1. Introduction
This instruction manual provides comprehensive guidance for the installation, usage, and maintenance of GREEN PARTY Panel Clamps. These clamps are specifically designed to facilitate the expansion and secure connection of party tents, carports, and various temporary pipe panel structures. Each set includes 14 galvanized panel clamps, along with necessary hardware, ensuring a robust and reliable assembly.

Figure 1.1: Example application of GREEN PARTY Panel Clamps connecting two party tents.
2. Safety Information
Please read and understand all safety instructions before installing or using the GREEN PARTY Panel Clamps. Failure to follow these instructions may result in injury or damage to property.
- Always wear appropriate personal protective equipment (PPE), such as gloves, during installation to prevent cuts or pinches.
- Ensure all connections are tight and secure before applying any load or leaving the structure unattended.
- Do not overtighten bolts, as this may damage the pipes or clamps.
- Inspect clamps and pipes regularly for signs of wear, corrosion, or damage. Replace any damaged components immediately.
- Do not use these clamps for purposes other than those specified (connecting 35mm round rails and 38mm round posts for temporary structures).
- In adverse weather conditions (strong winds, heavy snow), consider disassembling temporary structures to prevent damage.
3. Package Contents
Verify that all components listed below are present and undamaged before beginning installation. If any parts are missing or damaged, please contact customer support.

Figure 3.1: Packing List for GREEN PARTY Panel Clamps (14 Sets).
- 14 x Galvanized Panel Clamps: Designed to connect 35mm round rails and 38mm round posts. Each clamp includes carriage bolts and nuts for secure fastening.

Figure 3.2: Galvanized Panel Clamp.
- 50 x Ball Bungees: Elastic cords with a ball end, used for securing tarps or panels to the frame.

Figure 3.3: Ball Bungee.
- 1 x White Tarp: A durable white tarp, approximately 1.4 FT x 39 FT, for covering or enclosing sections of the structure.

Figure 3.4: White Tarp.
4. Installation Instructions
The GREEN PARTY Panel Clamps are designed for easy and efficient installation. Follow these steps to securely connect your tent panels or pipe frames.
4.1 Preparing the Pipes
Ensure that the round rails (35mm diameter) and round posts (38mm diameter) you intend to connect are clean, free of debris, and properly aligned. The clamps are specifically sized for these dimensions to ensure a snug fit.
4.2 Attaching the Clamps
- Position the two pipe sections you wish to connect parallel to each other, ensuring they are at the desired distance for the clamp.
- Place one half of the galvanized panel clamp around one pipe section and the other half around the second pipe section.
- Align the holes on both halves of the clamp. Insert the carriage bolts through the aligned holes.
- Thread the nuts onto the carriage bolts and hand-tighten them initially.
- Using an appropriate wrench (not included), gradually tighten the nuts until the clamp firmly grips both pipe sections. Do not overtighten.

Figure 4.1: Panel clamp connecting two vertical tent poles.

Figure 4.2: Clamps used to expand a tent structure, showing detailed connections.
4.3 Securing Panels/Tarps (Optional)
If your application involves securing tarps or fabric panels, use the provided ball bungees:
- Locate the grommets or attachment points on your tarp or panel.
- Pass the elastic loop of a ball bungee through the grommet.
- Wrap the loop around a pipe section of the tent frame.
- Pull the ball end through the loop to create a secure, tensioned connection.
- Repeat for all necessary attachment points to ensure the tarp is taut and secure.

Figure 4.3: Tarp secured to tent frame using ball bungees.
5. Usage and Applications
GREEN PARTY Panel Clamps are versatile tools designed for various temporary structural applications:
- Party Tent Expansion: Connect multiple party tent frames together to create larger covered areas for events.
- Carport Extension: Expand existing carports or construct multi-bay carports by joining frame sections.
- Temporary Pipe Panel Structures: Ideal for creating custom temporary enclosures, greenhouses, or storage solutions using round pipe frames.
- Chain Link Fence Clamps: Can be adapted for securing chain link fence panels to round posts, providing a robust connection.
6. Maintenance
Proper maintenance will extend the lifespan of your GREEN PARTY Panel Clamps and ensure continued safe operation.
- Regular Inspection: Periodically inspect all clamps, bolts, and nuts for signs of wear, rust, deformation, or loosening.
- Cleaning: Clean clamps with a damp cloth to remove dirt and debris. For stubborn grime, a mild soap solution can be used. Ensure they are thoroughly dried to prevent rust.
- Lubrication: If bolts become difficult to turn, apply a small amount of silicone-based lubricant to the threads.
- Storage: When not in use, store clamps in a dry, cool place away from direct sunlight and extreme temperatures to prevent corrosion and material degradation.
- Tarp Care: If using the included tarp, clean it with water and mild soap. Ensure it is completely dry before folding and storing to prevent mold and mildew.
7. Troubleshooting
This section addresses common issues you might encounter during the use of your panel clamps.
| Problem | Possible Cause | Solution |
|---|---|---|
| Clamps do not fit pipes. | Incorrect pipe diameter. Clamps are designed for 35mm rails and 38mm posts. | Verify pipe diameters. Do not force clamps onto incompatible pipes. |
| Clamps slip or loosen. | Nuts are not tightened sufficiently. Pipes are oily or dirty. | Ensure nuts are tightened firmly. Clean pipe surfaces before clamping. |
| Bolts are difficult to turn. | Threads are dirty or corroded. | Clean threads and apply a small amount of lubricant. |
| Tarp sags or comes loose. | Insufficient bungees used or bungees are not taut. | Use more bungees if necessary. Ensure bungees are pulled taut and securely fastened. |
8. Specifications
| Product Name | GREEN PARTY Panel Clamps |
| Model Number | 20x40 FT (14 Sets) |
| Brand | GREEN PARTY |
| Material | Galvanized Metal |
| Compatible Rail Diameter | 35mm (approx. 1.38 inches) |
| Compatible Post Diameter | 38mm (approx. 1.5 inches) |
| Quantity per Set | 14 Clamps |
| Included Accessories | Carriage bolts, nuts, 50 Ball Bungees, 1 White Tarp (approx. 1.4 FT x 39 FT) |
| Color | White (Tarp), Silver (Clamps) |
| ASIN | B0CYPQR27X |
9. Warranty and Customer Support
GREEN PARTY is committed to providing high-quality products and excellent customer service. Your purchase is backed by a 5*12H life-time professional customer service warranty.
If you have any questions, concerns, or require assistance with your GREEN PARTY Panel Clamps, please do not hesitate to contact our customer support team. We are here to assist you with any inquiries regarding installation, usage, or product issues.
For support, please refer to the contact information provided on your purchase receipt or visit the official GREEN PARTY store on Amazon: GREEN PARTY Amazon Store.