BoxWave PortChanger

BoxWave USB-C to USB-A OTG PortChanger Instruction Manual

Model: PortChanger (2-Pack)

1. Introduction

This manual provides instructions for the BoxWave USB-C to USB-A OTG PortChanger. This device allows you to connect standard USB-A peripherals to your USB Type-C enabled device, facilitating data transfer and expanded functionality.

2. Product Overview

The BoxWave PortChanger is a compact adapter designed to convert a USB Type-C port into a traditional USB Type-A port. It supports On-The-Go (OTG) functionality, enabling your USB-C device to act as a host for USB-A peripherals.

  • Converts USB Type-C to USB Type-A.
  • Supports OTG protocol for connecting various USB devices.
  • Compact size (approximately 1.25 inches long) for portability.
  • Includes a strap attachment for easy carrying.
  • Provided in a 2-pack for convenience.
Two BoxWave USB-C to USB-A PortChanger adapters
Image: Two BoxWave USB-C to USB-A PortChanger adapters, each with a small lanyard attached, showcasing their compact design and the USB-C male connector on one end and a USB-A female port on the other.

3. Setup

  1. Identify the USB Type-C port on your compatible device (e.g., smartphone, tablet, laptop).
  2. Insert the USB Type-C end of the PortChanger into your device's USB Type-C port. Ensure it is fully seated.
  3. Connect your desired USB Type-A peripheral (e.g., flash drive, mouse, keyboard, USB hub) into the USB Type-A female port of the PortChanger.
  4. Your device should automatically recognize the connected peripheral. No additional drivers are typically required for standard devices.
PortChanger connected to laptop with USB hub
Image: A BoxWave PortChanger connected to the USB-C port of a laptop, with a silver USB hub then connected to the PortChanger, demonstrating how to expand connectivity.

4. Operating Instructions

4.1. Connecting a USB Mouse or Keyboard

To use a USB mouse or keyboard with your USB-C device:

  1. Follow the setup steps to connect the PortChanger to your device.
  2. Plug the USB-A connector of your mouse or keyboard into the PortChanger's USB-A port.
  3. Your device's operating system should detect the peripheral, allowing immediate use.
PortChanger connected to laptop with USB mouse
Image: A BoxWave PortChanger connected to a laptop's USB-C port, with a black USB mouse connected to the PortChanger, illustrating direct peripheral connection.

4.2. Transferring Data with a USB Flash Drive

To transfer data using a USB flash drive:

  1. Connect the PortChanger to your USB-C device.
  2. Insert your USB-A flash drive into the PortChanger's USB-A port.
  3. Access the file manager or appropriate application on your device to browse the contents of the flash drive.
  4. You can now transfer files between your device and the flash drive.
PortChanger connected to smartphone with USB flash drive
Image: A BoxWave PortChanger connected to a smartphone, with a gold USB flash drive inserted into the adapter, showing data transfer icons on the phone screen.

4.3. Using with Other USB-A Devices

The PortChanger is compatible with various standard USB-A devices, including game controllers, printers, and other USB storage devices. Ensure your USB-C device supports OTG functionality for the specific peripheral you intend to use.

5. Maintenance

  • Keep the PortChanger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the adapter to extreme temperatures or moisture.
  • Store the PortChanger in a safe place when not in use, ideally using the included strap to prevent loss.
  • Do not attempt to disassemble or modify the adapter, as this may void any limited support.

6. Troubleshooting

6.1. Device Not Recognized

  • Ensure the PortChanger is fully inserted into your device's USB-C port.
  • Ensure the USB-A peripheral is fully inserted into the PortChanger.
  • Try connecting a different USB-A peripheral to verify if the issue is with the PortChanger or the peripheral.
  • Restart your USB-C device.
  • Verify that your USB-C device supports OTG functionality.

6.2. Slow Data Transfer

  • Data transfer speeds can vary depending on the USB version of your device and the connected peripheral. Ensure both support the highest possible USB standard for optimal performance.
  • Avoid transferring very large files while other intensive tasks are running on your device.

6.3. Adapter Feels Loose

  • While the PortChanger is designed for a secure fit, slight movement is normal. If it consistently disconnects, ensure the ports on both your device and the peripheral are clean and undamaged.

7. Specifications

FeatureDetail
ModelPortChanger
Connector TypeUSB Type-C Male to USB Type-A Female
ProtocolUSB OTG (On-The-Go)
DimensionsApproximately 1.25 inches (length)
Weight0.3 ounces
ColorSlate Black
Package Contents2 x BoxWave PortChanger Adapters
CompatibilityDevices with USB Type-C port supporting OTG (e.g., Tibuta W120)
Close-up of two PortChangers
Image: A close-up view of two BoxWave PortChanger adapters, one in slate black and another in silver, highlighting the USB-C connector and the USB-A port.

8. Warranty and Support

BoxWave provides limited third-party technical support for the Tibuta W120 when used with this product. This support is limited to up to three inquiries via electronic messaging. Please note that BoxWave is not affiliated with or endorsed by Tibuta. For general product inquiries or issues with the PortChanger itself, please contact BoxWave customer support through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.