1. Introduction
Thank you for choosing the ESGAMING 700W Non-Modular ATX Power Supply. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new power supply unit (PSU). Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Information
WARNING: Hazardous voltage inside. Do not remove the cover. Refer servicing to qualified personnel only.
- Ensure the power supply is disconnected from the main power outlet before installation or maintenance.
- This product is designed for use with desktop computers. Do not use it for any other purpose.
- Do not operate the power supply in high humidity or extreme temperature environments.
- Avoid blocking the ventilation openings of the power supply.
- Do not attempt to repair the unit yourself. Contact qualified service personnel for assistance.
- Ensure proper grounding to prevent electrical shock.
3. Package Contents
Verify that all items are present in your package:
- ESGAMING 700W Non-Modular ATX Power Supply
- AC Power Cord
- Mounting Screws (typically 4)
Image: ESGAMING 700W Power Supply with its non-modular cables and the included AC power cord and mounting screws.
4. Product Overview
The ESGAMING 700W Non-Modular ATX Power Supply is designed to provide stable and reliable power to your desktop computer components. It features a non-modular design with pre-installed cables for improved system airflow and heat dissipation.
Key Features:
- 700W Output Wattage: Provides ample power for various desktop configurations.
- Non-Modular Design: All cables are pre-attached, simplifying installation.
- 120mm Ultra Quiet Cooling Fan: Features an auto-thermally controlled 120mm fan for efficient and silent cooling.
- Global Voltage Support: Supports 115V/220V input voltage via a manual switch.
- Comprehensive Safety Protections: Includes Short-Circuit (SCP), Over-Current (OCP), Over-Voltage (OVP), Over-Power (OPP), Under-Voltage (UVP), and Over-Temperature (OTP) Protections.
- Flat Black Cables: Designed for neat cable management.
Image: Top-down view of the ESGAMING 700W Power Supply, highlighting the 120mm cooling fan and the product label with specifications.
Image: Diagram illustrating the dimensions (160mm x 150mm x 86mm) and various protection features (OVP, OPP, UVP, OCP, SCP, OTP) of the ESGAMING ES-700W PSU.
5. Setup and Installation
Follow these steps to install your ESGAMING 700W Power Supply:
- Prepare Your System: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case.
- Remove Old PSU (if applicable): Disconnect all cables from your old power supply. Unscrew and remove the old PSU from the case.
- Install New PSU: Carefully place the ESGAMING 700W PSU into the designated PSU bay in your computer case. Secure it with the provided mounting screws.
- Set Input Voltage: Locate the red voltage selector switch on the rear of the PSU. Ensure this switch is set to the correct voltage for your region (115V for North America, 220V for Europe/Asia). Incorrect setting can damage the PSU and other components.
Image: Rear view of the ESGAMING 700W Power Supply, showing the AC power input, power switch, and the red 115V/230V voltage selector switch.
- Connect Cables: Connect the non-modular cables to your motherboard and other components. Refer to your motherboard and component manuals for specific connection points.
- Main Power: 1 x 24-pin ATX connector.
- CPU Power: 1 x 4+4-pin CPU 12V connector.
- PCI-E Power: 2 x 6+2-pin PCI-E connectors for graphics cards.
- SATA Power: 4 x SATA connectors for SSDs, HDDs, and optical drives.
- PATA Power: 4 x PATA (Molex) connectors for older peripherals.
- FDD Power: 1 x FDD connector.
Image: Diagram illustrating the types and quantities of non-modular cables included with the ESGAMING 700W Power Supply, such as 24-pin ATX, 4+4-pin CPU, 6+2-pin PCIe, SATA, PATA, and FDD connectors.
- Cable Management: Route cables neatly to improve airflow and aesthetics.
- Close Case: Once all connections are secure, close your computer case.
- Connect AC Power: Plug the AC power cord into the PSU and then into a wall outlet.
6. Operating Instructions
After successful installation, operating your power supply is straightforward:
- Power On: Ensure the voltage selector switch is correctly set. Flip the main power switch on the rear of the PSU to the 'I' (On) position.
- System Boot: Press the power button on your computer case to start your system.
- Power Off: To shut down your system, use the operating system's shutdown function. For a complete power cut, flip the main power switch on the PSU to the 'O' (Off) position and unplug the AC cord.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your power supply:
- Dust Cleaning: Periodically clean the exterior of the PSU and its fan grille to prevent dust buildup, which can hinder cooling. Use compressed air to gently clear dust from the fan and vents. Ensure the PSU is unplugged before cleaning.
- Cable Inspection: Occasionally check all cable connections to ensure they are secure and free from damage.
- Environment: Operate the PSU in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
Image: Close-up top view of the ESGAMING 700W Power Supply's 120mm cooling fan, showing the protective grille.
8. Troubleshooting
If you encounter issues with your power supply, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Computer does not power on. | PSU power switch is off. AC power cord is loose or unplugged. Incorrect voltage setting. Faulty PSU or component. | Ensure PSU switch is 'I' (On). Check AC power cord connection to PSU and wall outlet. Verify voltage selector switch (115V/220V) is correct for your region. Test with another known good PSU if possible. |
| Computer powers on but shuts down unexpectedly. | Overload or overheating. Loose cable connections. Faulty PSU. | Ensure adequate ventilation. Check for dust buildup. Reduce system load if possible. Verify all power cables are securely connected. If issues persist, the PSU may be faulty. |
| Fan is noisy or not spinning. | Dust buildup. Fan obstruction. Faulty fan. | Clean the fan and grille with compressed air (PSU unplugged). Ensure no cables or debris are obstructing the fan. If the fan is faulty, contact support. |
If these steps do not resolve your issue, please contact ESGAMING customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Name | 700W Non-Modular |
| Brand | ESGAMING |
| Compatible Devices | Desktop |
| Output Wattage | 700 Watts |
| Form Factor | ATX |
| Cooling Method | Air (120mm fan) |
| Power Supply Design | Non-Modular |
| Maximum Input Voltage | 230 Volts |
| Minimum Input Voltage | 110 Volts |
| System Bus Connector Type | 24 Pin |
| Item Dimensions (L x W x H) | 5.91 x 5.51 x 3.15 inches (150 x 140 x 80 mm approx.) |
| Protections | SCP, OCP, OVP, OPP, UVP, OTP |
10. Warranty and Support
This ESGAMING 700W Non-Modular ATX Power Supply comes with a 12-month manufacturer's warranty from the date of purchase.
For warranty claims, technical support, or any questions regarding your product, please contact ESGAMING customer service through the retailer where you purchased the product or visit the official ESGAMING website for contact information.
Please retain your proof of purchase for warranty validation.