TengXcel Electric Pruning Shears User Manual

1. Safety Instructions

Always read and understand all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

General Safety Warnings:

• Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Electrical Safety: Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Personal Safety: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep hands and body parts away from the cutting blades.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed.
• Battery Tool Use and Care: Use the tool only with specified battery packs. Ensure the battery is securely attached before operation.

Specific Pruning Shears Safety:

• Blade Sharpness: The blades are extremely sharp. Handle with care to prevent accidental cuts.
• Safety Lock: The tool is equipped with an integrated safety lock mechanism. Press the trigger twice until you hear two beeps to activate. Always engage the safety lock when not in use or when changing blades.
• Cutting Capacity: Do not attempt to cut branches exceeding the maximum cutting diameter of 2.4 inches (60mm).
• Maintenance: Disconnect the battery pack before making any adjustments, changing accessories, or storing the power tool.

2. Product Overview

The TengXcel Electric Pruning Shears are designed for efficient and effortless gardening and tree trimming. This cordless pruner is compatible with Makita LXT 18V Li-ion batteries, offering portability and ease of use for various outdoor tasks.

Figure 2.1: Electric Pruning Shears and included accessories (sandpaper stone, wrenches).

Key Features:

• Battery Compatibility: Seamlessly integrates with all Makita LXT 18V lithium-ion batteries (sold separately).
• Dynamic Brushless Motor: Powered by a 200W motor, reaching 26,000 RPM for optimal efficiency and powerful kinetic energy.
• Premium Titanium SK5 High Carbon Steel Blades: Effortlessly slices through branches up to 60mm (2.40 inches) in diameter, ensuring clean and accurate cuts.
• LCD Display: Provides real-time information on the number of cutting processes performed and the remaining power.
• Safety Lock: Minimizes the risk of unintended switch activation.

Figure 2.2: Main components of the Electric Pruning Shears.

3. Setup

Before first use, ensure all components are present and in good condition. The battery is NOT included and must be purchased separately.

3.1 Battery Installation

1. Ensure the pruning shears are powered off and the safety lock is engaged.
2. Align the Makita LXT 18V Li-ion battery with the battery slot at the base of the pruner handle.
3. Slide the battery into the slot until it clicks securely into place.

Figure 3.1: Proper battery insertion for the pruning shears.

3.2 Initial Inspection

• Check the blades for any visible damage or debris.
• Ensure all screws and fasteners are tight.

4. Operating Instructions

Follow these steps for safe and effective operation of your electric pruning shears.

4.1 Powering On/Off

1. With the battery installed, press the power switch located on the side of the tool.
2. To activate the blades, quickly pull the trigger switch twice until you hear two beeps. The LCD display will show the battery level and cutting count.
3. To turn off the tool, long press the trigger switch until the blades close and the tool powers down.

Figure 4.1: How to use the cordless power electric pruning shears.

4.2 Cutting Technique

• Position the branch to be cut between the open blades. Ensure the branch diameter does not exceed 2.4 inches (60mm).
• Press the trigger switch firmly to close the blades and make the cut.
• Release the trigger to allow the blades to open for the next cut.
• The LCD display will update the cutting count with each successful cut.

Figure 4.2: Demonstrating the 2.4-inch cutting diameter.

4.3 Applications

These electric pruning shears are suitable for a wide range of gardening tasks, including:

• Trimming bushes and hedges.
• Pruning flowers and ornamental plants.
• Cutting branches of fruit trees and other trees.
• Cutting wires (within specified limits).

Figure 4.3: Wide application of the electric pruning shears.

4.4 Official Product Video

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your pruning shears.

5.1 Blade Cleaning and Lubrication

• After each use, disconnect the battery.
• Use a clean, dry cloth to wipe off any sap, debris, or moisture from the blades.
• Apply a few drops of light machine oil to the blades and pivot points to ensure smooth operation and prevent rust.

5.2 Blade Sharpening/Replacement

• If the blades become dull, use the included sandpaper stone to carefully sharpen the cutting edge.
• For blade replacement, refer to the detailed instructions in the full user manual or consult a qualified technician. Ensure the tool is powered off and the battery is removed before attempting blade replacement.

5.3 Storage

• Store the pruning shears in a dry, secure location, out of reach of children.
• Always remove the battery before storing the tool for extended periods.

6. Troubleshooting

If you encounter issues with your pruning shears, refer to the following common problems and solutions.

7. Specifications

Detailed technical specifications for the TengXcel Electric Pruning Shears.

8. Warranty & Support

TengXcel stands behind the quality of its products. For warranty information, technical support, or replacement parts, please contact our customer service team.

Contact Information:

Please refer to the contact details provided on the product packaging or the official TengXcel website for the most up-to-date support information.

Online Support: Visit the TengXcel official website for FAQs and support resources.

Email Support: [Placeholder for Email Address]

Phone Support: [Placeholder for Phone Number]