Introduction
Thank you for choosing the SmrtMugg GO v2 Heated Coffee Mug. This manual provides essential information for the safe and efficient use of your new heated travel mug. Please read these instructions carefully before first use and retain them for future reference.
Product Overview
The SmrtMugg GO v2 is designed to maintain your coffee or tea at an optimal drinking temperature of approximately 131°F (55°C). Its portable design and magnetic charging make it ideal for use at home, in the office, or on the go.
Key Features:
- Optimal Temperature Maintenance: Keeps beverages at approximately 131°F (55°C) for enhanced flavor and safety.
- Extended Battery Life: Provides up to 90 minutes of heating on a full charge, or all-day warmth when connected to the magnetic charging cord.
- Smart Display: Shows current temperature in Fahrenheit or Celsius, and remaining battery life.
- Magnetic Charging: Easy and secure connection for charging.
- Durable Construction: Insulated, BPA-free materials with a spill-proof lid.
- Simple Operation: Single-button control for heating and display functions.
Included Components:
- SmrtMugg GO v2 Heated Coffee Mug
- Lid
- Magnetic Charging Cord
- Instruction Manual (this document)
- SmrtMugg Sticker
Image: The SmrtMugg GO v2, its packaging, and the magnetic USB charging cable.
Image: Key features of the SmrtMugg GO v2, including the LCD screen, long battery life, large capacity, magnetic USB, and spill-proof lid.
Setup
- Unpack: Carefully remove all components from the packaging.
- Initial Cleaning: Before first use, hand wash the mug and lid with warm, soapy water. Rinse thoroughly and dry completely. Do not immerse the mug's base in water.
- Initial Charge: Fully charge the SmrtMugg GO v2 using the provided magnetic charging cord. Refer to the "Charging" section for detailed instructions.
Charging
The SmrtMugg GO v2 features a convenient magnetic charging system.
- Connect the Cable: Attach the magnetic end of the charging cord to the charging port located at the bottom of the mug. The magnet will snap it into place.
- Power Source: Plug the USB end of the charging cord into a compatible USB power adapter (not included) or a powered USB port.
- Charging Indicator: The charging indicator on the mug's display will blink while charging. It will remain solid once fully charged.
- Charging While Heating: The mug can be used to heat beverages while charging. Note that charging may be slower when the heating function is active.
Video: Demonstration of the magnetic charging process and how the SmrtMugg GO v2 keeps beverages warm throughout the day.
Operation
The SmrtMugg GO v2 features a single button for all primary functions.
- Power On/Off:
- To turn ON: Press and hold the power button for 2 seconds. The display will illuminate, and the mug will begin heating to 131°F (55°C).
- To turn OFF: Press and hold the power button for 2 seconds. The display will turn off, indicating the mug is in sleep mode.
- Check Temperature:
- Tap the power button once to display the current temperature in Celsius.
- Tap the power button again to display the current temperature in Fahrenheit.
- Check Battery Level:
- Tap the power button a third time to display the remaining battery life.
The mug is designed to quickly cool overly hot beverages to the optimal 131°F (55°C) and then maintain that temperature.
Image: Detailed instructions for operating the SmrtMugg GO v2, including power, temperature display (Fahrenheit and Celsius), and battery level checks.
Cleaning and Maintenance
Proper cleaning and maintenance will ensure the longevity and performance of your SmrtMugg GO v2.
- Hand Wash Only: The mug and lid should be hand washed with warm, soapy water.
- Do Not Microwave: Never place the mug in a microwave oven.
- Avoid Immersion: Do not immerse the entire mug, especially the base with the charging port and electronics, in water.
- Drying: Ensure the mug and lid are completely dry before reassembling or charging.
- Lid Care: Regularly clean the lid, paying attention to seals and drinking spout, to prevent residue buildup.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mug not heating. | Low battery or not powered on. | Ensure the mug is fully charged. Press and hold the power button for 2 seconds to turn on. |
| Mug not charging. | Improper cable connection or faulty power source. | Verify the magnetic charging cable is securely attached. Try a different USB power adapter or port. |
| Temperature display is off. | Mug is off or in sleep mode. | Press and hold the power button for 2 seconds to turn on. Tap the button to cycle through display modes. |
| Beverage not staying warm for 90 minutes. | Initial beverage temperature too low or high, or battery not fully charged. | Ensure the mug is fully charged. The mug is designed to maintain 131°F (55°C), not to heat cold liquids from scratch. |
Usage Scenarios
The SmrtMugg GO v2 is designed for versatility, keeping your beverage warm in various settings.
Image: The SmrtMugg GO v2 keeping a beverage warm while working at a desk.
Image: Enjoying a warm drink from the SmrtMugg GO v2 during outdoor activities.
Image: The SmrtMugg GO v2 fitting perfectly in a car cup holder for travel.
Specifications
| Feature | Detail |
|---|---|
| Brand | SmrtMugg |
| Model Number | SmrtMugg Go v2 |
| Capacity | 13.5 Fluid Ounces |
| Material | Plastic, Stainless Steel (Insulated, BPA-free) |
| Color | Black |
| Product Dimensions | 3.25"W x 7.75"H |
| Item Weight | 1.18 pounds |
| Power Source | Battery Powered (3 Lithium Ion batteries included) |
| Care Instructions | Hand Wash Only, Do Not Microwave |
| UPC | 610452399715 |
Warranty and Support
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official SmrtMugg website. Keep your proof of purchase for any warranty claims.
For additional resources and product information, you may visit the SmrtMugg Store on Amazon.