LeLuv Thrusting Rabbit Vibrator Turbo Bunny

LeLuv Thrusting Rabbit Vibrator Turbo Bunny Instruction Manual

Model: Turbo Bunny (B0CZLMZCCM)

Introduction

The LeLuv Thrusting Rabbit Vibrator Turbo Bunny is designed to provide dual-action stimulation. It features a thrusting shaft and a butterfly stimulator, offering 6 rotation speeds and 30 vibration patterns. This device is battery-powered for portability and made from body-safe, hypoallergenic TPR material.

LeLuv Thrusting Rabbit Vibrator Turbo Bunny in purple

Image: LeLuv Thrusting Rabbit Vibrator Turbo Bunny, purple color variant.

Safety Information

  • Material Safety: This product is made from phthalate-free, hypoallergenic TPR.
  • Cleaning: Clean the device thoroughly before and after each use with warm water and a mild, toy-safe soap or specialized toy cleaner.
  • Lubrication: For optimal comfort and to protect the material, use only water-based lubricants. Oil-based lubricants can damage TPR materials.
  • Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.
  • Battery Safety: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Insert batteries with correct polarity. Remove batteries if the device will not be used for an extended period.

Product Components

The LeLuv Thrusting Rabbit Vibrator Turbo Bunny consists of the following main parts:

  • Main Body
  • Thrusting Shaft
  • Butterfly Stimulator
  • Control Panel
  • Battery Compartment (located at the base)

Setup: Battery Installation

The device requires 4 AAA batteries (not included).

  1. Twist the cap at the base of the device counter-clockwise to open.
  2. Remove the battery tray.
  3. Insert 4 AAA batteries into the tray, ensuring the positive (+) and negative (-) ends match the indicators. Ensure the springs are facing upwards towards the positive end of the battery.
  4. Insert the battery tray back into the device.
  5. Replace the cap by twisting it clockwise until secure.
Image showing how to insert batteries into the LeLuv Thrusting Rabbit Vibrator Turbo Bunny

Image: Detailed steps for inserting 4 AAA batteries into the device's base.

Operating Instructions

The LeLuv Turbo Bunny features a 5-button control panel for easy operation.

Control panel of the LeLuv Thrusting Rabbit Vibrator Turbo Bunny with labeled buttons

Image: Control panel with buttons for rotation, vibration, and reverse shaft rotation.

  • Power On/Off: Press and hold the central 'R/S' button to turn the device on or off.
  • Adjusting Rotation: Use the 'ROTATION' up and down arrow buttons to cycle through 6 different thrusting speeds.
  • Reversible Shaft Rotation: Press the 'R/S' button briefly to reverse the direction of the thrusting shaft.
  • Adjusting Vibration: Use the 'VIBRATION' up and down arrow buttons to cycle through 30 different vibration patterns for the butterfly stimulator.
LeLuv Thrusting Rabbit Vibrator Turbo Bunny highlighting 6 rotation modes, 6 vibration modes, and dual stimulation motors

Image: Overview of the device's 6 rotation modes, 30 vibration patterns, and dual stimulation capabilities.

Maintenance

  • Cleaning: After each use, wash the device with warm water and a mild, antibacterial soap or a dedicated toy cleaner. Rinse thoroughly.
  • Drying: Pat dry with a lint-free cloth or allow to air dry completely before storage.
  • Storage: Store in a clean, dry, and dust-free environment. Keep away from direct sunlight and extreme temperatures. It is recommended to store the device in its original packaging or a dedicated storage bag to protect the material.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Batteries are dead or incorrectly inserted.Replace with fresh AAA batteries. Ensure batteries are inserted with correct polarity.
Weak or inconsistent performance.Low battery power.Replace all 4 AAA batteries with new ones.
Device is too loud.Motor noise is inherent to battery-operated devices.Ensure the battery cap is securely fastened. Some motor noise is normal for this type of device.

Specifications

  • Product Dimensions: 8.5 x 1 x 1 inches (21.6 x 2.5 x 2.5 cm)
  • Weight: 9 ounces (255 grams)
  • Material: Hypoallergenic, Phthalate-Free TPR
  • Power Source: 4 x AAA Batteries (not included)
  • Rotation Speeds: 6
  • Vibration Patterns: 30
  • Features: Reversible shaft rotation, dual stimulation motors
Diagram showing the dimensions of the LeLuv Thrusting Rabbit Vibrator Turbo Bunny

Image: Dimensional diagram of the LeLuv Thrusting Rabbit Vibrator Turbo Bunny, showing overall length, insertable length, and diameter.

Warranty and Support

LeLuv provides a 90-day warranty and a money-back guarantee for this product. For any questions, concerns, or warranty claims, please contact LeLuv customer support through the retailer where the product was purchased or visit the official LeLuv website for contact information.

Manufacturer: LeLuv

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.