1. Introduction
This manual provides comprehensive instructions for the assembly, proper use, care, and maintenance of your Modway Cadence Oval Coffee Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference. The Cadence Coffee Table features an oval top, curved edges, and fluted details, designed to provide both surface area and open storage in a living room setting.
Image 1.1: The Modway Cadence Oval Coffee Table, showcasing its design and open storage.
Product Overview Video
Video 1.1: An official Modway product video demonstrating the features and appearance of the Cadence Coffee Table. This video provides a visual overview of the table's design, fluted details, open storage, and adjustable foot glides.
2. Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight recommendation of 70 pounds for the tabletop.
- Keep small parts and hardware away from children and pets during assembly.
- Use caution when moving the assembled table to avoid damage or injury.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Tabletop
- Bottom Shelf
- Legs (4)
- Fluted Side Panels (2)
- Hardware Pack (screws, dowels, adjustable foot glides, Allen wrench)
- Assembly Guide
4. Setup and Assembly Instructions
Assembly is recommended for two people. A screwdriver is required (not included).
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Identify each component using the parts list in the assembly guide.
- Attach Fluted Side Panels: Secure the fluted side panels to the tabletop using the provided hardware. Ensure the fluted design faces outwards.
- Install Legs: Attach the four legs to the tabletop and fluted side panels. Ensure they are oriented correctly and tighten all fasteners.
- Secure Bottom Shelf: Position the bottom shelf between the legs and secure it using the designated hardware. Ensure it is level and firmly attached.
- Attach Adjustable Foot Glides: Screw the adjustable non-marking foot glides into the bottom of each leg. These can be adjusted to level the table on uneven surfaces.
- Final Check: Once assembled, gently lift and place the table in its desired location. Verify that all connections are secure and the table is stable.
Image 4.1: Product dimensions for the Modway Cadence Oval Coffee Table.
Image 4.2: Detail of the fluted design on the table's side panel.
5. Operating Instructions
The Modway Cadence Oval Coffee Table is designed for indoor use in living room environments.
- Placement: Position the coffee table on a flat, stable surface. The adjustable foot glides can be used to compensate for minor unevenness in the floor.
- Open Storage: Utilize the integrated open storage shelf for organizing books, magazines, remote controls, or displaying decorative items.
- Weight Distribution: Distribute weight evenly across the tabletop and shelf to maintain stability and prevent stress on the structure.
Image 5.1: The coffee table's open storage area.
6. Maintenance
Proper care will extend the life and appearance of your coffee table.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean spills immediately to prevent staining or damage to the wood grain laminate.
- Protection: Use coasters under beverages and placemats under hot items to protect the tabletop surface.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Hardware: Periodically check and tighten all assembly hardware to ensure the table remains stable.
7. Troubleshooting
Refer to this section for solutions to common issues.
- Table is Unstable/Wobbly:
a. Ensure all screws and fasteners are fully tightened. Refer to Section 4 for assembly steps.
b. Adjust the non-marking foot glides on the bottom of each leg to level the table on uneven floors. - Surface Damage/Peeling:
a. This product features a wood grain laminate. Avoid sharp objects, excessive moisture, or harsh cleaning agents that can cause damage.
b. Follow the maintenance guidelines in Section 6 to protect the finish. - Missing Parts:
a. Carefully re-check all packaging materials to ensure no small parts were overlooked.
b. If parts are still missing, contact Modway customer support with your model number and a description of the missing components.
8. Specifications
| Brand | Modway |
| Model Name | Cadence |
| Model Number | EEI-6837 |
| Product Dimensions (L x W x H) | 45.3" x 18.5" x 16.7" |
| Item Weight | 35 pounds |
| Maximum Weight Recommendation | 70 pounds |
| Frame Material | Wood (Rubberwood, Particleboard, MDF) |
| Finish Type | Wooden Grain Laminate |
| Color | Black |
| Number of Shelves | 1 |
| Recommended Number of People for Assembly | 2 |
| Tools Recommended For Assembly | Screw Driver |
9. Warranty Information
The Modway Cadence Oval Coffee Table comes with a one-year warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10. Customer Support
For any questions, missing parts, or assistance with your Modway Cadence Oval Coffee Table, please contact Modway customer support. Refer to your purchase documentation or the Modway website for contact details.
