GOATMOOD Stainless Steel Food Grinder Attachment MFG-SS-01 Instruction Manual

Introduction

Thank you for choosing the GOATMOOD Stainless Steel Food Grinder Attachment. This manual provides essential information for the safe and efficient use of your new attachment. Please read these instructions carefully before first use and retain them for future reference. This attachment is designed for use with KitchenAid Stand Mixers.

Image: The GOATMOOD Stainless Steel Food Grinder Attachment, including the main grinder body, food tray, and various accessories, attached to a red stand mixer.

Safety Instructions

• Always ensure the stand mixer is turned off and unplugged before attaching or detaching the grinder.
• Keep fingers and utensils away from the feed opening and grinding plates during operation. Use the food pusher provided.
• Do not attempt to grind bones, nuts, or other hard items that could damage the attachment or mixer.
• Ensure all parts are correctly assembled and secured before operating.
• This attachment is designed for household use. Avoid continuous operation for extended periods to prevent overheating.
• Keep out of reach of children.

Setup and Assembly

Follow these steps to assemble your food grinder attachment:

Image: Visual instructions for assembling the food grinder attachment.

1. Insert Grind Worm: Place the grind worm (auger) into the grinder body.
2. Install Blade: Position the cutting blade with the sharp edge facing outward.
3. Place Grinding Plate: Select the desired grinding plate and place it over the blade.
4. Secure Locking Ring: Turn the locking ring until it is secured but not overtightened.
5. Place Tray: Insert the food tray into the top of the grinder body.
6. Attach to Mixer: Attach the assembled grinder to the power hub of your KitchenAid stand mixer and secure it with the thumb screw.

Tip: For best results when grinding meat, pre-chill the grinder attachment in the refrigerator or freezer for 10-15 minutes before use. This helps maintain a cold grinding temperature for a cleaner grind.

Operating Instructions

Grinding Meat and Other Foods

This attachment includes 3 cutting blades and 4 grinding plates of various sizes to achieve different textures for meat, fruits, vegetables, hard cheeses, and breadcrumbs.

Image: Different grinding plates and blades, showing examples of fine, medium, and coarse ground meat.

1. Prepare your ingredients by cutting them into pieces that fit easily into the feed opening.
2. Ensure the stand mixer is set to a low to medium speed (typically speed 4-6 for grinding).
3. Feed ingredients into the hopper using the food pusher. Never use your fingers or other utensils.
4. Collect the ground food in a bowl placed under the grinder outlet.

Note: This attachment is designed for light to medium duty grinding. Avoid processing large quantities of very tough or fibrous ingredients continuously, as this may strain the mixer motor.

Making Sausages

The attachment includes 3 sausage filler tubes for making various types of sausages.

Image: The sausage stuffer attachment in use, demonstrating the creation of sausages.

1. After grinding your meat, replace the grinding plate and blade with the desired sausage stuffing tube.
2. Place the sausage casing onto the stuffing tube.
3. Feed the seasoned ground meat mixture into the grinder, allowing it to fill the casing.
4. Control the speed and pressure to ensure even filling and avoid air pockets.

Making Kubbe

Use the included kubbe attachment to form traditional Middle Eastern kubbe shells.

Image: The kubbe attachment in use, showing the formation of kubbe shells and finished kubbe.

1. Assemble the kubbe attachment according to its specific instructions (usually replacing the grinding plate and blade).
2. Feed the prepared kubbe dough mixture into the grinder.
3. The attachment will form hollow shells, ready for filling.

Cleaning and Maintenance

Proper cleaning ensures the longevity and hygiene of your food grinder attachment.

Image: Components of the GOATMOOD food grinder attachment shown with water, highlighting their dishwasher-safe nature.

• Disassembly: Turn off and unplug the stand mixer. Disassemble the grinder attachment by reversing the assembly steps.
• Cleaning: All stainless steel parts are dishwasher safe (top rack recommended). For hand washing, use warm, soapy water and the included cleaning brush to remove any food residue. The mirror-polished surface facilitates easy cleaning.
• Drying: Ensure all parts are thoroughly dried before storage to prevent water spots or corrosion.
• Storage: Store the clean, dry attachment and its accessories in a safe place.

Troubleshooting

• Meat not grinding properly / Forced through plate:

  Ensure the cutting blade is installed with the sharp edge facing outward towards the grinding plate. Check that the locking ring is tightened sufficiently to hold the plate and blade firmly in place, but not excessively tight to prevent jamming. Ensure meat is cut into appropriate sizes and is sufficiently chilled.
• Locking ring jams:

  If the locking ring becomes difficult to remove, ensure the attachment is completely cool. Try gently tapping the ring with a rubber mallet or the handle of a wooden spoon to loosen it. Avoid overtightening during assembly.

• Attachment not fitting mixer:

  Verify that your stand mixer is a KitchenAid model. This attachment is designed to fit all KitchenAid stand mixers. Ensure the attachment shaft is fully inserted into the power hub and the thumb screw is tightened.

Specifications

Warranty and Support

Specific warranty details for the GOATMOOD Stainless Steel Food Grinder Attachment MFG-SS-01 are not provided in the available product information. Please refer to the product packaging or contact GOATMOOD directly for warranty information and customer support.

For further assistance or inquiries, please visit the official GOATMOOD store or contact their customer service department.

GOATMOOD Store: https://www.amazon.com/stores/GOATMOOD/page/9EB8364E-2EA3-44D7-BB3F-E2D76A1C3972

Video Resources

No official product videos from the seller were found in the provided data. For visual guides on assembly or operation, please refer to the included images and written instructions.