Introduction
This manual provides essential information for the assembly, operation, and maintenance of your Liink1Ga Breakfast Table Set for 4. This set includes one rectangular dining table with a clear glass top and four chairs with black PU leather seats, designed for compact spaces.
Please read these instructions carefully before assembly and retain this manual for future reference.
Image: The Liink1Ga Breakfast Table Set for 4, featuring a rectangular glass table and four chairs, arranged in a modern dining setting.
Safety Information
Always prioritize safety during assembly and use. Please observe the following guidelines:
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the product on a soft, clean surface to prevent scratches.
- Do not fully tighten all bolts until the entire unit is assembled, then tighten securely.
- Keep small parts away from children during assembly.
- Do not stand on the table or chairs.
- Distribute weight evenly on the table surface.
- Regularly check and tighten all fasteners to ensure stability.
- The table has a weight capacity of 220 lbs (100 kg). Each chair has a weight capacity of 330 lbs (150 kg). Do not exceed these limits.
Package Contents
Your Liink1Ga Breakfast Table Set for 4 is shipped in one parcel and includes the following components:
- 1 x Rectangular Dining Table (Glass Top, Metal Frame)
- 4 x Dining Chairs (Metal Frame, PU Leather Seat)
- Assembly Hardware (bolts, washers, Allen wrench)
- Instruction Manual
Image: An overview of the Liink1Ga Breakfast Table Set, showing the rectangular glass table and four chairs from an elevated angle.
Setup and Assembly
Assembly of the Liink1Ga Breakfast Table Set requires 1-2 people and an Allen wrench (provided). Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Verify all listed components are present.
- Assemble the Table Frame:
- Attach the table legs to the table frame using the provided bolts and washers. Hand-tighten only at this stage.
- Ensure the frame is stable and level before proceeding.
- Attach the Glass Tabletop:
- Carefully place the glass tabletop onto the assembled table frame. Ensure it aligns with the pre-drilled holes or suction cups/pads designed to secure it.
- Secure the glass top according to the specific instructions in your included manual (e.g., using screws, suction cups, or rubber stoppers).
- Assemble the Chairs: For each chair:
- Attach the chair backrest to the seat frame.
- Attach the chair legs to the seat frame.
- Hand-tighten all bolts initially.
- Final Tightening: Once all table and chair components are loosely assembled, place them on a level surface. Systematically tighten all bolts securely using the Allen wrench. Do not overtighten.
Image: Four individual chairs of the Liink1Ga dining set, ready for assembly or placement.
Operating Instructions (Usage)
Your Liink1Ga Breakfast Table Set is designed for dining and general household use. Observe the following for optimal use:
- Placement: Position the table and chairs on a flat, stable surface. Avoid placing in direct sunlight or near heat sources to prevent material degradation.
- Space-Saving Design: The chairs are designed to tuck neatly under the table when not in use, optimizing space in smaller areas.
- Weight Distribution: For the table, distribute items evenly across the glass surface. Avoid placing heavy objects on the edges.
- Chair Use: Sit centrally on the chairs. Avoid leaning back excessively or using chairs as step stools.
Image: A visual representation of the space-saving design, illustrating how the chairs can be stored under the table when not in use.
Maintenance
Proper care will extend the life and appearance of your dining set:
- Cleaning the Glass Top: Wipe the tempered glass tabletop with a soft, damp cloth and a mild glass cleaner. Dry immediately with a clean, lint-free cloth to prevent streaks. Avoid abrasive cleaners or scouring pads.
- Cleaning Metal Frame: Wipe the powder-coated metal frame with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry thoroughly.
- Cleaning PU Leather Seats: Wipe the PU leather seats with a soft, damp cloth. For spills, blot immediately and clean with a mild soap solution, then wipe dry. Avoid harsh chemicals or excessive moisture.
- Regular Inspection: Periodically check all bolts and fasteners for tightness. Re-tighten as necessary to maintain structural integrity.
- Protection: Use placemats or coasters to protect the glass surface from scratches and heat.
Image: Detail of the clear glass tabletop secured to the black metal frame, highlighting the materials.
Image: A close-up view of the black PU leather material used for the chair seats, showing its texture.
Troubleshooting
If you encounter issues with your Liink1Ga Breakfast Table Set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Chair wobbles | Loose fasteners; uneven floor. | Check and tighten all bolts. Ensure the product is on a level surface. Adjust leg levelers if present. |
| Glass top not secure | Improper placement; securing mechanism not engaged. | Ensure the glass is correctly seated on the frame and any securing screws or suction cups are properly applied. |
| Difficulty assembling | Incorrect part orientation; bolts overtightened prematurely. | Review the assembly instructions carefully. Loosen all bolts, re-align parts, then hand-tighten before final tightening. |
| Scratches on glass/frame | Abrasive cleaning; sharp objects. | Use soft cloths for cleaning. Avoid dragging objects across surfaces. Minor scratches on glass may be reduced with specialized glass polish. |
Specifications
Detailed specifications for the Liink1Ga Breakfast Table Set:
- Model: B0D15447S4
- Brand: Liink1Ga
- Materials: Tempered Glass, Metal (Powder-Coated), PU Leather
- Color: Clear Glass, Black Metal Frame, Black PU Leather Seats
- Table Dimensions (L x W x H): 43.21" x 27.56" x 29.53" (110 cm x 70 cm x 75 cm)
- Chair Dimensions (W x D x H): 15.75" x 15.75" x 35.43" (40 cm x 40 cm x 90 cm)
- Table Weight Capacity: 220 lbs (100 kg)
- Chair Weight Capacity: 330 lbs (150 kg) per chair
- Shape: Rectangular (Table)
- Assembly Required: Yes (1-2 person recommended)
- Care Instructions: Wipe with Dry Cloth (for general cleaning)
Image: A technical drawing illustrating the precise dimensions of both the dining table and a single chair in centimeters and inches.
Warranty and Support
For warranty information or customer support regarding your Liink1Ga Breakfast Table Set, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
Manufacturer: Liink1Ga
For further assistance, you may visit the official Liink1Ga store on Amazon: Liink1Ga Store