Introduction
This manual provides instructions for the Marvel Legends Series Marvel’s Prowler 15-cm Action Figure, inspired by Spider-Man: The Animated Series. This collectible figure is designed for display and gentle play, featuring multiple points of articulation and character-specific accessories.
Image: Marvel Legends Series Marvel’s Prowler action figure, showcasing its detailed design, purple cape, green suit, and included accessories: a detachable mask and two alternate hands.
Safety Information
WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.
- This product contains small parts which may pose a choking hazard to young children.
- Recommended for ages 4 years and up.
- Keep all packaging materials away from children.
- Do not attempt to force articulation points beyond their intended range of motion to prevent damage.
Image: Back of the product packaging, displaying multi-language safety warnings, including the choking hazard notice for small parts.
What's in the Box
Your Marvel Legends Series Marvel’s Prowler action figure package includes the following components:
- 1x Marvel’s Prowler Action Figure
- 1x Detachable Face Mask
- 2x Alternate Hand Accessories (claws)
Image: The Marvel’s Prowler action figure displayed alongside its detachable mask and two interchangeable clawed hand accessories.
Setup
The Marvel’s Prowler action figure comes pre-assembled. No complex setup is required. Simply remove the figure and its accessories from the packaging.
Attaching/Detaching Accessories
- Face Mask: The face mask can be gently placed over the figure's head to cover the face, or removed to reveal the unmasked head sculpt. Align the mask carefully to avoid scratching the figure's paint.
- Hands: To change hands, gently pull the existing hand accessory straight out from the wrist joint. Then, align the peg of the desired alternate hand accessory with the hole in the wrist and push it in firmly until secure. Do not twist or apply excessive force.
Image: The Prowler figure holding its purple and black detachable mask in one hand, demonstrating the mask's separate nature.
Operating the Figure (Posing)
The Marvel’s Prowler action figure features over 20 points of articulation, allowing for a wide range of dynamic poses. Exercise care when posing to avoid damage.
- Joint Movement: Gently manipulate the joints at the neck, shoulders, elbows, wrists, torso, waist, hips, knees, and ankles to achieve desired poses.
- Cape: The cape is made of a flexible material and can be adjusted to complement various poses.
- Stability: For standing poses, ensure the figure's feet are flat on a stable surface. Adjust leg and ankle joints for balance.
Image: The Prowler action figure in a dynamic, masked pose, demonstrating its articulation and poseability.
Maintenance
- Cleaning: To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Joint Care: If joints become stiff, gently warm the area with a hairdryer on a low setting for a few seconds to loosen the plastic, then carefully move the joint. Do not overheat.
Troubleshooting
| Problem | Solution |
|---|---|
| Joints are stiff or difficult to move. | Gently warm the joint area with a hairdryer on a low setting for a few seconds to soften the plastic, then carefully articulate the joint. Do not apply excessive heat. |
| Accessories do not fit securely. | Ensure the accessory is correctly aligned with the corresponding peg or slot. Apply gentle, even pressure. Avoid forcing. If a peg is too loose, a small amount of clear nail polish or super glue on the peg (let it dry completely before reinserting) can add friction. |
| Figure falls over easily. | Adjust the figure's stance, ensuring feet are flat and weight is evenly distributed. Utilize the articulation in the ankles and knees for better balance. |
Specifications
- Model Number: F9083
- Product Dimensions: 5.91 x 5.91 x 5.91 inches (15 x 15 x 15 cm)
- Item Weight: 7.4 ounces (209.79 grams)
- Manufacturer: Hasbro
- Recommended Age: 4 years and up
- Articulation: Over 20 points of articulation
Image: The Marvel’s Prowler action figure displayed within its retro-style packaging, highlighting the product's presentation.
Warranty and Support
For information regarding warranty coverage or product support, please refer to the manufacturer's official website or contact their customer service department. Specific warranty details are typically provided with the product packaging or on the manufacturer's official channels.
Manufacturer: Hasbro