BNVE Keyless Entry Car Alarm System with Remote Start and Push Engine Start Stop Ignition Button Kit User Manual

1. Product Overview

1.1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your BNVE Keyless Entry Car Alarm System with Remote Start and Push Engine Start Stop Ignition. This system enhances vehicle security and convenience by offering remote engine start, keyless entry, and push-button ignition functionalities. Please read this manual thoroughly before installation and use to ensure proper function and safety.

1.2. Key Features

• Remote Engine Start: Pre-warm or pre-cool your vehicle from a distance.
• Keyless Entry: Automatically locks when you move away and unlocks when you approach the vehicle.
• Push Engine Start/Stop: Convenient ignition control without a traditional key.
• Intelligent Hand Brake Detection: Ensures safe remote start operation.
• Oil Pump Start Detection: Monitors engine readiness for starting.
• Remote Trunk Release: Open your vehicle's rear trunk remotely.
• Remote Car Search: Locate your vehicle in parking areas.

1.3. Package Contents

The BNVE Keyless Entry Car Alarm System package typically includes the following components:

• Main Control Unit
• Remote Controls (Key Fobs)
• Push Engine Start/Stop Button
• Wiring Harnesses
• Shock Sensor
• Antennas (PKE, Alarm, Loop)
• Relays
• Reset Switch
• RFID Card (for some models)

Image 1: Overview of BNVE Keyless Entry Car Alarm System components, including the main control unit, two remote key fobs, a push-button start/stop, various wiring harnesses, and a shock sensor.

2. Installation and Setup

2.1. Important Installation Note

Installation of this system requires a certain technical basis and familiarity with vehicle electrical systems. It is strongly recommended to seek installation services from qualified professionals to ensure correct wiring and prevent damage to your vehicle or the system. Incorrect installation can lead to system malfunction or vehicle damage.

2.2. Pre-Installation Checklist

• Confirm your vehicle operates on a 12V electrical system.
• Obtain your vehicle's wiring diagram.
• Ensure all components listed in Section 1.3 are present.
• Disconnect the negative (black) battery terminal before beginning any wiring.

2.3. PKE Antenna Installation Guidelines

Proper placement of the Passive Keyless Entry (PKE) antennas is crucial for optimal performance. Consult your vehicle's specific layout for ideal hidden locations that do not obstruct signals.

3. Operating Instructions

3.1. Remote Control Functions

Your system comes with remote key fobs for convenient control of various vehicle functions.

• Lock/Arm: Press the lock button once to lock the doors and arm the alarm system.
• Unlock/Disarm: Press the unlock button once to unlock the doors and disarm the alarm system.
• Remote Engine Start/Stop: Press and hold the remote start button (often indicated by a circular arrow or similar icon) for approximately 3 seconds to remotely start or stop the engine.
• Remote Trunk Release: Press the trunk release button (often indicated by a trunk icon) to open the rear tail box.
• Car Search: Press the car search button (often indicated by a horn or speaker icon) to activate the vehicle's horn and lights for location.

3.2. Passive Keyless Entry (PKE)

The PKE feature allows for automatic locking and unlocking of your vehicle without pressing buttons on the remote. When you approach the car within 1-3 meters with the key fob, the doors will automatically unlock. When you walk away for 2-3 meters, the doors will automatically lock.

3.3. Push Engine Start/Stop Button

1. To Start the Engine: Ensure the vehicle is in Park (P) or Neutral (N). Press the foot brake, then press the "ENGINE START STOP" button once. The engine will ignite.
2. To Stop the Engine: With the vehicle stationary, press the foot brake, then press the "ENGINE START STOP" button once. The engine will turn off.
3. Accessory Mode: Without pressing the foot brake, press the "ENGINE START STOP" button once for accessory power (ACC).
4. Ignition ON Mode: Without pressing the foot brake, press the "ENGINE START STOP" button a second time for ignition ON.
5. Turn OFF: Press the "ENGINE START STOP" button a third time to turn off all power.

3.4. Smartphone Control (If Applicable)

Some versions of this system may offer smartphone application control for locking, unlocking, and remote starting your vehicle. Refer to the specific app instructions for pairing and usage.

3.5. Climate Control with Remote Start

To effectively use the remote start for pre-warming or pre-cooling, ensure your vehicle's climate control system is set to the desired temperature and fan speed before exiting the vehicle. The system will activate these settings upon remote start.

4. Maintenance

4.1. Remote Control Battery Replacement

The remote controls are powered by 2 CR2 batteries (included). If the remote's range decreases or it becomes unresponsive, replace the batteries. Refer to the remote control's specific instructions for battery replacement procedures.

4.2. System Care

• Keep the main control unit and wiring away from excessive moisture and extreme temperatures.
• Avoid dropping or subjecting remote controls to physical shock.
• Regularly check wiring connections for any signs of wear or corrosion, especially after vehicle maintenance.

5. Troubleshooting

If you experience issues with your BNVE Keyless Entry Car Alarm System, consider the following common troubleshooting steps:

• System Unresponsive: Check the remote control batteries. Ensure the vehicle's main battery is charged.
• Remote Start Failure: Verify the vehicle is in Park/Neutral and the hand brake is engaged (if required by installation). Check for any open doors or hood.
• Keyless Entry Not Working: Ensure the key fob is within the specified range (1-3 meters for unlock, 2-3 meters for lock). Check for signal interference.
• Engine Not Starting with Push Button: Ensure the foot brake is pressed firmly. Check if the vehicle's immobilizer system (if any) is bypassed correctly.
• Battery Drain: If experiencing unusual battery drain, consult a professional installer to verify correct wiring and system configuration.

For complex issues or persistent problems, it is recommended to contact a professional installer or the manufacturer's support.

6. Product Specifications

7. Warranty Information

This BNVE Keyless Entry Car Alarm System comes with a 1-YEAR warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

8. Customer Support

For technical assistance, troubleshooting guidance, or warranty inquiries, please contact your retailer or the manufacturer directly. Ensure you have your product model number (B0CZHD3T5R) and proof of purchase available when contacting support.