Adedad CFJ10
Adedad 20V Cordless Leaf Blower CFJ10 Instruction Manual
Model: CFJ10
Introduction
This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your Adedad 20V Cordless Leaf Blower, Model CFJ10. Please read this manual thoroughly before using the product to ensure proper function and to prevent injury or damage.
The Adedad 20V Cordless Leaf Blower is designed for efficient clearing of leaves, debris, and dust from yards, patios, and other outdoor surfaces. Its lightweight design and variable speed settings offer versatility for various cleaning tasks.
Safety Instructions
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Personal Safety: Always wear eye protection (safety glasses) and hearing protection when operating the leaf blower. Wear long pants, long sleeves, and sturdy footwear. Do not operate the blower barefoot or while wearing open-toed sandals.
- Area Safety: Keep children, bystanders, and pets at least 50 feet (15 meters) away from the operating area. Inspect the work area before use and remove any objects that could be thrown by the air stream, such as rocks, broken glass, or wires.
- Electrical Safety: Use only the specified battery pack and charger for this tool. Do not modify the battery or charger. Do not expose the battery or charger to rain or wet conditions.
- Operation Safety: Never point the blower nozzle at people or animals. Do not operate the blower in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always maintain proper footing and balance. Do not overreach.
- Maintenance Safety: Disconnect the battery pack before performing any adjustments, changing accessories, or storing the tool. Use only manufacturer-recommended replacement parts.
- Battery Care: Do not incinerate the battery pack even if it is severely damaged or completely worn out. Batteries can explode in a fire. Dispose of batteries properly according to local regulations.
Package Contents
Verify that all items are present and in good condition upon opening the package. If any items are missing or damaged, contact customer support.
- Adedad 20V Cordless Leaf Blower Unit
- Blower Tube (Standard)
- Extension Blower Tube
- 20V Lithium-Ion Battery Pack (1 included)
- Battery Charger
- Instruction Manual (this document)

Product Overview
Familiarize yourself with the parts of your leaf blower before operation.
- Main Blower Unit
- Battery Compartment
- Power Switch / Speed Selector
- Handle
- Blower Tube Release Button
- Blower Tube (Standard)
- Extension Blower Tube
- Battery Pack
- Battery Charger Port


Setup
1. Assembling the Blower Tube
- Align the standard blower tube with the outlet on the main blower unit.
- Push the tube firmly until it clicks into place. Ensure the tube release button engages.
- For extended reach, attach the extension blower tube to the standard blower tube in the same manner.
- To remove, press the tube release button and pull the tube away from the unit.

2. Charging the Battery
The battery pack is not fully charged upon purchase. It is recommended to fully charge the battery before first use.
- Connect the charger to a standard electrical outlet.
- Slide the battery pack onto the charger until it clicks into place.
- The charger indicator light will show the charging status (refer to charger manual for specific light patterns).
- Once fully charged, disconnect the battery from the charger and unplug the charger from the outlet.
A full charge typically takes approximately 1 hour. The 2.0Ah Lithium-Ion battery provides 10-15 minutes of runtime depending on speed setting and workload.

3. Installing the Battery
- Ensure the leaf blower is turned off.
- Align the battery pack with the battery compartment on the blower unit.
- Slide the battery pack into the compartment until it locks securely into place.
- To remove the battery, press the battery release button (if present) and slide the battery out.
Operating Instructions
1. Starting and Stopping the Blower
- To Start: Ensure the battery is installed. Press the power button located on the handle. The blower will start at the default speed setting.
- To Stop: Press the power button again.
2. Adjusting Speed Settings
The Adedad leaf blower features two speed settings: Low and High.
- While the blower is running, press the speed selector button (often indicated by fan icons or +/-) to toggle between Low (100 MPH) and High (150 MPH) speeds.
- Use the Low speed for lighter debris or sensitive areas.
- Use the High speed for heavier or wet debris and larger areas.
3. General Operation Tips
- Hold the blower firmly with both hands if necessary, especially when operating at high speed.
- Sweep from side to side, moving debris into piles.
- Avoid blowing debris towards people, animals, or open windows.
- For stubborn or wet debris, use the high-speed setting and direct the airflow at the base of the debris.
- The lightweight design (3.3 lbs) allows for extended use without significant fatigue.


Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your leaf blower.
- Cleaning: After each use, wipe down the exterior of the blower with a clean, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the air intake vents are clear of debris to prevent overheating.
- Battery Care: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not store fully discharged batteries for long periods. Charge the battery periodically if not in use for an extended time (e.g., every 3-6 months).
- Storage: Store the leaf blower in a dry, secure location out of reach of children. Remove the battery pack before storing.
- Inspection: Periodically check all screws and fasteners for tightness. Inspect the blower tubes for cracks or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blower does not start. | Battery not installed correctly. Battery discharged. Power button not pressed. | Ensure battery is fully seated. Charge battery. Press power button firmly. |
| Low air output or weak blowing force. | Battery low on charge. Blower tube obstructed. Operating on low speed. | Recharge battery. Clear any obstructions from the tube or air intake. Switch to high speed. |
| Blower stops unexpectedly. | Battery overheated or discharged. Motor overload protection activated. | Allow battery to cool down and recharge. Reduce workload. Ensure air vents are clear. |
| Battery not charging. | Charger not plugged in. Battery not seated correctly on charger. Faulty charger or battery. | Check power connection. Re-seat battery on charger. Contact customer support if issue persists. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Adedad |
| Model Number | CFJ10 |
| Power Source | Battery Powered |
| Voltage | 20 Volts |
| Max Air Speed | 150 MPH |
| Low Air Speed | 100 MPH |
| Form Factor | Handheld |
| Special Features | Adjustable Speed, Adjustable Tube Length, Compact Design, Lightweight, Rechargeable |
| Item Weight | 3.3 Pounds |
| Product Dimensions | 17.72"L x 7.28"W x 7.28"H |
| Battery Type | Lithium-Ion (2.0Ah) |
| Battery Runtime | 10-15 minutes (per charge) |
Warranty and Support
Adedad products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Adedad website. Keep your purchase receipt as proof of purchase.
For technical assistance, replacement parts, or general inquiries, please contact Adedad customer support. Contact details can typically be found on the product packaging or the brand's official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.