Introduction
Welcome to the world of Tamagotchi Nano x Hello Kitty! This compact virtual pet device allows you to raise and nurture your very own Tamagotchi character with the charming assistance of Hello Kitty. This manual provides essential information on setting up, operating, and maintaining your device to ensure a happy and healthy virtual companion.
Product Overview

Image: Front view of the Tamagotchi Nano x Hello Kitty device in Sky Blue, featuring the screen and control buttons.
The Tamagotchi Nano x Hello Kitty features a sky blue shell with a special design. It includes a small LCD screen for interacting with your virtual pet and three control buttons for navigation and actions.
Setup
Follow these steps to begin your Tamagotchi adventure:
- Activate the Device: Locate the small plastic tab protruding from the side or back of the device. Gently pull this tab out to activate the pre-installed LR44 batteries. The screen should light up.
- Set the Time: Once activated, the device will prompt you to set the current time. Use the control buttons (typically A for selection, B for confirmation, C for cancel/back) to adjust the hour and minute. Confirm your selection to proceed.

Image: Front view of the Tamagotchi Nano x Hello Kitty device, showing the screen and buttons, ready for initial setup.
Operating Your Tamagotchi
Your Tamagotchi Nano x Hello Kitty is controlled using three primary buttons located at the bottom of the device. These buttons allow you to navigate menus and interact with your pet.
Basic Controls
- Button A (Left): Used to select options or scroll through menus.
- Button B (Middle): Used to confirm a selection or perform an action.
- Button C (Right): Used to cancel an action or go back to the previous screen.
Feeding Your Pet
Keep your Tamagotchi character happy and healthy by feeding it. Hello Kitty will assist in providing your pet's favorite treats: apple pie or milk. Access the feeding menu and select the appropriate item when your pet indicates hunger.
Playing Games
Engage your Tamagotchi character with fun mini-games. This version includes three interactive games: the Piano game, the Balloon game, and the Apple game. Playing games helps increase your pet's happiness and can influence its growth.
Cleaning
Maintain a clean environment for your Tamagotchi. If Joey makes a mess, Hello Kitty will help clean the room or remove Joey's footprints. Regularly check for and address any messes to keep your pet content.
Attention/Discipline
Your Tamagotchi character will occasionally require attention. Respond promptly to its calls to prevent it from becoming sad. Consistent care and attention are crucial for its well-being.
Health
Monitor your pet's health status through the device's display. Ensure it is well-fed, clean, and happy to maintain optimal health.
Lights
The device's screen is an LCD display. There are no specific light settings to adjust; the screen operates with its default illumination.
Character Evolution
Your Tamagotchi character will evolve through different stages: from an egg to a baby, and then to an adult. The way you care for your pet will determine which of the 7 possible adult characters it will become. This Hello Kitty version introduces 2 new adult characters. If you provide excellent care, your Tamagotchi character may even embark on a journey to London with Hello Kitty!
Maintenance
Battery Replacement
The Tamagotchi Nano x Hello Kitty requires 2 LR44 batteries, which are included with the device. When the batteries run low, the screen may dim or the device may stop functioning. To replace them:
- Locate the battery compartment on the back of the device.
- Use a small screwdriver to open the compartment.
- Remove the old batteries and insert two new LR44 batteries, ensuring correct polarity.
- Securely close the battery compartment.

Image: Back view of the Tamagotchi Nano x Hello Kitty device, showing the battery compartment and a small screw.
Troubleshooting
- Pet Runs Away: If your Tamagotchi character is sad for too long due to neglect (e.g., not being fed or cleaned), it may run away from home. Consistent care is essential.
- Device Reset: If the device malfunctions or you wish to restart your game, locate the small reset button on the back of the device (often recessed). Use a thin, pointed object (like a paperclip) to press the reset button.
Specifications
- Model Number: T10876
- Product Dimensions: 0.98"L x 1.18"W x 1.57"H
- Item Weight: 1.76 ounces
- Power Source: Battery Powered (2 LR44 batteries included)
- Controller Type: Button Control
- Display Type: LCD
- Material: ABS, Metal, Polycarbonate, Silicone
- Age Range: 8 years and up
- Number of Players: 1
What's in the Box
- 1 x Tamagotchi Nano x Hello Kitty - Sky Blue device
- 2 x LR44 Batteries (pre-installed)
Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
Official Product Video
Video: Product Overview of the Tamagotchi Nano x Hello Kitty device, demonstrating its features and gameplay.
Warranty and Support
Specific warranty information is not provided in the product details. For any warranty claims, technical support, or further inquiries, please refer to the manufacturer's official website or contact their customer support directly.





