Introduction
This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Generic PAX/FORSAND wardrobe combination. Please read this manual thoroughly before beginning assembly or use to ensure safe and correct installation and to maximize the lifespan of your product.
Safety Information
- Always follow assembly instructions carefully. Incorrect assembly can lead to instability and potential injury.
- Ensure all fittings are securely tightened. Periodically check and re-tighten as necessary.
- Do not overload shelves or hanging rails. Distribute weight evenly.
- For safety, this wardrobe must be securely fastened to the wall using the provided wall attachment device. Different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home (not included).
- Keep small parts out of reach of children during assembly.
Setup and Assembly
Before starting, ensure you have all components and the necessary tools. It is recommended to assemble the wardrobe on a soft, clean surface to prevent scratches.
Tools Required (Not Included):
- Screwdriver (Phillips head and flathead)
- Hammer
- Measuring tape
- Level
- Drill (for wall attachment)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list (not provided in this manual, refer to original packaging).
- Assemble Frame: Begin by connecting the side panels to the base and top panels using the provided fasteners. Ensure all connections are snug.
- Install Back Panel: Slide or nail the back panel into the designated grooves or onto the frame. This adds stability to the structure.
- Attach Doors: Mount the door hinges to the wardrobe frame and then attach the doors. Adjust hinges as needed for proper alignment and smooth operation.
- Install Interior Fittings: Insert shelves, hanging rails, and any other internal accessories according to your desired configuration.
- Secure to Wall: Position the wardrobe in its final location. Using the wall attachment device, secure the wardrobe to the wall to prevent tipping. This step is critical for safety.

Image: The Generic PAX/FORSAND wardrobe combination in its closed state, showcasing its exterior design.

Image: The Generic PAX/FORSAND wardrobe combination with its doors open, illustrating the internal storage layout with shelves and hanging space.
Operating Instructions
The PAX/FORSAND wardrobe is designed for straightforward use.
- Opening/Closing Doors: Gently pull the handles to open the doors. Push them firmly to close. Avoid slamming to prevent damage to hinges and frame.
- Adjusting Shelves: If your wardrobe includes adjustable shelves, carefully remove items, lift the shelf, and reposition the shelf supports to the desired height. Ensure the shelf is level and securely seated before placing items back.
- Weight Distribution: Distribute the weight of your belongings evenly across shelves and hanging rails to maintain stability and prevent warping.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your wardrobe.
- Cleaning: Wipe surfaces with a damp cloth and a mild cleaner. Dry immediately with a clean cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Dusting: Regularly dust all surfaces to prevent buildup.
- Hardware Check: Periodically check all screws, bolts, and fittings to ensure they are tight. Re-tighten as necessary to maintain structural integrity.
- Door Alignment: If doors become misaligned, adjust the hinges according to the hinge manufacturer's instructions (typically found on the hinge itself or in the original assembly guide).
Troubleshooting
Here are solutions to common issues you might encounter:
- Wardrobe is Wobbly:
- Ensure all fasteners are tightened.
- Verify the wardrobe is on a level surface. Use shims if necessary.
- Confirm the back panel is correctly installed and secured.
- Ensure the wardrobe is securely anchored to the wall.
- Doors Do Not Close Properly:
- Check hinge alignment. Adjust hinges using a screwdriver until doors close smoothly and are level.
- Ensure no items inside the wardrobe are obstructing the doors.
- Drawers Stick or Are Difficult to Open:
- Check that drawer runners are correctly installed and aligned.
- Ensure drawers are not overloaded.
- Clean drawer runners to remove any dust or debris.
Specifications
| Brand: | Generic |
| Model: | PAX/FORSAND Wardrobe Combination |
| Assembled Width: | 150.0 cm |
| Assembled Depth: | 60.0 cm |
| Assembled Height: | 201.2 cm |
| Mounting Type: | Floor Mount (requires wall attachment) |
| Manufacturer: | ProTuning |
| First Available: | December 19, 2023 |
Warranty and Support
This product comes with a 10-year guarantee. For detailed terms and conditions of the guarantee, please refer to the guarantee brochure that accompanied your purchase.
For further assistance, missing parts, or specific troubleshooting not covered in this manual, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.
Important Note for International Customers:
Customers ordering from outside the EU may be subject to import duty and tax. Please check with your local postal or tax office regarding your country's import regulations before purchase or for any related inquiries.