FRONTECH SW-0163

FRONTECH Spark Series 60 Watt Tower Speaker

Instruction Manual

Brand: FRONTECH | Model: SW-0163

1. Introduction

Thank you for purchasing the FRONTECH Spark Series 60 Watt Tower Speaker (Model: SW-0163). This powerful audio system is designed to deliver immersive sound with versatile connectivity options, including Bluetooth 5.0, USB, AUX, and a wired microphone for karaoke. Please read this manual carefully before operating the device to ensure proper use, optimal performance, and safety.

2. Safety Information

To prevent fire, electric shock, or product damage, please observe the following safety precautions:

3. Package Contents

Please check that all items listed below are included in your package:

4. Product Overview

Familiarize yourself with the components and controls of your FRONTECH Spark Tower Speaker.

FRONTECH Spark Series 60 Watt Tower Speaker with included microphone and remote control.

Figure 4.1: Front view of the FRONTECH Spark Tower Speaker, showing the main unit, wired microphone, and remote control.

Detailed view of the control panel on the FRONTECH Spark Tower Speaker, highlighting USB port, AUX input, mode button, play/pause, next/previous track buttons, volume knob, and wired mic input.

Figure 4.2: Close-up of the speaker's control panel, detailing the LED digital display, USB port, AUX input, mode selection, playback controls, volume knob, and microphone input.

Rear view of the FRONTECH Spark Tower Speaker, showing the FM signal wire, power cord input, and ON/OFF switch.

Figure 4.3: Rear panel of the speaker, illustrating the FM signal wire connection, power cord input, and the main ON/OFF switch.

Front Panel Controls:

Rear Panel Controls:

5. Setup

  1. Placement: Place the tower speaker on a flat, stable surface. Ensure there is adequate space around the speaker for ventilation.
  2. Power Connection: Connect the power cord to the power input on the rear of the speaker, then plug the other end into a standard wall outlet.
  3. Power On: Flip the ON/OFF switch on the rear panel to the "ON" position. The LED digital display on the front will light up.
  4. FM Antenna (Optional): For better FM radio reception, extend the FM signal wire located at the back of the speaker.
  5. Microphone Connection (Optional): If using the karaoke function, plug the wired microphone into the "MIC" input on the front panel.

6. Operating Instructions

6.1. Power On/Off

6.2. Mode Selection

Press the "MODE" button on the front panel or the remote control to cycle through the available input modes: Bluetooth (BT), AUX, FM, and USB.

6.3. Bluetooth Pairing

Diagram showing a smartphone connecting via Bluetooth to the FRONTECH Spark Tower Speaker.

Figure 6.1: Illustration of Bluetooth 5.0 connectivity between a smartphone and the speaker.

  1. Turn on the speaker and select "BT" mode using the "MODE" button. The LED display will show "BT" and a pairing indicator may flash.
  2. Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
  3. Search for available devices. You should find "FRONTECH SPARK" or a similar name in the list.
  4. Select "FRONTECH SPARK" to pair. Once connected, the speaker will emit a confirmation sound, and the "BT" indicator on the display will become steady.
  5. You can now play audio from your device through the speaker.

6.4. USB Playback

  1. Insert a USB flash drive containing MP3 audio files into the USB port on the front panel.
  2. The speaker will automatically switch to "USB" mode and begin playing the audio files. If not, press the "MODE" button to select "USB" mode.
  3. Use the Play/Pause, Previous, and Next buttons on the speaker or remote to control playback.

6.5. AUX Input

  1. Connect one end of the included audio cable (3.5mm jack) to the AUX input on the front panel of the speaker.
  2. Connect the other end of the audio cable to the headphone jack or audio output of your external device (e.g., computer, DVD player, MP3 player).
  3. Press the "MODE" button to select "AUX" mode.
  4. Play audio from your external device.

6.6. FM Radio

  1. Extend the FM signal wire on the rear of the speaker for optimal reception.
  2. Press the "MODE" button to select "FM" mode.
  3. Press and hold the Play/Pause button to initiate an automatic scan for FM stations. The speaker will save all found stations.
  4. Use the Previous/Next buttons to navigate through the saved FM stations.

6.7. Karaoke Function

A person singing into a wired microphone connected to the FRONTECH Spark Tower Speaker, illustrating the karaoke feature.

Figure 6.2: The FRONTECH Spark Tower Speaker's karaoke function in use with the wired microphone.

  1. Plug the wired microphone into the "MIC" input on the front panel.
  2. Play music through any of the available input modes (Bluetooth, USB, AUX).
  3. Adjust the master volume using the volume control knob. The microphone volume is integrated with the main volume.
  4. Sing along with your favorite tunes.

7. Maintenance

8. Troubleshooting

ProblemPossible CauseSolution
No powerPower cord not connected; Power switch off; Power outlet faulty.Ensure power cord is securely plugged in; Turn ON the power switch on the rear panel; Try a different power outlet.
No soundVolume too low; Incorrect input mode selected; Audio cable not connected properly (AUX mode); Device volume too low.Increase volume; Press MODE button to select correct input; Check audio cable connections; Increase volume on connected device.
Bluetooth not connectingSpeaker not in BT mode; Bluetooth on device is off; Device too far; Already connected to another device.Select BT mode; Enable Bluetooth on your device; Move device closer to speaker; Disconnect from other devices and try pairing again.
USB playback not workingUSB drive not inserted correctly; USB drive corrupted; Unsupported file format.Re-insert USB drive; Try a different USB drive; Ensure files are in MP3 format.
Microphone not workingMicrophone not plugged in; Volume too low.Ensure microphone is fully plugged into the MIC input; Increase the master volume.

9. Specifications

FeatureDetail
Model NameSpark- (60W) / SW-0163
Output Power (RMS)60 Watts
Speaker TypeTower
Subwoofer Diameter5.25 Inches
Frequency Response40Hz - 20KHz
Wireless TechnologyBluetooth 5.1
ConnectivityBluetooth, USB, AUX
Special FeaturesBass Boost, Built-in Microphone (wired mic included), Hi-Res Audio, USB Port, LED Digital Display
Product Dimensions (D x W x H)25D x 13.5W x 60.2H Centimeters
Item Weight7.5 kg (7500 Grams)
Power SourceCorded Electric
Country of OriginChina

10. Warranty and Support

Your FRONTECH Spark Series Tower Speaker comes with a Limited Warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, service, or warranty claims, please contact FRONTECH customer service. You can also visit the official FRONTECH store for more information and product updates:

Visit the FRONTECH Store on Amazon.in

Manufacturer: Ecocentre, Unit-801, EM-4, Sector - V, Kolkata, West Bengal, 700283, Frontech Limited