck Light Bulb, showcasing its multi-color illumination.

2. Product Features

• AA Battery Operated: No wiring is needed for installation. Each puck light requires 3 AA batteries (not included).
• 13 RGB Colors & Dimmable: Offers 13 distinct color options and adjustable brightness to suit various lighting needs and scenarios.
• Timer Function: Equipped with a timing function to automatically turn off the light after a set period.
• Memory Function: The light remembers the last used color and brightness setting for convenience.
• Tap Control: Easily control the light by tapping the lens to turn on, change colors/modes, and turn off.

3. Package Contents

The LUMIMAN 13 Colors LED Puck Light Bulb package includes:

• 1 x LUMIMAN 13 Colors LED Puck Light Bulb

Note: 3 AA batteries are required for operation and are not included in the package.

4. Setup

4.1 Battery Installation

1. Gently twist the back cover of the puck light counter-clockwise to open the battery compartment.
2. Insert 3 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
3. Replace the back cover and twist clockwise until securely closed.

4.2 Mounting

The puck light can be placed on any flat surface or mounted using appropriate adhesive (not included) for desired locations such as cabinets, closets, or shelves.

5. Operation

5.1 Basic Control (Tap Control)

• Turn On/Change Color: Short press the lens of the puck light to turn it on. Each subsequent short press will cycle through the 13 available colors and modes.
• Turn Off: Long press the lens (approximately 2 seconds) to turn the light off.

5.2 Dimmable Function

While the light is on, continue to short press the lens to cycle through colors. Some modes may offer adjustable brightness. Refer to the specific color cycle for dimming options.

5.3 Timer Function

The puck light includes a timing function. Specific instructions for activating and setting the timer may vary. Typically, a dedicated button on a remote control (if applicable and not included with this model) or a specific tap sequence would activate this feature. Please refer to any supplementary materials for detailed timer setup.

5.4 Memory Function

The light automatically saves the last used color and brightness setting. When you turn the light back on, it will resume the previously selected setting.

6. Maintenance

6.1 Battery Replacement

When the light dims significantly or stops responding, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.

6.2 Cleaning

To clean the puck light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

7. Troubleshooting

• Light does not turn on:
  • Ensure batteries are inserted correctly with proper polarity.
  • Replace old batteries with new ones.
  • Check if the battery compartment cover is securely closed.
• Colors are not changing:
  • Ensure you are performing short presses on the lens.
  • Check battery level; low batteries can affect functionality.
• Light is dim:
  • Replace batteries.
  • Ensure the dimmable function is not set to its lowest brightness.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact LUMIMAN customer service through the retailer's platform or the official LUMIMAN website. Please have your product model number (B0D1QX4KCX) available when contacting support.