Ambimall 64-inch Floor Lamp Instruction Manual

Introduction

Thank you for choosing the Ambimall 64-inch Floor Lamp. This manual provides detailed instructions for the safe and efficient use of your new lamp. Please read it thoroughly before assembly and operation, and retain it for future reference.

Important Safety Instructions

• Ensure the power supply voltage matches the lamp's requirements (120 Volts).
• Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support.
• Unplug the lamp from the outlet before cleaning or replacing the bulb.
• Do not use the lamp in wet locations or near water. This product is for indoor use only and is not waterproof.
• Keep the lamp away from heat sources and direct sunlight.
• Ensure the lamp is assembled correctly and stable before use to prevent tipping.
• Use only the specified bulb type (E26 base, 9W LED) to avoid overheating or damage.

Package Contents

Please check the package for the following items:

• Lamp Pole Sections (multiple, screw-together)
• Lamp Base
• Lampshade (Beige, Round)
• 9W LED Bulb (E26 base)
• Remote Control
• User Manual

Setup Instructions

Assembly of your Ambimall Floor Lamp is straightforward and requires no additional tools.

1. Assemble the Lamp Pole: Carefully screw the individual lamp pole sections together clockwise until they are securely connected. Ensure all connections are tight to maintain stability.
2. Attach the Base: Securely attach the assembled lamp pole to the round lamp base by screwing it clockwise. The base is weighted for stability.
3. Install the Lampshade: The lampshade typically comes rolled. Unroll it and attach it to the shade rings provided. The shade is secured by clips and a Velcro strip along the seam. Ensure the seam is properly aligned and secured.
4. Insert the Bulb: Screw the provided 9W LED bulb into the E26 socket located at the top of the lamp pole. Do not overtighten.
5. Connect to Power: Plug the lamp's power cord into a standard 120V electrical outlet.

Operating Instructions

Your Ambimall Floor Lamp offers versatile control options for brightness and color temperature.

Powering On/Off

• Foot Switch: Press the circular foot switch located on the power cord to turn the lamp on or off.
• Remote Control: Use the power button (⏻) on the remote control to turn the lamp on or off.

Remote Control Functions

The included remote control provides full functionality for your lamp. The remote is magnetic and can be conveniently attached to the lamp pole to prevent misplacement.

• Brightness Adjustment: Use the brightness buttons (☀+ / ☀-) to steplessly adjust the light intensity from 30% to 100%.
• Color Temperature Adjustment: Use the color temperature buttons (K+ / K-) to change the light color from 3000K (warm white) to 6000K (cool white).
• 1-Hour Timer: Press the 1H button to activate a 1-hour timer, after which the lamp will automatically turn off. This feature is ideal for sleep aid.
• Preset Modes: The remote includes several preset modes for different activities:
  • Reading Mode: Provides optimal lighting for reading.
  • Working Mode: Offers bright, cool light suitable for tasks.
  • Night Light Mode: Dims the light to a soft glow for nighttime use.
  • Baby Feeding Mode: Provides a gentle, warm light for nursery environments.
• Memory Function: The lamp features a memory function that recalls your last brightness and color temperature settings when turned back on.

Maintenance

Cleaning

Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe the lamp pole and base. For the lampshade, a soft, slightly damp cloth can be used if necessary, but avoid excessive moisture. Do not use abrasive cleaners or solvents.

Bulb Replacement

If the included LED bulb needs replacement, ensure the lamp is unplugged. Allow the bulb to cool completely before attempting to remove it. Replace with an E26 base LED bulb, not exceeding 9W. Using a bulb with higher wattage may damage the lamp or pose a fire hazard.

Troubleshooting

• Lamp does not turn on:
  • Check if the power cord is securely plugged into a working outlet.
  • Ensure the bulb is correctly screwed into the socket.
  • Verify the bulb is not burnt out. Replace if necessary.
  • If using the remote, ensure the remote has working batteries and is within range (up to 32ft).
• Remote control not responding:
  • Check and replace the remote control batteries.
  • Ensure there are no obstructions between the remote and the lamp's receiver.
  • Confirm the remote is paired with the lamp (refer to specific pairing instructions if provided with the remote, though typically not required for this type of lamp).
• Light flickers or dims unexpectedly:
  • Check for loose bulb connections.
  • Ensure the power outlet is stable and not overloaded.
  • The bulb may be nearing the end of its lifespan. Consider replacing it.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Ambimall customer service directly. Keep your purchase receipt as proof of purchase.