Introduction
Welcome to the MOZA R5 Bundle Kit. This comprehensive gaming racing simulator provides an immersive and realistic racing experience with its 5.5 Nm Direct Drive Wheel Base, 11-inch ES Racing Wheel, SR-P Lite Dual Pedals, and Desk Clamp. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your MOZA R5 Bundle Kit.
Figure 1: Complete MOZA R5 Bundle Kit components.
Safety Information
- Always ensure all connections are secure before operating the simulator.
- Keep hands and fingers clear of moving parts, especially the wheel base and pedal mechanisms, during operation.
- Do not expose the components to water or excessive moisture.
- Use only the power adapter supplied with the MOZA R5 Bundle Kit.
- Ensure proper ventilation around the wheel base to prevent overheating.
- This product is intended for indoor use only.
Package Contents
Verify that all items listed below are included in your package:
- MOZA R5 Direct Drive Wheel Base
- MOZA ES Racing Wheel (11-inch)
- MOZA SR-P Lite Dual Pedals
- Desk Clamp
- Power Adapter and Cable
- USB Cable
- Mounting Screws and Tools
- User Manual (this document)
Setup Guide
1. Installing the Desk Clamp and Wheel Base
Attach the desk clamp to the MOZA R5 Wheel Base using the provided screws. Position the wheel base on a sturdy desk or table and secure it firmly using the clamp's adjustment knobs. Ensure the clamp is tightened sufficiently to prevent movement during use.
Figure 2: MOZA R5 Wheel Base mounted securely with the desk clamp.
Note: For optimal performance and stability, consider mounting the wheel base to a dedicated racing cockpit if available.
2. Attaching the ES Racing Wheel
Align the quick-release mechanism on the ES Racing Wheel with the shaft on the MOZA R5 Wheel Base. Push the wheel onto the shaft until it clicks into place, indicating a secure connection. To remove, pull back the quick-release collar and slide the wheel off.
Figure 3: MOZA ES Racing Wheel, ready for attachment.
3. Connecting the SR-P Lite Dual Pedals
Place the SR-P Lite Dual Pedals on the floor in a comfortable position. Connect the pedal unit to the MOZA R5 Wheel Base using the provided cable. Ensure the cable is routed safely to avoid tripping hazards.
Figure 4: MOZA SR-P Lite Dual Pedals.
4. Power and USB Connections
Connect the power adapter to the MOZA R5 Wheel Base and then plug it into a wall outlet. Connect the USB cable from the wheel base to an available USB port on your PC.
5. Software Installation (MOZA Pit House)
Download and install the latest version of MOZA Pit House software from the official MOZA Racing website. This software is essential for firmware updates, calibration, and customizing your racing experience.
Figure 5: MOZA Pit House software interface for configuration.
Operating Instructions
1. Powering On/Off
Once all connections are made, the MOZA R5 Wheel Base will power on automatically when connected to power and a PC. To power off, simply disconnect the power cable.
2. Basic Controls
- ES Racing Wheel: Features various buttons, rotary encoders, and paddle shifters for in-game control. Refer to your game's control settings for specific assignments.
- SR-P Lite Dual Pedals: Includes an accelerator and brake pedal. The sensitivity and dead zones can be adjusted via the MOZA Pit House software.
- Direct Drive Wheel Base: Provides force feedback directly to the wheel, simulating realistic driving sensations.
3. Using MOZA Pit House Software
MOZA Pit House is your central hub for managing the R5 Bundle.
- Device Monitoring: View the status of your wheel base, wheel, and pedals.
- Settings Adjustment: Customize force feedback strength, damping, friction, wheel rotation angle, pedal sensitivity, and more.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and compatibility.
- Game Presets: Load pre-configured settings optimized for popular racing titles.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the wheel, pedals, and wheel base. Avoid abrasive cleaners or solvents.
- Cable Management: Ensure all cables are neatly organized and not under tension to prevent damage.
- Storage: When not in use, store the simulator in a clean, dry environment away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to wheel base. | Power cable disconnected; faulty power adapter. | Check power connections; try a different outlet; contact support if adapter is faulty. |
| Wheel not recognized by PC/game. | USB cable disconnected; MOZA Pit House not running; outdated drivers/firmware. | Ensure USB connection is secure; open MOZA Pit House; update firmware/drivers via Pit House. |
| No force feedback or weak force feedback. | Force feedback settings too low in game or Pit House; game not configured for direct drive. | Adjust force feedback settings in MOZA Pit House and in-game; ensure game supports direct drive wheels. |
| Pedals not responding. | Pedal cable disconnected; calibration issue. | Check pedal cable connection to wheel base; recalibrate pedals in MOZA Pit House. |
Specifications
- Product Name: MOZA R5 Bundle Kit Gaming Racing Simulator
- Model Number: RS20
- Brand: MOZA
- Wheel Base Torque: 5.5 Nm Direct Drive
- Wheel Material: Microfiber Leather (ES Racing Wheel)
- Wheel Diameter: 11-Inch (ES Racing Wheel)
- Pedal Type: SR-P Lite Dual Pedals
- Construction Materials: Aviation-grade aluminum, high-strength steel (for durability)
- Connectivity: USB to PC
- Compatibility: PC
- Manufacturer: Gudsen
- Item Weight: Approximately 7.24 pounds (for the bundle)
Warranty and Support
For detailed warranty information and technical support, please visit the official MOZA Racing website or contact their customer service. Keep your proof of purchase for warranty claims.
Official MOZA Racing Website: mozaracing.com
