1. Overview
The Jura Cool Control 0.6L is an essential accessory designed to complement your Jura automatic coffee machine. It ensures that milk is kept at an optimal temperature of 39°F (4°C), providing the perfect conditions for preparing a variety of specialty coffees with milk and milk foam. Its elegant, compact design allows for convenient placement in any kitchen environment, ensuring fresh, cold milk is always readily available for your beverages.
Figure 1: Jura Cool Control 0.6L Milk Cooler, Black.
2. Setup
2.1 Unpacking and Initial Inspection
- Carefully remove all components from the packaging.
- Verify that all parts are present: the Cool Control unit, stainless steel milk container, metal tube, adapter, and power cable.
- Inspect all components for any signs of damage. Do not use the device if any damage is observed.
2.2 Placement
Place the Cool Control unit on a stable, level surface near your Jura automatic coffee machine. Ensure there is adequate ventilation around the unit.
Figure 2: Jura Cool Control positioned next to a Jura coffee machine.
2.3 Initial Cleaning
Before first use, clean all parts that come into contact with milk:
- Remove the stainless steel milk container, metal tube, and adapter.
- Wash these components thoroughly with warm soapy water or place them in a dishwasher.
- Rinse and dry completely before reassembly.
2.4 Power Connection
Connect the power cable to the Cool Control unit and then plug it into a suitable power outlet (100 Volts, 25 Watts).
2.5 Filling with Milk
- Open the lid of the Cool Control unit.
- Pour fresh, cold milk into the stainless steel container. Do not exceed the 'MAX' fill line.
- Close the lid securely.
Figure 3: Filling the milk container of the Jura Cool Control.
2.6 Connecting to the Coffee Machine
- Attach the metal tube to the milk outlet on your Jura coffee machine.
- Insert the other end of the metal tube, with the adapter, into the designated opening on the Cool Control unit's lid.
- Ensure a secure connection to prevent leaks and ensure proper milk flow.
3. Operation
3.1 Powering On/Off
Press the power button on the top of the Cool Control unit to turn it on or off. The digital display will illuminate when the unit is active.
Figure 4: Digital display showing milk temperature and power button.
3.2 Temperature Control
The integrated Peltier cooling element automatically maintains the milk temperature at 39°F (4°C). The digital display shows the current temperature, ensuring optimal freshness for your milk.
3.3 Milk Level Indicator
The Cool Control features a wireless communication system with compatible Jura coffee machines. An integrated level indicator will alert you when the milk container needs to be refilled, ensuring uninterrupted preparation of milk-based beverages.
3.4 Preparing Milk-Based Drinks
Once the Cool Control is set up and connected, your Jura coffee machine will draw milk directly from the unit for preparing drinks like cappuccinos, lattes, and flat whites. Refer to your specific Jura coffee machine's instruction manual for detailed steps on preparing milk-based beverages.
4. Maintenance
4.1 Daily Cleaning
For optimal hygiene and performance, clean the milk system daily:
- Empty any remaining milk from the stainless steel container.
- Remove the stainless steel milk container, metal tube, and adapter.
- These parts are dishwasher-safe. Alternatively, wash them by hand with warm soapy water and rinse thoroughly.
- Ensure all components are completely dry before reassembling them into the Cool Control unit.
4.2 Exterior Cleaning
Wipe the exterior of the Cool Control unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Milk is not cold enough. | Unit not powered on; poor ventilation; ambient temperature too high. | Ensure unit is powered on. Check for obstructions around ventilation slots. Move unit to a cooler location if necessary. |
| Milk is not being drawn by the coffee machine. | Milk tube is blocked or improperly connected; milk container empty; adapter not correctly seated. | Check milk tube for kinks or blockages and ensure secure connections. Refill milk container. Ensure adapter is correctly inserted into the lid. |
| Milk level indicator not working. | Wireless communication issue; sensor malfunction. | Ensure the Cool Control is within range and properly communicating with the coffee machine. Check the milk container is correctly placed on the weight sensor. If issues persist, contact Jura support. |
| Unit does not turn on. | Power cable not connected; power outlet issue. | Check power cable connection to both the unit and the wall outlet. Test the outlet with another device. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Jura |
| Model Name | Cool Control |
| Model Number | 24283 |
| Color | Black |
| Capacity | 0.6 Liters |
| Material | Plastic, Stainless Steel |
| Product Dimensions (W x H) | 4.6"W x 6.8"H |
| Item Weight | 4.5 Pounds |
| Voltage | 100 Volts |
| Wattage | 25 Watts |
| Special Feature | Compact Design |
| Product Care Instructions | Dishwasher Safe (removable parts) |
| UPC | 794151412439 |
7. Warranty & Support
For warranty information, product registration, or technical support, please refer to the official Jura website or contact Jura customer service directly. Keep your purchase receipt and product model number (24283) handy for any inquiries.