CRAFTSMAN CMXEVBE17155 10 Gallon 6.0 Peak HP Stainless Steel Wet/Dry Vac Instruction Manual

1. Introduction

Thank you for choosing the CRAFTSMAN CMXEVBE17155 10 Gallon 6.0 Peak HP Stainless Steel Wet/Dry Vac. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new wet/dry vacuum. Please read all instructions carefully before use and retain this manual for future reference.

This heavy-duty wet/dry vac is designed for powerful suction and durability, making it ideal for various cleaning tasks in garages, homes, renovations, and job sites. Its stainless steel drum ensures longevity, while the 6.0 peak horsepower motor delivers robust performance for both wet and dry messes.

Figure 1: CRAFTSMAN Wet/Dry Vacs - Overview of key features.

2. Important Safety Information

Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury. Read and understand all instructions before use.

• Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use to pick up toxic, carcinogenic, or other hazardous materials such as asbestos.
• Do not use without filters in place.

3. Package Contents

Your CRAFTSMAN Wet/Dry Vac comes with the following components:

• 10 Gallon 6.0 Peak HP Stainless Steel Wet/Dry Vac Unit
• 2-1/2-in. x 7-ft. Hose
• 2 Locking Extension Wands
• Utility Nozzle
• Car Nozzle
• Muffler/Diffuser
• Qwik Lock Filter (General Purpose)

Figure 2: Included Components and Accessories.

4. Setup

4.1 Assembly

Your wet/dry vac requires minimal assembly. Ensure all components listed in Section 3 are present before proceeding.

1. Attach Casters: Insert the four durable casters into the caster feet on the base of the drum until they click securely into place.
2. Attach Hose: Connect the 2-1/2-inch x 7-ft. hose to the intake port on the front of the drum for vacuuming. For blower function, connect it to the blowing port on the back.
3. Attach Extension Wands and Nozzles: Connect the locking extension wands to the hose for extended reach. Attach the desired nozzle (Utility or Car Nozzle) to the end of the extension wand or directly to the hose.
4. Accessory Storage: Utilize the on-board accessory storage slots on the caster feet and the top of the unit to keep your attachments organized.

Figure 3: Main components and features of the wet/dry vac.

4.2 Filter Installation (Dry Vacuuming)

The Qwik Lock Filter Fastening System allows for quick and easy filter changes.

1. Ensure the unit is unplugged.
2. Unlatch the side clips and remove the power head from the drum.
3. The Qwik Lock Filter should already be installed for dry vacuuming. If not, slide the filter over the filter cage until it rests against the power head. Secure it by twisting the Qwik Lock cap clockwise until it locks.
4. Replace the power head and secure the side clips.

4.3 Filter Installation (Wet Vacuuming)

For wet vacuuming, the Qwik Lock Filter must be removed and replaced with a foam wet filter (sold separately) or the filter cage should be left bare if using a compatible wet application filter.

1. Ensure the unit is unplugged.
2. Unlatch the side clips and remove the power head from the drum.
3. Twist the Qwik Lock cap counter-clockwise to unlock and remove the dry filter.
4. If using a foam wet filter, slide it over the filter cage. If using a compatible wet application filter, ensure it is correctly installed according to its instructions.
5. Replace the power head and secure the side clips.

5. Operating Instructions

5.1 Dry Vacuuming

Ensure the Qwik Lock Filter is correctly installed for dry use.

1. Connect the hose to the intake port on the front of the drum.
2. Attach desired extension wands and nozzle.
3. Plug the power cord into a suitable grounded outlet.
4. Turn the large on/off switch to the "ON" position.
5. Begin vacuuming dry debris.

5.2 Wet Vacuuming

Ensure the appropriate filter setup for wet use is in place (dry filter removed, foam wet filter installed or compatible wet application filter).

1. Connect the hose to the intake port on the front of the drum.
2. Attach desired extension wands and nozzle.
3. Plug the power cord into a suitable grounded outlet.
4. Turn the large on/off switch to the "ON" position.
5. Begin vacuuming liquids. The vacuum will automatically shut off when the liquid level reaches its maximum capacity.

5.3 Blower Function

Your wet/dry vac can also function as a powerful blower.

1. Ensure the unit is unplugged.
2. Remove the hose from the intake port.
3. Connect the hose to the blowing port located on the back of the power head.
4. Attach the muffler/diffuser to the blowing port for quieter operation and to diffuse the airstream.
5. Plug the power cord into a suitable grounded outlet.
6. Turn the large on/off switch to the "ON" position to use as a blower.

Figure 4: Location of the built-in blowing port and other features.

6. Maintenance

6.1 Filter Cleaning and Replacement

Regularly inspect and clean your filters to maintain optimal suction performance. Replace filters when they are worn or damaged.

• Dry Filter: Tap the filter gently to dislodge dust. For heavy dirt, wash with water and mild soap, rinse thoroughly, and allow to air dry completely before reinstallation.
• Foam Wet Filter: Rinse with water and mild soap. Allow to air dry completely before storing or using for wet vacuuming.
• Compatible Filters: CMXZVBE38751, CMXZVBE38753, CMXZVBE38754, CMXZVBE38773, CMXZVBE38755, CMXZVBE38776, CMXZVBE38777, CMXZVBE38778, and CMXZVBE38779 Genuine CRAFTSMAN Vac Filters.

Figure 5: CRAFTSMAN Filter Compatibility Chart.

6.2 Emptying the Tank

For liquids, use the extra-large drain plug at the bottom of the drum for quick and easy emptying. For dry debris, unlatch the side clips, remove the power head, and carefully empty the drum contents into a waste receptacle. Compatible dust bags (CMXZVBE39970) can be used for cleaner disposal of dry debris.

7. Troubleshooting

8. Specifications

• Brand: CRAFTSMAN
• Model Name: CMXEVBE17155
• Capacity: 10 Gallons
• Motor Horsepower: 6.0 Peak HP
• Hose Length: 7 ft (2.1 Meters)
• Hose Diameter: 2-1/2 inches
• Power Source: Corded Electric
• Special Feature: Portable
• Filter Type: Cartridge (Qwik Lock)
• Finish Type: Stainless Steel
• Color: Red
• Indoor/Outdoor Usage: Indoor

9. Warranty & Support

Your CRAFTSMAN CMXEVBE17155 Wet/Dry Vac is covered by a 3 Year Limited Warranty. For warranty claims, technical support, or to purchase genuine replacement parts and accessories, please refer to the contact information provided in your product packaging or visit the official CRAFTSMAN website.