BANDAI HG Gawain 1/35 Scale Model Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your BANDAI HG Gawain 1/35 Scale Model Kit. Please read all instructions carefully before beginning assembly to ensure proper construction and enjoyment of your model.

Close-up view of the assembled BANDAI HG Gawain model kit, showcasing its black and gold color scheme with red accents.

Image 1.1: Front close-up of the Gawain model, highlighting its detailed finish.

2. Safety Information

Please observe the following safety precautions:

Keep small parts away from children under 3 years of age to prevent choking hazards.
Use appropriate tools (e.g., hobby knife, nippers) with caution. Adult supervision is recommended for younger builders.
Avoid inhaling plastic dust during sanding or cutting. Work in a well-ventilated area.
Do not apply excessive force to parts, as this may cause breakage.

3. Package Contents

Verify that all components are present before starting assembly. The kit includes:

Gawain model kit plastic runners
Instruction manual
Slash Haken weapon parts
Action Base
Open hand set
Jewel Seals (for Hadron Cannon)

All components of the BANDAI HG Gawain model kit laid out, including the main model, action base, open hand parts, and Slash Haken accessories.

Image 3.1: Overview of included parts and accessories.

4. Setup and Assembly

Follow the numbered steps in the included assembly guide. Use nippers to carefully remove parts from the runners. Smooth any nubs with a hobby knife or sanding stick.

4.1. Body Assembly

Begin by assembling the torso, head, and main body sections. Pay close attention to the orientation of parts.

4.2. Arm and Leg Assembly

Assemble the arms and legs, ensuring all joints are correctly aligned for full articulation. The Gawain features a wide range of motion for dynamic posing.

4.3. Hadron Cannon and Jewel Seals

Attach the Hadron Cannon extrusion parts. Apply the Jewel Seals to replicate the distinctive appearance of the Hadron Cannon.

4.4. Slash Haken and Action Base

Assemble the Slash Haken weapon. The included action base allows for aerial and dynamic poses. Attach the model securely to the action base post.

Four-panel image demonstrating the articulation of the Gawain model's head and shoulder armor, showing how parts can be moved and rotated.

Image 4.1: Articulation points for head and shoulder components.

5. Operating and Posing

The HG Gawain model is designed with extensive articulation to recreate various scenes from the series. Utilize the action base for enhanced display options.

Dynamic Posing: Carefully adjust the joints in the arms, legs, and torso to achieve desired poses.
Slash Haken Deployment: The Slash Haken can be posed in its extended configuration, as shown in the image below.
Action Base Use: Secure the model to the action base for stable aerial or action poses. Adjust the angle and height of the base as needed.

The assembled Gawain model kit in a dynamic pose, with its multiple Slash Haken weapons extended forward, simulating an attack.

Image 5.1: Gawain model demonstrating Slash Haken deployment.

The Gawain model kit in a wide, balanced stance with arms outstretched, showcasing its articulation and imposing presence.

Image 5.2: Gawain model in a dynamic action pose.

6. Maintenance

Proper care will preserve the appearance and integrity of your model kit.

Cleaning: Use a soft, dry cloth or a soft brush to gently remove dust. Avoid harsh chemicals or abrasive materials.
Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
Joint Care: If joints become loose over time, a thin layer of clear topcoat or hobby cement (applied carefully to the ball joint, allowed to dry, then reassembled) can help restore tightness.

7. Troubleshooting

Refer to these common issues and solutions:

Issue	Possible Cause	Solution
Parts do not fit together	Excess plastic nubs; incorrect orientation	Carefully trim nubs; re-check assembly guide for correct part orientation.
Joints are too loose	Wear and tear; manufacturing tolerance	Apply a thin layer of clear topcoat or hobby cement to the ball joint and allow to dry before reassembly.
Model falls off action base	Improper attachment; unbalanced pose	Ensure the model is securely attached to the base post; adjust the model's center of gravity.

8. Specifications

Brand: BANDAI
Model Name: Gawain
Scale: 1/35
Material: Plastic
Color: Black, Gold, Red accents
Special Features: Gloss Injection, Real Metallic Gloss Injection, Specialized Action Base/Opener Set
Included Components: Action Base, Open hand set, Slash Haken
Item Weight: Approximately 1.61 pounds (0.73 kg)
Package Dimensions: 15.67 x 12.32 x 3.66 inches (39.8 x 31.3 x 9.3 cm)

Full front view of the assembled BANDAI HG Gawain model kit, standing upright and showcasing its complete design.

Image 8.1: Front view of the completed Gawain model.

Full back view of the assembled BANDAI HG Gawain model kit, highlighting the intricate details of its rear armor and wing-like structures.

Image 8.2: Back view of the completed Gawain model.

9. Warranty and Support

For product support, missing parts, or warranty inquiries, please contact BANDAI customer service. Refer to the contact information provided on the product packaging or the official BANDAI website for your region.

BANDAI Official Website: www.bandai.com

BANDAI Gawain