Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your LAGAN integrated dishwasher, 45 cm. Please read it thoroughly before using the appliance and keep it for future reference.
Figure 1: LAGAN Integrated Dishwasher, 45 cm
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using the dishwasher.
- Do not touch the heating element during or immediately after use.
- Use only detergents and rinse aids recommended for automatic dishwashers.
- Keep children away from the dishwasher, especially when the door is open.
- Ensure the appliance is properly grounded.
- Do not operate the dishwasher if it has a damaged power cord or plug.
- Only qualified personnel should perform installation and repairs.
Setup and Installation
The LAGAN integrated dishwasher is designed for built-in installation. Proper installation is crucial for optimal performance and safety.
Dimensions and Placement
Before installation, ensure the designated space meets the following dimensions:
- Width: 44.8 cm
- Depth: 55.0 cm
- Height: 83.5 cm (Min. installation height: 84.0 cm, Max. installation height: 88.0 cm)
- Cord length: 1.5 m
- Weight: 32 kg
Figure 2: Installation Dimensions and Connection Points
This diagram illustrates the required space and typical connection points for water supply, drainage, and electrical power. Ensure adequate clearance and access for maintenance.
Initial Checks
- Unpack the dishwasher carefully and check for any transit damage.
- Ensure all accessories, including the user manual, are present.
- Verify that the electrical supply, water inlet, and drain connections are readily accessible and meet local regulations.
Operating Instructions
Familiarize yourself with the control panel and loading procedures for efficient dishwashing.
Control Panel Overview
Figure 3: Dishwasher Control Panel
The control panel features a digital display and various buttons for program selection, delay start, and power.
Loading the Dishwasher
Proper loading ensures optimal cleaning results and prevents damage to dishes.
- Scrape off large food particles before loading.
- Place larger items in the lower rack and smaller items, glasses, and cups in the upper rack.
- Ensure items do not block the spray arms.
- Use the dedicated cutlery basket for forks, spoons, and knives.
Figure 4: Fully Loaded Dishwasher Racks
This image demonstrates a typical loading configuration for various dishware.
Figure 5: Cutlery Basket Usage
Proper placement of cutlery ensures thorough cleaning and prevents damage.
Figure 6: Glassware Placement
Securely place delicate glassware to prevent breakage during the wash cycle.
Selecting a Wash Cycle
The dishwasher offers 3 option cycles and 6 settings for various washing needs. The main cycle options include:
- Normal: For everyday dishware and glassware with typical soil.
- Intensive: For heavily soiled pots, pans, and dishes.
- Rinse: A quick rinse cycle for dishes that will be washed later.
Refer to the control panel for specific program indicators and select the appropriate cycle based on the load's soil level and type of dishes.
Care and Maintenance
Regular cleaning and maintenance will prolong the life of your dishwasher and ensure optimal performance.
- Cleaning the Filters: Regularly check and clean the filter system at the bottom of the dishwasher to remove food particles.
- Cleaning the Spray Arms: Ensure the holes in the spray arms are not clogged. Remove and rinse them if necessary.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners.
- Interior Cleaning: Periodically run an empty cycle with a dishwasher cleaner to remove grease and limescale buildup.
- Salt and Rinse Aid: Check and refill the salt and rinse aid dispensers as indicated by the control panel.
Troubleshooting
Before contacting service, refer to the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power supply issue, door not closed properly, program not selected. | Check power connection, ensure door is latched, select a wash program. |
| Dishes are not clean | Improper loading, clogged spray arms, insufficient detergent, incorrect program. | Reload dishes correctly, clean spray arms and filters, use adequate detergent, select appropriate program. |
| Water not draining | Clogged drain filter or hose, kinked drain hose. | Clean drain filter, check drain hose for obstructions or kinks. |
| Excessive noise | Dishes rattling, foreign object in pump, improper installation. | Rearrange dishes, check for foreign objects, ensure dishwasher is level. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Generic |
| Model Number | IK.104.756.20 |
| Installation Type | Built-In |
| Width | 44.8 cm |
| Depth | 55.0 cm |
| Height | 83.5 cm |
| Min. Installation Height | 84.0 cm |
| Max. Installation Height | 88.0 cm |
| Cord Length | 1.5 m |
| Weight | 32 kg |
| Voltage | 230 Volts (AC) |
| Number of Settings | 6 |
| Cycle Options | Normal, Intensive, Rinse |
| Material | Polypropylene (PP) |
| Included Components | User Manual |
| Special Features | Integrated, Extended Warranty |
Warranty and Support
This LAGAN integrated dishwasher comes with a 2-year guarantee. Please refer to the guarantee brochure included with your purchase for full terms and conditions.
For technical support, spare parts, or warranty claims, please contact the retailer or manufacturer's customer service. Ensure you have your model number (IK.104.756.20) and purchase details ready.