KAKO ULRC090A03

KAKO Gold Bar Cart Instruction Manual

Model: ULRC090A03

Introduction

Thank you for choosing the KAKO Gold Bar Cart. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar cart. Please read these instructions carefully before use and retain them for future reference.

Safety Information

To ensure safe operation and prevent damage, please observe the following safety guidelines:

  • Do not overload the shelves beyond their weight capacity of 66 lbs per layer.
  • Use caution when moving the cart on uneven surfaces to prevent tipping.
  • Keep fingers away from moving parts during assembly and use.
  • Ensure all screws are tightened securely during assembly.
  • Place the cart on a flat, stable surface.

Package Contents

Before assembly, verify that all components listed below are present and undamaged:

  • Gold Steel Frame components
  • 2 Mirrored Shelves (Toughened Glass)
  • 4 Casters (2 with brakes)
  • Wine Bottle Holders
  • Glass Holders
  • Assembly Hardware (screws, wrench)
  • Instruction Manual
KAKO Gold Bar Cart with all components assembled

Image: Fully assembled KAKO Gold Bar Cart, showcasing its two mirrored shelves, wine bottle holders, and glass holders.

Assembly Instructions

The KAKO Gold Bar Cart is designed for easy assembly. All necessary accessories and detailed instructions are included. Follow the steps below for proper setup:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts against the package contents list.
  2. Assemble Frame: Connect the gold steel frame components using the provided screws and tools. Ensure all connections are secure but do not overtighten initially.
  3. Install Shelves: Carefully place the toughened glass mirrored shelves into their designated positions within the frame. Ensure they sit flush and are stable. The protective fence on the bottom shelf should face upwards to prevent items from falling.
  4. Attach Casters: Screw the 4 rotating casters into the base of the cart. Ensure the 2 casters with brakes are positioned on the same side for easy locking.
  5. Install Wine and Glass Holders: Attach the wine bottle holders and glass holders to the underside of the top shelf as indicated in the detailed instructions.
  6. Final Tightening: Once all components are in place, go back and securely tighten all screws.
Close-up of KAKO Gold Bar Cart features including handle, protective fence, and wine rack

Image: Detailed view of the bar cart's handle, protective fence on the lower shelf, and integrated wine and glass holders.

KAKO Gold Bar Cart casters with 360 degree rotation and brakes

Image: Illustration of the 360° rotating casters, highlighting the two casters equipped with brakes for stability.

Operating Instructions

Your KAKO Gold Bar Cart is designed for versatile use and easy mobility.

  • Loading Capacity: Each shelf has a loading capacity of 66 lbs. Distribute weight evenly to maintain stability.
  • Mobility: The cart is equipped with 4pcs 360° rotating casters. To move the cart, simply push or pull it by the handle.
  • Locking Mechanism: Two of the casters have brakes. To secure the cart in place, press down on the brake levers. To release, lift the levers.
  • Storage: Utilize the two tiers for storing various items such as wine bottles, glasses, snacks, fruits, or small appliances. The built-in wine and glass holders can accommodate up to 9 glasses and 4 bottles of red wine.
Dimensions of the KAKO Gold Bar Cart: 15 inches deep, 33.8 inches wide, 35.2 inches high

Image: Diagram showing the dimensions of the bar cart: 15" (D) x 33.8" (W) x 35.2" (H), with 20.3" between shelves.

Maintenance

To keep your KAKO Gold Bar Cart in optimal condition, follow these simple maintenance guidelines:

  • Cleaning: Wipe the steel frame and mirrored shelves with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish or glass.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
  • Storage: Store the cart in a dry environment to prevent potential damage to the metal frame.

Troubleshooting

If you encounter any issues with your KAKO Gold Bar Cart, consider the following:

  • Cart is unstable: Ensure all screws are fully tightened. Check that the cart is on a flat, level surface. Engage the brakes on the casters if stationary.
  • Casters not rolling smoothly: Check for any debris or hair caught in the wheels. Ensure the brakes are disengaged.
  • Shelves appear loose: Verify that the shelves are correctly seated within the frame and that the frame itself is securely assembled.

For issues not resolved by these steps, please contact customer support.

Specifications

Model NumberULRC090A03
Product Dimensions (D x W x H)15" x 33.8" x 35.2"
MaterialAlloy Steel (Frame), Toughened Glass (Shelves)
Number of Shelves2
Maximum Weight Recommendation66 Pounds per shelf
Casters4 (360° rotating, 2 with brakes)
Included ComponentsBar cart with wheels, Glass Holders
Assembly RequiredYes
Product CareWipe with Dry Cloth

Warranty and Support

KAKO is dedicated to offering satisfactory service. If you have any questions or concerns about your Gold Bar Cart within 30 days of purchase, please contact us directly. We are committed to providing a satisfactory solution within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official KAKO website.

© 2026 KAKO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.