BOO BOX 6ft Witch
BOO BOX 6ft Animatronic Witch Instruction Manual
Model: 6ft Witch (B0D156MS1R)
Introduction and Safety Information
Thank you for choosing the BOO BOX 6ft Animatronic Witch. This product is designed to enhance your Halloween decorations with its animated features, lights, and sounds. Please read this manual thoroughly before assembly and operation to ensure safe and correct usage.
Important Safety Warnings:
- This product is not a toy. Keep out of reach of small children.
- Adult assembly is required. Assembly should be performed by two adults for safety and ease.
- For outdoor use, this product must be placed in a covered area to protect it from direct rain and harsh weather conditions. Exposure to direct moisture can damage the electronics and void the warranty.
- Ensure all electrical connections are secure and protected from moisture. Use only the provided power adapter.
- Position the animatronic on a stable, level surface. Secure the base using the provided ties or additional anchoring methods to prevent tipping.
- Keep hands and loose clothing away from moving parts during operation.
- Disconnect power when not in use or during assembly/disassembly.

Image: The BOO BOX 6ft Animatronic Witch, featuring a green-faced witch figure in a hooded robe, holding a light-up broom, with a bubbling cauldron beside her.
Package Contents
Please verify that all components are present before beginning assembly:
- 1x 6ft Animatronic Witch Figure (pre-dressed)
- 1x Light-up Broom (with internal wiring)
- 1x Bubbling Cauldron (with internal light/sound unit)
- 1x Metal Stand (base and support poles)
- Several Security Ties
- 1x Function Control Box
- 1x 5.9V 2A DC Power Adapter
- Instruction Manual (this document)
Setup Instructions
Assembly requires two adults. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface to identify each piece.
- Assemble the Metal Stand: Connect the base pieces and vertical support poles of the metal stand according to the diagrams provided in the physical manual (if applicable). Ensure all connections are firm.
- Attach Witch Figure to Stand: Carefully lift the witch figure and attach it to the assembled metal stand. Ensure the figure is securely mounted and balanced.
- Connect Internal Wiring: The witch figure comes pre-dressed. Locate the wiring connections, typically under the robes near the torso. Connect the wires from the witch's head, arms, and internal mechanisms to the corresponding ports on the function control box.
Note: Accessing these connections may require careful manipulation of the robes. It is recommended to connect these wires before fully securing the robes if possible, or to ensure adequate access for connection.
- Position Broom and Cauldron: Place the light-up broom into the witch's hand. Position the bubbling cauldron near the witch. Connect the cauldron's power cable to the function control box or a separate power source as indicated by the physical manual.
- Secure the Animatronic: Use the provided security ties to anchor the metal stand to the ground or a stable structure, especially if placed outdoors. For enhanced stability, particularly in windy conditions or on uneven surfaces, consider using additional ground stakes or tying the figure to a wall or pillar.
- Connect Power Adapter: Plug the 5.9V 2A DC power adapter into the function control box, then plug the adapter into a standard electrical outlet. Ensure the outlet is protected from moisture if used outdoors.

Image: A close-up view of the animatronic witch's face, showing her green skin, blue lips, and piercing eyes, with her hooded cloak.
Operating Instructions
Once assembled and powered on, the BOO BOX Animatronic Witch operates as follows:
- Power On: Ensure the power adapter is securely plugged into both the control box and a power outlet. The unit should automatically enter standby mode or begin its sequence.
- Motion and Sound Activation: The animatronic is equipped with a motion sensor. When movement is detected within approximately a 6-foot range, the witch will activate.
- Animated Sequence: Upon activation, the witch's LED eyes will light up, her head will rotate, her mouth will move, and she will speak pre-recorded spooky phrases. Her left arm will also move. This sequence typically runs for about one minute before resetting.
- Cauldron and Broom Effects: The cauldron will emit a bubbling light effect, and the broom will glow with LED lights during the activation sequence.
- Continuous Operation: The animatronic will repeat its activation sequence each time motion is detected within its sensor range.

Image: A side profile of the animatronic witch, showing her flowing robes and the light-up broom held in her hand, with the cauldron nearby.
Maintenance
Proper care will extend the life of your animatronic witch:
- Cleaning: Wipe clean with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Environmental Protection: If used outdoors, always ensure the unit is under a covered area to protect it from rain, snow, and excessive moisture. Direct exposure to water can cause electrical malfunction.
- Storage: When not in use, disassemble the unit carefully and store it in its original packaging or a protective container in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Management: Periodically check all cables and connections for signs of wear or damage. Replace any damaged components immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Animatronic does not power on or activate. |
|
|
| Motion sensor not activating. |
|
|
| Animatronic is unstable or tips over. |
|
|
| Lights or sounds not working. |
|
|
| Product stopped working after rain. |
|
|
Specifications
| Model | 6ft Witch |
| Brand | BOO BOX |
| Product Dimensions (Approx.) | 30"D x 30"W x 72"H (76cm D x 76cm W x 183cm H) |
| Item Weight | 22 Pounds (10 kg) |
| Material | Plastic |
| Power Adapter | 5.9V 2A DC |
| Features | LED eyes, glowing broom, bubbling cauldron, moving hand, moving mouth, rotating head, sound, motion activated. |
| Recommended Use | Outdoor (covered conditions) |

Image: A diagram illustrating the approximate dimensions of the 6ft Animatronic Witch, showing a height of 72 inches and a width of 30 inches.
Warranty and Support
Warranty information for your BOO BOX 6ft Animatronic Witch is typically included with the product packaging or available directly from the manufacturer. Please retain your proof of purchase for any warranty claims.
For further assistance, troubleshooting, or to inquire about replacement parts, please contact BOO BOX customer support. You may also visit the official BOO BOX store for more information:
No official seller videos were found for this product at the time of manual creation.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.