1. Introduction
Thank you for choosing the FITUEYES Floor TV Stand with Mount. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new TV stand. Please read this manual thoroughly before beginning assembly and retain it for future reference.
Image 1.1: The FITUEYES Floor TV Stand with Mount, featuring a black finish and a single shelf, supporting a television.
2. Safety Information
WARNING: Failure to read and follow these instructions can result in serious personal injury or damage to property. If you have any questions, please contact customer support.
- Ensure all parts are present and undamaged before assembly. Do not use damaged parts.
- Do not exceed the maximum weight capacity of 110 lbs (50 kg) for the TV stand.
- This stand is designed for TVs between 32 and 65 inches. Verify your TV's VESA pattern is compatible (100x100mm to 400x400mm).
- Assembly requires at least two people for safety, especially when mounting the TV.
- Keep children and pets away during assembly. Small parts can be a choking hazard.
- Place the stand on a stable, level surface to prevent tipping.
- Utilize the provided "Safety Lock" mechanism to secure the TV to the mount and prevent accidental dropping.
3. Package Contents
Please verify that all components listed below are included in your package. If any parts are missing or damaged, contact FITUEYES customer service immediately.
Hardware and Tools (Illustrative)
- A: Base Plate
- B: Support Column
- C: TV Mounting Bracket (Left)
- D: TV Mounting Bracket (Right)
- E: Shelf
- F: Shelf Support Brackets
- G: Cable Management Clips
- H: Safety Lock Screws
- Various screws, washers, and spacers for TV mounting (M4, M6, M8)
- Hex key / Allen wrench
- Open-end wrench
Note: A detailed parts list with quantities and diagrams is typically included in the physical manual. This list is a general representation.
4. Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have a second person assist with TV mounting.
Step 1: Assemble the Base and Support Column
- Attach the support column (B) to the base plate (A) using the provided screws. Ensure the column is securely fastened and aligned.
- Install the environmental foot pads on the underside of the base plate to protect your floor surface.
Image 4.1: Detail of the sturdy base with protective foot pads and integrated wire management.
Step 2: Attach the Shelf
- Slide the shelf support brackets (F) onto the support column (B) at your desired height.
- Secure the shelf (E) onto the support brackets using the designated screws.
Image 4.2: Illustration of the adjustable shelf and TV mount height.
Step 3: Prepare the TV for Mounting
- Carefully place your TV face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
- Attach the TV mounting brackets (C and D) to the back of your TV. Ensure they are level and securely tightened.
Image 4.3: VESA compatibility chart for TVs ranging from 32 to 65 inches.
Step 4: Mount the TV to the Stand
- With assistance, carefully lift the TV and hook the mounting brackets onto the main support column's TV plate.
- Ensure the TV is centered and level.
- Install the safety lock screws (H) at the bottom of the TV mounting brackets to prevent the TV from accidentally lifting off the stand.
Image 4.4: Detail of the sturdy safety TV lock mechanism.
5. Operating Instructions
Height Adjustment
The TV stand offers height adjustment for optimal viewing. To adjust the TV height:
- For TV Mount Height: Loosen the screws securing the TV mounting plate to the support column. Adjust the plate to the desired height and re-tighten all screws securely.
- For Shelf Height: Loosen the screws on the shelf support brackets. Slide the shelf to the desired position and re-tighten the screws.
Image 5.1: The TV stand offers multiple height adjustment levels for both the TV and the media shelf.
Swivel Function
The TV mount allows for a swivel motion of up to ±30 degrees. Gently push the TV to the left or right to achieve your desired viewing angle. No tools are required for this adjustment.
Image 5.2: The TV stand allows for a ±30 degree swivel for flexible viewing angles.
Cable Management
Utilize the integrated cable management channel within the support column to organize and conceal TV and device cables. This helps maintain a tidy appearance and prevents cable clutter.
Image 5.3: The stand features a dedicated channel for effective cable management.
6. Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Weight Distribution: Ensure that the weight on the shelf is evenly distributed and does not exceed its capacity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level | Mounting brackets unevenly installed or stand not on a level surface. | Re-check bracket installation on TV. Ensure stand is on a flat, level floor. |
| Stand feels wobbly | Screws are loose, or TV weight exceeds capacity. | Tighten all assembly screws. Verify TV weight is within the 110 lbs limit. |
| Difficulty adjusting height | Screws not sufficiently loosened. | Ensure all relevant screws for height adjustment are loosened before attempting to move the TV or shelf. |
| Cables are not staying organized | Cables are too thick or not properly routed. | Route cables carefully through the designated channel. Use additional cable ties if needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FITUEYES |
| Model Number | B0CZ6F1GDW |
| Compatible TV Sizes | 32 - 65 inches |
| VESA Compatibility | 100x100mm to 400x400mm |
| Maximum TV Weight Capacity | 110 lbs (50 kg) |
| Material | Iron (Base and Column) |
| Movement Type | Swivel (±30 degrees) |
| Height Adjustment | Adjustable TV mount and shelf height |
| Color | Black |
| Item Weight | 29.2 pounds (approx.) |
| Package Dimensions | 34.04 x 18.08 x 5 inches (approx.) |
9. Warranty & Support
FITUEYES products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official FITUEYES website.
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact FITUEYES customer support:
- Website: www.fitueyes.com (Example URL, please verify actual support contact information)
- Email: support@fitueyes.com (Example email, please verify actual support contact information)
- Phone: Refer to your product packaging or website for regional contact numbers.
Please have your model number (B0CZ6F1GDW) and purchase date ready when contacting support.