KOTEK PI-HW702-HW 3-Piece Patio Furniture Set User Manual

Introduction

Thank you for choosing the KOTEK PI-HW702-HW 3-Piece Patio Furniture Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before assembly and retain them for future reference.

Important Safety Information

• Weight Capacity: Do not overload the furniture. The coffee table has a maximum load capacity of 165 lbs (75 kg). Each chair has a maximum load capacity of 400 lbs (181 kg). Exceeding these limits may result in damage or injury.
• Assembly Caution: Be cautious during assembly. Do not tighten screws completely until all holes are aligned and fixed. This prevents misalignment and potential damage to the frame.
• Stable Surface: Always place the furniture on a flat, stable, and level surface to prevent tipping.
• Weather Protection: While weather-resistant, prolonged exposure to extreme weather conditions (heavy rain, snow, strong winds) may reduce the lifespan of the furniture. Consider using a furniture cover or storing cushions indoors during harsh weather.
• Children Safety: Keep children away from the assembly area. Small parts can be a choking hazard.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Single Sofa Chairs
• 2 x Seat Cushions
• 2 x Back Cushions
• 1 x Coffee Table with Tempered Glass Top
• Assembly Hardware (screws, Allen wrench)

Setup and Assembly

Assembly is required for this furniture set. It is recommended to have two people for easier and quicker assembly. Please follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (like a blanket or cardboard) to prevent scratches.
2. Identify Parts: Refer to the parts list and diagrams to identify each component.
3. Assemble Chairs:
   • Attach the backrest to the seat frame using the provided screws.
   • Attach the side panels to the seat and backrest.
   • Important Tip: During this stage, only hand-tighten the screws. Do not fully tighten any screws until all components are loosely assembled and all holes are aligned.
4. Assemble Coffee Table:
   • Assemble the frame of the coffee table.
   • Place the tempered glass tabletop onto the table frame. Ensure the 4 suction cups firmly fix the tabletop in place to prevent sliding.
5. Final Tightening: Once all furniture pieces are assembled and all holes are aligned, go back and fully tighten all screws using the Allen wrench. Do not overtighten.
6. Place Cushions: Position the seat and back cushions onto the chairs.

Operating and Usage

This KOTEK patio furniture set is designed for outdoor use, providing a comfortable and stylish seating area.

• Placement: Ideal for patios, gardens, backyards, balconies, porches, and poolside areas. Ensure the furniture is placed on a flat, stable surface.
• Comfort: The chairs feature ergonomic backrests and curved armrests for optimal comfort. The high-resilience sponge cushions provide a soft seating experience.
• Coffee Table Functionality: Use the tempered glass coffee table to hold drinks, snacks, books, or small decorative items.

Care and Maintenance

• General Cleaning: Wipe the PE rattan and metal frame with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly.
• Cushion Care: The seat cushions feature a zipper, making the covers removable and washable. Machine wash cold on a gentle cycle or hand wash. Air dry only; do not tumble dry. Keep cushions dry for a longer service life.
• Tempered Glass Top: Clean the glass tabletop with a glass cleaner and a soft cloth. Avoid abrasive cleaners or scouring pads that could scratch the surface.
• Winter Storage: During off-season or harsh weather, it is recommended to store the furniture indoors or cover it with a weather-resistant furniture cover to protect it from elements and extend its lifespan.

Troubleshooting

If you encounter any issues with your KOTEK patio furniture set, please refer to the following common solutions:

• Wobbly Furniture: Ensure all screws are fully tightened. If the issue persists, check that the furniture is placed on a completely level surface. Adjust the position if necessary.
• Glass Tabletop Sliding: Verify that the four suction cups beneath the tempered glass tabletop are properly attached and creating a secure seal.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are correctly oriented and that screws are only hand-tightened until all components are aligned before final tightening.
• Damaged or Missing Parts: If any parts were damaged during shipping or are missing from the package, please contact KOTEK customer support immediately for assistance.

Specifications

Warranty and Customer Support

KOTEK is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this document, KOTEK offers a 30-day easy return policy for products purchased through Amazon. For any questions, concerns, or assistance with assembly or product issues, please contact KOTEK customer support through the retailer where the product was purchased.

You can typically find customer support contact information on the product's purchase page or by visiting the official KOTEK store on Amazon: KOTEK Store.