Introduction
The MFUZOP 12V 100Ah LiFePO4 Battery is a high-performance, deep-cycle lithium iron phosphate battery crafted from premium LiFePO4 cells. It boasts a 1.28kWh energy density, ensuring stable performance, enhanced power, and exceptional quality. Perfect for solar homes, RVs, camping, trolling motors, and off-grid systems, it offers hassle-free maintenance.
A view of the MFUZOP 12V 100Ah LiFePO4 Battery, highlighting its compact design and integrated handle.
Important Safety Information
Adhering to these safety guidelines is crucial for preventing damage to the battery and ensuring user safety.
- Do not short-circuit the positive and negative poles.
- Do not modify or disassemble the battery without authorization.
- Do not throw the battery into fire or water.
- Always use a standard charger that matches the output voltage requirements of lithium batteries.
- This 12V 100Ah Group 31 battery is specifically tailored for energy storage applications and is not suitable for vehicle starting or powering golf carts.
Diagram illustrating the multiple security protections provided by the built-in BMS, including overcharge, over-discharge, overvoltage, overcurrent, overload, short circuit, and temperature protection.
Product Features
- LiFePO4 Technology: Crafted from premium Lithium Iron Phosphate (LiFePO4) cells, this battery offers a 1.28kWh energy density, ensuring stable performance and exceptional quality.
- Lightweight and Portable: Weighing a mere 23.4 pounds, its lightweight design and high energy density ensure effortless portability, reducing weight pressure during installation. It is approximately 50% lighter than lead-acid batteries of similar capacity.
- High Efficiency & Scalable: Our 12V 100Ah LiFePO4 lithium batteries can be connected in parallel or series—supporting up to 4S for a maximum voltage of 48V (51.2V) and up to 4P for a maximum capacity of 400Ah. Thanks to their no memory effect design, these batteries deliver consistent performance cycle after cycle.
- Stable BMS Protection: The built-in Battery Management System (BMS) provides thorough safety by shielding against high temperature, overvoltage, overload, overcharge, overdischarge, overcurrent, and short circuits, ensuring safe operation.
- Long Lifespan: With 15,000+ cycles and advanced lithium battery technology, it promises stability and a 10-year lifespan.
An exploded view of the MFUZOP LiFePO4 battery, showing the internal cell structure and the integrated Smart BMS.
A comparison chart highlighting the advantages of MFUZOP LiFePO4 batteries over traditional flooded batteries, such as longer life, lighter design, greater security, higher energy density, faster charging, wider application range, lower self-discharge, lower maintenance, and better performance stability.
Setup and Installation
Before connecting the battery, ensure all components are compatible and that you have the correct tools. Always disconnect power sources before making connections.
Terminal Connections
The battery features M8 terminal bolts for secure connections. Ensure all connections are tight to prevent resistance and overheating.
Image showing the dimensions of the MFUZOP 12V 100Ah LiFePO4 battery and a detailed view of the M8 terminal bolts.
This video demonstrates the process of connecting the MFUZOP 12V 100Ah LiFePO4 battery to a power system, including securing the terminal connections and verifying the charge with a battery monitor.
Operating Instructions
This battery is designed for deep cycle applications. Ensure your connected devices are within the battery's operational parameters.
Charging
Always use a standard charger specifically designed for lithium batteries that matches the output voltage of the MFUZOP 12V 100Ah LiFePO4 Battery.
Discharge
The battery supports excellent continuous discharge and can operate effectively across a wide temperature range, from -4°F to 150°F.
An image demonstrating the battery's ability to cope with extreme temperature variations, showing effective continuous discharge from -4°F to 150°F.
A collage of images showcasing various applications for the MFUZOP LiFePO4 battery, including yachts, solar energy systems, camping, and RV trips.
The MFUZOP LiFePO4 battery positioned inside an RV, illustrating its suitability for mobile power solutions.
The MFUZOP LiFePO4 battery and an inverter set up in a camping environment, demonstrating its use for outdoor adventures.
Maintenance Guidelines
MFUZOP LiFePO4 batteries are designed for low maintenance, but following these simple guidelines will help ensure optimal performance and longevity.
- Regularly inspect the battery terminals for any signs of corrosion and ensure they are securely fastened.
- Keep the battery clean and dry. Wipe down the exterior with a clean, damp cloth as needed.
- Avoid exposing the battery to extreme temperatures outside its specified operating range for prolonged periods.
- If storing the battery for an extended period, ensure it has a partial charge (e.g., 50%) and store it in a cool, dry place.
Troubleshooting Common Issues
The built-in BMS is designed to protect the battery from various faults. If you encounter an issue, refer to the table below. If the battery enters a protected state, disconnect the load and charger, wait a few minutes, and then reconnect. If issues persist, contact customer support.
| Issue | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Incorrect charger, loose connections, BMS protection activated (e.g., over-temperature) | Verify charger compatibility, check all connections, allow battery to cool if overheated. |
| No power output | Over-discharge, short circuit, BMS protection activated (e.g., overcurrent) | Recharge battery, check for short circuits in the system, reset BMS (if applicable, by disconnecting load). |
| Battery indicator shows low capacity | Actual low charge, battery monitor calibration issue | Fully charge the battery. If using an external monitor, recalibrate it according to its instructions. |
Product Specifications
| Attribute | Value |
|---|---|
| Brand | MFUZOP |
| Model | 12V 100Ah LiFePO4 Battery |
| Nominal Capacity | 100Ah |
| Energy Density | 1.28kWh |
| Item Weight | 26.4 pounds |
| Product Dimensions | 6.69 x 12.99 x 8.46 inches |
| Max Charge Current | 50 Amps |
| Max Discharge Current | 120 Amps |
| Cycle Life | 15000+ cycles |
| Operating Temperature (Discharge) | -20°C to 65°C (-4°F to 150°F) |
| Terminal Type | Stud Terminal (M8) |
Warranty and Customer Support
MFUZOP provides a 5-year warranty for this battery, covering quality issues from the date of purchase.
For any inquiries, technical assistance, or support, please contact MFUZOP customer service. We are committed to providing prompt feedback within 24 hours.
Visit the official MFUZOP Store for more information and products: MFUZOP Store.