1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Inefala 4+64GB Android Car Stereo. This unit is specifically designed for Hyundai Elantra models from 2011 to 2013, offering an upgraded in-dash experience with advanced features.
2. Package Contents
Verify that all items listed below are included in your package. If any components are missing or damaged, please contact customer support.
- Inefala Android Radio for Hyundai Elantra
- Power Cable
- RCA Harness
- GPS Antenna
- AHD Backup Camera
- Rear Camera Input Cable
- External Microphone
- Dual USB Cable
- Installation Tool & Accessories
Image: Overview of included components and main unit dimensions.
3. Installation
Proper installation is crucial for optimal performance. It is recommended to have this unit installed by a professional if you are unfamiliar with car audio systems.
3.1 Compatibility Check
This unit is designed for Hyundai Elantra models from 2011, 2012, and 2013. The provided wiring harness does not support original cars equipped with an amplifier. Please verify the power cable port on your vehicle matches the provided cable before proceeding.
Image: Comparison of the dashboard before and after installing the Inefala Android Car Stereo.
3.2 Wiring Connections
Refer to the wiring diagrams for correct connections. Ensure all connections are secure to prevent malfunctions.
Image: Detailed view of the stereo's rear ports and corresponding wiring harness connections.
3.3 Backup Camera Wiring
The reversing input cable must be plugged in even if the reversing camera is not used, as WiFi and Bluetooth signals may be affected otherwise.
- Connect Cable 1 and Cable 5 to the positive pole of the car reversing light cable.
- Connect Cable 2 to the negative pole of the car reversing light cable.
- Connect Cable 3 and Cable 4 to the reverse trigger wire of the power cable (labeled "Reverse/Back"). This connection is not needed if your vehicle does not have this wire. Pull it out and connect it if the last step does not work.
Image: Diagram illustrating the connections for the AHD backup camera.
3.4 Pre-Installation Test
Before final installation, perform a quick test:
- Combine the red and yellow wires of the car stereo and connect them to the positive pole of the 12V battery.
- Connect the black wire to the negative pole of the battery.
- After 2 seconds, check if the car stereo screen lights up. If it does, the stereo is functioning normally. If the screen does not light up, recheck the installation procedure.
4. Operating Instructions
This section covers the basic operation and features of your Android car stereo.
4.1 User Interface and Customization
The system features a fully capacitive touchscreen for easy operation. You can customize the appearance of your stereo.
- Backgrounds: Touch the color circle in the lower left corner of the screen to switch between 19 available backgrounds.
- Desktop Themes: Long press the main interface to switch between 59 desktop themes.
Image: Examples of the 19 wallpaper options and 59 desktop themes available for customization.
4.2 CarPlay, Android Auto, and Mirror Link
Connect your smartphone for enhanced functionality, including navigation, music, calls, and messages.
Wireless Connection (CarPlay/Android Auto)
- Turn on your phone's Bluetooth, search for the car stereo's Bluetooth, and pair it.
- Click the "CPLink" / "Android Auto" app on the car stereo. (If your phone is an Android device, you may need to install the "Android Auto" app in advance).
- Wait for a few seconds, and the CarPlay/Android Auto wireless connection will happen automatically.
- After the first successful connection, it will start automatically. You can then use voice assistant, navigation, music playback, and make/receive phone calls.
Wired Connection (CarPlay/Android Auto)
- Connect your iOS / Android cell phone via the original USB cable.
- Click the "CPLink" / "Android Auto" app on the car stereo. (For Android phones, you may need to install the "Android Auto" app in advance).
- Wait for a few seconds, and the CarPlay/Android Auto wired connection will happen automatically.
Note: For some Samsung and Huawei phones, Android Auto and Mirror Link functionality may not be fully supported. The phone needs to support Google Services and have the "Android Auto" app installed.
Image: Visual representation of wireless CarPlay, Android Auto, and Mirror Link connections.
Image: Display showing the integration of Apple CarPlay and Android Auto on the stereo screen.
Image: Illustration of the Mirror Link feature, displaying phone content on the car stereo.
4.3 GPS Navigation and WiFi Hotspot
The head unit includes a built-in GPS module. Navigation software like Waze and free offline maps can be utilized. Connect to WiFi or a mobile hotspot for online maps and to download apps from the Play Store (e.g., YouTube, TikTok).
Image: Display of GPS navigation and available apps via WiFi/hotspot connection.
4.4 Hands-free Bluetooth & FM/RDS Radio
The car stereo supports hands-free calling, phone book download, and music playback via Bluetooth. The built-in microphone ensures clear communication. The stable FM/RDS radio allows you to preset 18 stations and provides channel broadcasts, weather forecasts, and real-time road conditions.
Image: Screenshots showing the Bluetooth calling interface and FM/RDS radio tuner.
4.5 Steering Wheel Control
The unit supports steering wheel button functions. You can learn and assign desired functions through the settings.
Image: Interface for learning and assigning steering wheel control functions.
Steering Wheel Control Setup
If your vehicle does not have a CANBUS box, activation of steering wheel controls requires key learning in settings. If it has a CANBUS box, connect the 20-pin white port in the power cable to the CANBUS itself, and the remaining 8-pin white port to the corresponding port on the back of the radio. Match the car model in CANBUS Matching Path: Settings -> Factory Setup (Password 1234) -> Can Settings.
Image: Detailed instructions and interface for setting up steering wheel controls.
4.6 AHD Backup Camera
The Inefala radio is equipped with an AHD camera. When connected, the radio screen will display the rearview camera feed automatically when reversing, assisting with parking maneuvers.
Image: Display of the AHD reversing camera view on the car stereo screen.
4.7 Additional Features
- 32-band EQ DSP: Adjust audio frequencies for a customized listening experience.
- Split Screen: Run two applications simultaneously on the screen.
- High Resolution: 1280x720 screen resolution supporting 1920x1080P video playback.
Image: Visuals demonstrating the 32-band DSP, split-screen functionality, and high-resolution display.
Video: This video demonstrates the various function interfaces of the Android car stereo, including navigation, media playback, and settings. It provides a visual guide to navigating the system's user interface.
5. Specifications
| Model Name | RM |
| Screen Size | 9 Inches |
| Screen Resolution | 1280x720 |
| Video Playback | Supports 1920x1080P |
| Processor | 8 Core |
| Memory (RAM) | 4GB |
| Storage (ROM) | 64GB |
| Operating System | Android 15 (as per product title, though feature bullets mention Android 13) |
| Connectivity | Bluetooth, USB, Wi-Fi |
| Bluetooth Version | 5.0 |
| Audio Output Mode | Stereo |
| Equalizer | 32-band EQ DSP |
| Map Type | Worldwide (Offline maps available) |
| Mounting Type | Dashboard Mount |
| Item Weight | 5.65 pounds |
| Package Dimensions | 15.35 x 11.81 x 4.33 inches |
6. Troubleshooting
If you encounter issues, please refer to the following common troubleshooting steps:
- No Power: Ensure all power cables are correctly connected and secure. Check the vehicle's fuse box for any blown fuses. Re-perform the pre-installation test (Section 3.4).
- No Sound: Verify speaker connections. Check audio settings in the stereo's menu, including volume levels and EQ settings. Ensure the correct audio source is selected.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the stereo and your phone. Delete previous pairings and try reconnecting. Some phone models may have compatibility limitations (refer to Section 4.2).
- GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky. Check GPS settings in the stereo.
- Touchscreen Unresponsive: Try restarting the unit. If the issue persists, contact customer support.
- Backup Camera Not Displaying: Verify all camera wiring connections, especially the reverse trigger wire (Section 3.3). Ensure the camera type setting in the factory menu is correct (CVBS or AHD).
- Steering Wheel Controls Not Working: Perform the key learning procedure as described in Section 4.5. Ensure CANBUS connections are correct if applicable.
7. Warranty and Support
Inefala provides a warranty for this product. For specific warranty details, please refer to your purchase documentation or contact customer support.
7.1 How to Reach Us
If you require technical assistance or have questions, please follow these steps:
- Click on "Inefala Direct" (the seller).
- Click "Ask a question".
- Provide details of your issue, including relevant pictures or videos, to help our customer service team assist you efficiently.
You can also reach us via email for 24-hour customer support:
Email: inefalaservices@163.com
Image: Instructions on how to contact customer support through the Amazon platform.
Image: Inefala customer service email address for direct support.
