ACMEROTA Replacement Filters for NPET WF160, WF040, WF120 Cat Water Fountains

Introduction

This manual provides instructions for the ACMEROTA replacement filters designed for NPET WF160, WF040, and WF120 cat water fountains. These filters are engineered with a multi-filtration system to ensure your pet has access to clean, fresh, and healthy drinking water.

The filtration system incorporates high-density cotton, coconut shell activated carbon, and ion exchange resin to effectively remove impurities, soften water, and eliminate odors.

Compatibility

These replacement filters are specifically compatible with the following NPET cat water fountain models:

NPET WF160
NPET WF040
NPET WF120

Please verify your water dispenser's model number before purchasing to ensure proper fit and function.

ACMEROTA filters compatible with NPET WF160, WF040, WF120 cat water fountains — Image: Illustration of ACMEROTA filters showing compatibility with NPET WF160, WF040, and WF120 cat water fountains.

Product Components

Each package typically includes:

4 Filter Cartridges (round multi-filter elements)
4 Blue Sponges (round sponge filters)
4 Square Sponges
1 Cleaning Brush

Components of the ACMEROTA filter pack, including filter cartridges, sponges, and cleaning brush — Image: A visual representation of the filter components, highlighting the multi-layer filtration system with activated carbon, ion exchange resin, and filter cotton.

Specifications

Attribute	Detail
Product Name	Replacement Filter for Cat Fountain
Brand	ACMEROTA
Model Number	HD-AC-123
Material	Filter Cotton, Coconut Shell Activated Carbon, Ion Exchange Resin
Quantity	4 pieces (Filter Cartridges, Blue Sponges, Square Sponges)
Filter Cartridge Diameter	105 mm (4.13 inches)
Blue Sponge Diameter	105 mm (4.13 inches)
Square Sponge Dimensions (L x W x H)	55 mm x 46 mm x 17 mm (2.16 x 1.81 x 0.66 inches)
Product Dimensions (L x W x H)	2 x 10 x 0.2 cm
Product Weight	70 grams
External Test Certification	NSF

Detailed dimensions of the round filter sponge and multi-filter element — Image: Diagram showing the precise dimensions of the round filter sponge and the multi-filter element.

Setup and Installation

Preparation: Before initial use, thoroughly rinse the filter sponge and filter cartridge with water to remove any surface dust or loose carbon particles. After rinsing, soak the filter elements in water for five minutes. This helps activate the carbon and ensures optimal filtration.

Image: Visual guide demonstrating the rinsing process for the filter before installation.
Placement: When installing the filter cartridge into your pet water fountain, ensure the flat side of the filter is facing upwards.
Secure: Place the blue sponge filter and square sponge filter in their designated slots within the fountain, typically around the pump, to catch larger debris.

Maintenance and Replacement

Water Change and Cleaning: It is recommended to change the water in the fountain and clean the entire unit every two to three days to maintain hygiene and optimal performance.
Filter Replacement Frequency: The filter elements should be replaced regularly to ensure continuous clean water for your pet. The recommended replacement schedule is:
- Every one to two weeks in summer.
- Every two to three weeks in winter.
This frequency may vary depending on the number of pets, water quality, and frequency of fountain use.
Easy Replacement: The filters are designed for easy removal and replacement, facilitating regular maintenance of your pet's water fountain.

ACMEROTA HD-AC-123